From: Stefan Behrens <sbehrens@giantdisaster.de> To: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Subject: [PATCH V2] xfstests: redirect output in btrfs/003 Date: Fri, 16 Aug 2013 17:18:43 +0200 [thread overview] Message-ID: <1376666323-27012-1-git-send-email-sbehrens@giantdisaster.de> (raw) This test failed for me with output from 'btrfs balance': QA output created by 003 +Done, had to relocate 4 out of 4 chunks +Done, had to relocate 5 out of 5 chunks Silence is golden Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> --- V1 -> V2: Redirect errors to $seqres.full as proposed by Eric. tests/btrfs/003 | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/tests/btrfs/003 b/tests/btrfs/003 index 3790935..5c88651 100755 --- a/tests/btrfs/003 +++ b/tests/btrfs/003 @@ -52,11 +52,13 @@ _require_scratch _require_scratch_dev_pool _require_deletable_scratch_dev_pool +rm -f $seqres.full + # Test cases related to raid in btrfs _test_raid0() { export MKFS_OPTIONS="-m raid0 -d raid0" - _scratch_mkfs $SCRATCH_DEV_POOL > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs $SCRATCH_DEV_POOL >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -66,7 +68,7 @@ _test_raid0() _test_raid1() { export MKFS_OPTIONS="-m raid1 -d raid1" - _scratch_mkfs $SCRATCH_DEV_POOL > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs $SCRATCH_DEV_POOL >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -76,7 +78,7 @@ _test_raid1() _test_raid10() { export MKFS_OPTIONS="-m raid10 -d raid10" - _scratch_mkfs $SCRATCH_DEV_POOL > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs $SCRATCH_DEV_POOL >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -86,7 +88,7 @@ _test_raid10() _test_single() { export MKFS_OPTIONS="-m single -d single" - _scratch_mkfs $SCRATCH_DEV_POOL > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs $SCRATCH_DEV_POOL >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -102,14 +104,14 @@ _test_add() n=$(($n-1)) export MKFS_OPTIONS="" - _scratch_mkfs > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 for i in `seq 1 $n`; do - $BTRFS_UTIL_PROG device add ${devs[$i]} $SCRATCH_MNT > /dev/null 2>&1 || _fail "device add failed" + $BTRFS_UTIL_PROG device add ${devs[$i]} $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "device add failed" done - $BTRFS_UTIL_PROG filesystem balance $SCRATCH_MNT || _fail "balance failed" + $BTRFS_UTIL_PROG filesystem balance $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "balance failed" umount $SCRATCH_MNT } @@ -127,7 +129,7 @@ _test_replace() ds=${devs[@]:0:$n} export MKFS_OPTIONS="-m raid1 -d raid1" - _scratch_mkfs "$ds" > /dev/null 2>&1 || _fail "tr: mkfs failed" + _scratch_mkfs "$ds" >> $seqres.full 2>&1 || _fail "tr: mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -143,16 +145,16 @@ _test_replace() _devmgt_remove ${DEVHTL} dev_removed=1 - $BTRFS_UTIL_PROG fi show $SCRATCH_DEV | grep "Some devices missing" > /dev/null || _fail \ + $BTRFS_UTIL_PROG fi show $SCRATCH_DEV | grep "Some devices missing" >> $seqres.full || _fail \ "btrfs did not report device missing" # add a new disk to btrfs ds=${devs[@]:$(($n)):1} - $BTRFS_UTIL_PROG device add ${ds} $SCRATCH_MNT > /dev/null 2>&1 || _fail "dev add failed" + $BTRFS_UTIL_PROG device add ${ds} $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "dev add failed" # in some system balance fails if there is no delay (a bug) # putting sleep 10 to work around as of now # sleep 10 - $BTRFS_UTIL_PROG filesystem balance $SCRATCH_MNT || _fail "dev balance failed" + $BTRFS_UTIL_PROG filesystem balance $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "dev balance failed" # cleaup. add the removed disk umount $SCRATCH_MNT @@ -162,7 +164,7 @@ _test_replace() _test_remove() { - _scratch_mkfs "$SCRATCH_DEV_POOL" > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs "$SCRATCH_DEV_POOL" >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -170,7 +172,7 @@ _test_remove() # pick last dev in the list dev_del=`echo ${SCRATCH_DEV_POOL} | awk '{print $NF}'` $BTRFS_UTIL_PROG device delete $dev_del $SCRATCH_MNT || _fail "btrfs device delete failed" - $BTRFS_UTIL_PROG filesystem show $SCRATCH_DEV 2>&1 | grep $dev_del > /dev/null && _fail "btrfs still shows the deleted dev" + $BTRFS_UTIL_PROG filesystem show $SCRATCH_DEV 2>&1 | grep $dev_del >> $seqres.full && _fail "btrfs still shows the deleted dev" umount $SCRATCH_MNT } -- 1.8.3.4
