From: Nishanth Menon <nm@ti.com>
To: "Benoît Cousson" <benoit.cousson@linaro.org>,
"Tony Lindgren" <tony@atomide.com>
Cc: <linux-omap@vger.kernel.org>,
<devicetree-discuss@lists.ozlabs.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, J Keerthy <j-keerthy@ti.com>,
Nishanth Menon <nm@ti.com>
Subject: [PATCH 2/9] ARM: dts: omap5-uevm: update SMPS9 settings
Date: Wed, 17 Jul 2013 11:45:31 -0500 [thread overview]
Message-ID: <1374079538-19548-3-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1374079538-19548-1-git-send-email-nm@ti.com>
commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7
(ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes)
introduced regulator entries for OMAP5uEVM.
However, The regulator information is based on an older temporary
pre-production board variant and does not reflect production board
750-2628-XXX boards.
SMPS9 supplies TWL6040 over VDDA_2v1_AUD. This regulator needs to be
enabled only when audio is active. Since it does not come active by
default, it does not require "always-on" or "boot-on".
Reported-by: Marc Jüttner <m-juettner@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index b430b8f..6709f1e 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -331,8 +331,6 @@
regulator-name = "smps9";
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
- regulator-always-on;
- regulator-boot-on;
ti,smps-range = <0x80>;
};
--
1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>
To: "Benoît Cousson"
<benoit.cousson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: Nishanth Menon <nm-l0cyMroinI0@public.gmane.org>,
J Keerthy <j-keerthy-l0cyMroinI0@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH 2/9] ARM: dts: omap5-uevm: update SMPS9 settings
Date: Wed, 17 Jul 2013 11:45:31 -0500 [thread overview]
Message-ID: <1374079538-19548-3-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1374079538-19548-1-git-send-email-nm-l0cyMroinI0@public.gmane.org>
commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7
(ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes)
introduced regulator entries for OMAP5uEVM.
However, The regulator information is based on an older temporary
pre-production board variant and does not reflect production board
750-2628-XXX boards.
SMPS9 supplies TWL6040 over VDDA_2v1_AUD. This regulator needs to be
enabled only when audio is active. Since it does not come active by
default, it does not require "always-on" or "boot-on".
Reported-by: Marc Jüttner <m-juettner@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index b430b8f..6709f1e 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -331,8 +331,6 @@
regulator-name = "smps9";
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
- regulator-always-on;
- regulator-boot-on;
ti,smps-range = <0x80>;
};
--
1.7.9.5
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
WARNING: multiple messages have this Message-ID (diff)
From: nm@ti.com (Nishanth Menon)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/9] ARM: dts: omap5-uevm: update SMPS9 settings
Date: Wed, 17 Jul 2013 11:45:31 -0500 [thread overview]
Message-ID: <1374079538-19548-3-git-send-email-nm@ti.com> (raw)
In-Reply-To: <1374079538-19548-1-git-send-email-nm@ti.com>
commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7
(ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes)
introduced regulator entries for OMAP5uEVM.
However, The regulator information is based on an older temporary
pre-production board variant and does not reflect production board
750-2628-XXX boards.
SMPS9 supplies TWL6040 over VDDA_2v1_AUD. This regulator needs to be
enabled only when audio is active. Since it does not come active by
default, it does not require "always-on" or "boot-on".
Reported-by: Marc J?ttner <m-juettner@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
---
arch/arm/boot/dts/omap5-uevm.dts | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index b430b8f..6709f1e 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -331,8 +331,6 @@
regulator-name = "smps9";
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
- regulator-always-on;
- regulator-boot-on;
ti,smps-range = <0x80>;
};
--
1.7.9.5
next prev parent reply other threads:[~2013-07-17 16:48 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-17 16:45 [PATCH 0/9] ARM: dts: omap5-uevm: fixup wrong regulator configuration Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` [PATCH 1/9] ARM: dts: omap5-uevm: document regulator signals used on the actual board Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon [this message]
2013-07-17 16:45 ` [PATCH 2/9] ARM: dts: omap5-uevm: update SMPS9 settings Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` [PATCH 3/9] ARM: dts: omap5-uevm: update and disable unused regulators LDO[28] Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` [PATCH 4/9] ARM: dts: omap5-uevm: update LDO1 voltage to 1.5V and settings Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` [PATCH 5/9] ARM: dts: omap5-uevm: update LDO3 " Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` [PATCH 6/9] ARM: dts: omap5-uevm: update LDO4 " Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` [PATCH 7/9] ARM: dts: omap5-uevm: update LDO6 voltage to 1.2V Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` [PATCH 8/9] ARM: dts: omap5-uevm: update LDO7 voltage to 2V and settings Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` [PATCH 9/9] ARM: dts: omap5-uevm: update SDCARD LDO9 and resource REGEN3 Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-17 16:45 ` Nishanth Menon
2013-07-29 9:57 ` [PATCH 0/9] ARM: dts: omap5-uevm: fixup wrong regulator configuration Keerthy
2013-07-29 9:57 ` Keerthy
2013-07-29 9:57 ` Keerthy
2013-07-29 13:17 ` Nishanth Menon
2013-07-29 13:17 ` Nishanth Menon
2013-07-29 13:17 ` Nishanth Menon
2013-07-29 13:39 ` Benoit Cousson
2013-07-29 13:39 ` Benoit Cousson
2013-07-29 14:13 ` Nishanth Menon
2013-07-29 14:13 ` Nishanth Menon
2013-07-29 14:13 ` Nishanth Menon
[not found] ` <CADz42=M8LQ=i2q30=JJU+F-Qx89D1PwU7pW3DH7F1iYiC8-pFA@mail.gmail.com>
2013-07-29 14:34 ` Nishanth Menon
2013-07-29 14:34 ` Nishanth Menon
2013-07-29 17:03 ` [PATCH V2 0/3] " Nishanth Menon
2013-07-29 17:03 ` Nishanth Menon
2013-07-29 17:03 ` Nishanth Menon
2013-07-29 17:03 ` [PATCH V2 1/3] ARM: dts: omap5-uevm: document regulator signals used on the actual board Nishanth Menon
2013-07-29 17:03 ` Nishanth Menon
2013-07-29 17:03 ` Nishanth Menon
2013-07-29 17:03 ` [PATCH V2 2/3] ARM: dts: omap5-uevm: fix regulator configurations mandatory for SoC Nishanth Menon
2013-07-29 17:03 ` Nishanth Menon
2013-07-29 17:03 ` [PATCH V2 3/3] ARM: dts: omap5-uevm: update optional/unused regulator configurations Nishanth Menon
2013-07-29 17:03 ` Nishanth Menon
2013-07-29 22:18 ` [PATCH V2 0/3] ARM: dts: omap5-uevm: fixup wrong regulator configuration Benoit Cousson
2013-07-29 22:18 ` Benoit Cousson
2013-07-30 6:52 ` Tony Lindgren
2013-07-30 6:52 ` Tony Lindgren
2013-07-30 12:18 ` Nishanth Menon
2013-07-30 12:18 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1374079538-19548-3-git-send-email-nm@ti.com \
--to=nm@ti.com \
--cc=benoit.cousson@linaro.org \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.