From: Jan Schmidt <list.xfs@jan-o-sch.net> To: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org, sbehrens@giantdisaster.de Subject: [PATCH v2 2/2] xfstests btrfs/316: test send / receive Date: Wed, 24 Jul 2013 17:07:29 +0200 [thread overview] Message-ID: <1374678449-21780-3-git-send-email-list.xfs@jan-o-sch.net> (raw) In-Reply-To: <1374678449-21780-1-git-send-email-list.xfs@jan-o-sch.net> Basic send / receive functionality test for btrfs. Requires current version of fsstress built (-x support). Relies on fssum tool but can skip the test if it failed to build. Signed-off-by: Jan Schmidt <list.xfs@jan-o-sch.net> --- README | 3 + tests/btrfs/316 | 113 +++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/316.out | 4 ++ tests/btrfs/group | 1 + 4 files changed, 121 insertions(+), 0 deletions(-) create mode 100755 tests/btrfs/316 create mode 100644 tests/btrfs/316.out diff --git a/README b/README index a49ca7c..d287f63 100644 --- a/README +++ b/README @@ -26,6 +26,9 @@ Preparing system for tests (IRIX and Linux): http://www.extra.research.philips.com/udf/, then copy the udf_test binary to xfstests/src/. If you wish to disable UDF verification test set the environment variable DISABLE_UDF_TEST to 1. + - If you wish to run the btrfs send / receive components of the suite + install fssum from + git://git.kernel.org/pub/scm/linux/kernel/git/arne/far-progs.git - create one or two partitions to use for testing diff --git a/tests/btrfs/316 b/tests/btrfs/316 new file mode 100755 index 0000000..2e86428 --- /dev/null +++ b/tests/btrfs/316 @@ -0,0 +1,113 @@ +#! /bin/bash +# FSQA Test No. 314 +# +# Run fsstress to create a reasonably strange file system, make a +# snapshot (base) and run more fsstress. Then take another snapshot +# (incr) and send both snapshots to a temp file. Remake the file +# system and receive from the files. Check both states with fssum. +# +#----------------------------------------------------------------------- +# Copyright (C) 2013 STRATO. All rights reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +#----------------------------------------------------------------------- +# +# creator +owner=list.btrfs@jan-o-sch.net + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=`mktemp -d` +status=1 + +_cleanup() +{ + echo "*** unmount" + umount $SCRATCH_MNT 2>/dev/null + rm -f $tmp.* +} +trap "_cleanup; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_need_to_be_root +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_command $FSSUM_PROG fssum + +rm -f $seqres.full + +workout() +{ + fsz=$1 + ops=$2 + + umount $SCRATCH_DEV >/dev/null 2>&1 + echo "*** mkfs -dsize=$fsz" >>$seqres.full + echo "" >>$seqres.full + _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \ + || _fail "size=$fsz mkfs failed" + run_check _scratch_mount "-o noatime" + + run_check $FSSTRESS_PROG -d $SCRATCH_MNT -n $ops $FSSTRESS_AVOID -x \ + "$BTRFS_UTIL_PROG subvol snap -r $SCRATCH_MNT $SCRATCH_MNT/base" + + run_check $BTRFS_UTIL_PROG subvol snap -r $SCRATCH_MNT $SCRATCH_MNT/incr + + echo "# $BTRFS_UTIL_PROG send $SCRATCH_MNT/base > $tmp/base.snap" \ + >> $seqres.full + $BTRFS_UTIL_PROG send $SCRATCH_MNT/base > $tmp/base.snap 2>> $seqres.full \ + || _fail "failed: '$@'" + echo "# $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base\ + $SCRATCH_MNT/incr > $tmp/incr.snap" >> $seqres.full + $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base \ + $SCRATCH_MNT/incr > $tmp/incr.snap 2>> $seqres.full \ + || _fail "failed: '$@'" + + run_check $FSSUM_PROG -A -f -w $tmp/base.fssum $SCRATCH_MNT/base + run_check $FSSUM_PROG -A -f -w $tmp/incr.fssum -x $SCRATCH_MNT/incr/base \ + $SCRATCH_MNT/incr + + umount $SCRATCH_DEV >/dev/null 2>&1 + echo "*** mkfs -dsize=$fsz" >>$seqres.full + echo "" >>$seqres.full + _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \ + || _fail "size=$fsz mkfs failed" + run_check _scratch_mount "-o noatime" + + run_check $BTRFS_UTIL_PROG receive $SCRATCH_MNT < $tmp/base.snap + run_check $FSSUM_PROG -r $tmp/base.fssum $SCRATCH_MNT/base + + run_check $BTRFS_UTIL_PROG receive $SCRATCH_MNT < $tmp/incr.snap + run_check $FSSUM_PROG -r $tmp/incr.fssum $SCRATCH_MNT/incr +} + +echo "*** test send / receive" + +fssize=`expr 2000 \* 1024 \* 1024` +ops=200 + +workout $fssize $ops + +echo "*** done" +status=0 +exit diff --git a/tests/btrfs/316.out b/tests/btrfs/316.out new file mode 100644 index 0000000..4564c85 --- /dev/null +++ b/tests/btrfs/316.out @@ -0,0 +1,4 @@ +QA output created by 316 +*** test send / receive +*** done +*** unmount diff --git a/tests/btrfs/group b/tests/btrfs/group index bc6c256..11d708a 100644 --- a/tests/btrfs/group +++ b/tests/btrfs/group @@ -9,3 +9,4 @@ 276 auto rw metadata 284 auto 307 auto quick +316 auto rw metadata -- 1.7.2.5
WARNING: multiple messages have this Message-ID (diff)
From: Jan Schmidt <list.xfs@jan-o-sch.net> To: xfs@oss.sgi.com Cc: sbehrens@giantdisaster.de, linux-btrfs@vger.kernel.org Subject: [PATCH v2 2/2] xfstests btrfs/316: test send / receive Date: Wed, 24 Jul 2013 17:07:29 +0200 [thread overview] Message-ID: <1374678449-21780-3-git-send-email-list.xfs@jan-o-sch.net> (raw) In-Reply-To: <1374678449-21780-1-git-send-email-list.xfs@jan-o-sch.net> Basic send / receive functionality test for btrfs. Requires current version of fsstress built (-x support). Relies on fssum tool but can skip the test if it failed to build. Signed-off-by: Jan Schmidt <list.xfs@jan-o-sch.net> --- README | 3 + tests/btrfs/316 | 113 +++++++++++++++++++++++++++++++++++++++++++++++++++ tests/btrfs/316.out | 4 ++ tests/btrfs/group | 1 + 4 files changed, 121 insertions(+), 0 deletions(-) create mode 100755 tests/btrfs/316 create mode 100644 tests/btrfs/316.out diff --git a/README b/README index a49ca7c..d287f63 100644 --- a/README +++ b/README @@ -26,6 +26,9 @@ Preparing system for tests (IRIX and Linux): http://www.extra.research.philips.com/udf/, then copy the udf_test binary to xfstests/src/. If you wish to disable UDF verification test set the environment variable DISABLE_UDF_TEST to 1. + - If you wish to run the btrfs send / receive components of the suite + install fssum from + git://git.kernel.org/pub/scm/linux/kernel/git/arne/far-progs.git - create one or two partitions to use for testing diff --git a/tests/btrfs/316 b/tests/btrfs/316 new file mode 100755 index 0000000..2e86428 --- /dev/null +++ b/tests/btrfs/316 @@ -0,0 +1,113 @@ +#! /bin/bash +# FSQA Test No. 314 +# +# Run fsstress to create a reasonably strange file system, make a +# snapshot (base) and run more fsstress. Then take another snapshot +# (incr) and send both snapshots to a temp file. Remake the file +# system and receive from the files. Check both states with fssum. +# +#----------------------------------------------------------------------- +# Copyright (C) 2013 STRATO. All rights reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +# +#----------------------------------------------------------------------- +# +# creator +owner=list.btrfs@jan-o-sch.net + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=`mktemp -d` +status=1 + +_cleanup() +{ + echo "*** unmount" + umount $SCRATCH_MNT 2>/dev/null + rm -f $tmp.* +} +trap "_cleanup; exit \$status" 0 1 2 3 15 + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter + +# real QA test starts here +_need_to_be_root +_supported_fs btrfs +_supported_os Linux +_require_scratch +_require_command $FSSUM_PROG fssum + +rm -f $seqres.full + +workout() +{ + fsz=$1 + ops=$2 + + umount $SCRATCH_DEV >/dev/null 2>&1 + echo "*** mkfs -dsize=$fsz" >>$seqres.full + echo "" >>$seqres.full + _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \ + || _fail "size=$fsz mkfs failed" + run_check _scratch_mount "-o noatime" + + run_check $FSSTRESS_PROG -d $SCRATCH_MNT -n $ops $FSSTRESS_AVOID -x \ + "$BTRFS_UTIL_PROG subvol snap -r $SCRATCH_MNT $SCRATCH_MNT/base" + + run_check $BTRFS_UTIL_PROG subvol snap -r $SCRATCH_MNT $SCRATCH_MNT/incr + + echo "# $BTRFS_UTIL_PROG send $SCRATCH_MNT/base > $tmp/base.snap" \ + >> $seqres.full + $BTRFS_UTIL_PROG send $SCRATCH_MNT/base > $tmp/base.snap 2>> $seqres.full \ + || _fail "failed: '$@'" + echo "# $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base\ + $SCRATCH_MNT/incr > $tmp/incr.snap" >> $seqres.full + $BTRFS_UTIL_PROG send -p $SCRATCH_MNT/base \ + $SCRATCH_MNT/incr > $tmp/incr.snap 2>> $seqres.full \ + || _fail "failed: '$@'" + + run_check $FSSUM_PROG -A -f -w $tmp/base.fssum $SCRATCH_MNT/base + run_check $FSSUM_PROG -A -f -w $tmp/incr.fssum -x $SCRATCH_MNT/incr/base \ + $SCRATCH_MNT/incr + + umount $SCRATCH_DEV >/dev/null 2>&1 + echo "*** mkfs -dsize=$fsz" >>$seqres.full + echo "" >>$seqres.full + _scratch_mkfs_sized $fsz >>$seqres.full 2>&1 \ + || _fail "size=$fsz mkfs failed" + run_check _scratch_mount "-o noatime" + + run_check $BTRFS_UTIL_PROG receive $SCRATCH_MNT < $tmp/base.snap + run_check $FSSUM_PROG -r $tmp/base.fssum $SCRATCH_MNT/base + + run_check $BTRFS_UTIL_PROG receive $SCRATCH_MNT < $tmp/incr.snap + run_check $FSSUM_PROG -r $tmp/incr.fssum $SCRATCH_MNT/incr +} + +echo "*** test send / receive" + +fssize=`expr 2000 \* 1024 \* 1024` +ops=200 + +workout $fssize $ops + +echo "*** done" +status=0 +exit diff --git a/tests/btrfs/316.out b/tests/btrfs/316.out new file mode 100644 index 0000000..4564c85 --- /dev/null +++ b/tests/btrfs/316.out @@ -0,0 +1,4 @@ +QA output created by 316 +*** test send / receive +*** done +*** unmount diff --git a/tests/btrfs/group b/tests/btrfs/group index bc6c256..11d708a 100644 --- a/tests/btrfs/group +++ b/tests/btrfs/group @@ -9,3 +9,4 @@ 276 auto rw metadata 284 auto 307 auto quick +316 auto rw metadata -- 1.7.2.5 _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2013-07-24 15:38 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-07-24 15:07 [PATCH v2 0/2] xfstest btrfs/316: test send / receive (was: btrfs/314) Jan Schmidt 2013-07-24 15:07 ` Jan Schmidt 2013-07-24 15:07 ` [PATCH v2 1/2] xfstests: add fssum tool Jan Schmidt 2013-07-24 15:07 ` Jan Schmidt 2013-08-06 20:42 ` Josef Bacik 2013-08-06 20:42 ` Josef Bacik 2013-07-24 15:07 ` Jan Schmidt [this message] 2013-07-24 15:07 ` [PATCH v2 2/2] xfstests btrfs/316: test send / receive Jan Schmidt 2013-08-06 20:43 ` Josef Bacik 2013-08-06 20:43 ` Josef Bacik
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1374678449-21780-3-git-send-email-list.xfs@jan-o-sch.net \ --to=list.xfs@jan-o-sch.net \ --cc=linux-btrfs@vger.kernel.org \ --cc=sbehrens@giantdisaster.de \ --cc=xfs@oss.sgi.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.