WARNING: multiple messages have this Message-ID (diff)
From: Stefan Behrens <sbehrens@giantdisaster.de> To: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Subject: [PATCH V2] xfstests: redirect output in btrfs/003 Date: Fri, 16 Aug 2013 17:18:43 +0200 [thread overview] Message-ID: <1376666323-27012-1-git-send-email-sbehrens@giantdisaster.de> (raw) This test failed for me with output from 'btrfs balance': QA output created by 003 +Done, had to relocate 4 out of 4 chunks +Done, had to relocate 5 out of 5 chunks Silence is golden Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> --- V1 -> V2: Redirect errors to $seqres.full as proposed by Eric. tests/btrfs/003 | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/tests/btrfs/003 b/tests/btrfs/003 index 3790935..5c88651 100755 --- a/tests/btrfs/003 +++ b/tests/btrfs/003 @@ -52,11 +52,13 @@ _require_scratch _require_scratch_dev_pool _require_deletable_scratch_dev_pool +rm -f $seqres.full + # Test cases related to raid in btrfs _test_raid0() { export MKFS_OPTIONS="-m raid0 -d raid0" - _scratch_mkfs $SCRATCH_DEV_POOL > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs $SCRATCH_DEV_POOL >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -66,7 +68,7 @@ _test_raid0() _test_raid1() { export MKFS_OPTIONS="-m raid1 -d raid1" - _scratch_mkfs $SCRATCH_DEV_POOL > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs $SCRATCH_DEV_POOL >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -76,7 +78,7 @@ _test_raid1() _test_raid10() { export MKFS_OPTIONS="-m raid10 -d raid10" - _scratch_mkfs $SCRATCH_DEV_POOL > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs $SCRATCH_DEV_POOL >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -86,7 +88,7 @@ _test_raid10() _test_single() { export MKFS_OPTIONS="-m single -d single" - _scratch_mkfs $SCRATCH_DEV_POOL > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs $SCRATCH_DEV_POOL >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -102,14 +104,14 @@ _test_add() n=$(($n-1)) export MKFS_OPTIONS="" - _scratch_mkfs > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 for i in `seq 1 $n`; do - $BTRFS_UTIL_PROG device add ${devs[$i]} $SCRATCH_MNT > /dev/null 2>&1 || _fail "device add failed" + $BTRFS_UTIL_PROG device add ${devs[$i]} $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "device add failed" done - $BTRFS_UTIL_PROG filesystem balance $SCRATCH_MNT || _fail "balance failed" + $BTRFS_UTIL_PROG filesystem balance $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "balance failed" umount $SCRATCH_MNT } @@ -127,7 +129,7 @@ _test_replace() ds=${devs[@]:0:$n} export MKFS_OPTIONS="-m raid1 -d raid1" - _scratch_mkfs "$ds" > /dev/null 2>&1 || _fail "tr: mkfs failed" + _scratch_mkfs "$ds" >> $seqres.full 2>&1 || _fail "tr: mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -143,16 +145,16 @@ _test_replace() _devmgt_remove ${DEVHTL} dev_removed=1 - $BTRFS_UTIL_PROG fi show $SCRATCH_DEV | grep "Some devices missing" > /dev/null || _fail \ + $BTRFS_UTIL_PROG fi show $SCRATCH_DEV | grep "Some devices missing" >> $seqres.full || _fail \ "btrfs did not report device missing" # add a new disk to btrfs ds=${devs[@]:$(($n)):1} - $BTRFS_UTIL_PROG device add ${ds} $SCRATCH_MNT > /dev/null 2>&1 || _fail "dev add failed" + $BTRFS_UTIL_PROG device add ${ds} $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "dev add failed" # in some system balance fails if there is no delay (a bug) # putting sleep 10 to work around as of now # sleep 10 - $BTRFS_UTIL_PROG filesystem balance $SCRATCH_MNT || _fail "dev balance failed" + $BTRFS_UTIL_PROG filesystem balance $SCRATCH_MNT >> $seqres.full 2>&1 || _fail "dev balance failed" # cleaup. add the removed disk umount $SCRATCH_MNT @@ -162,7 +164,7 @@ _test_replace() _test_remove() { - _scratch_mkfs "$SCRATCH_DEV_POOL" > /dev/null 2>&1 || _fail "mkfs failed" + _scratch_mkfs "$SCRATCH_DEV_POOL" >> $seqres.full 2>&1 || _fail "mkfs failed" _scratch_mount dirp=`mktemp -duq $SCRATCH_MNT/dir.XXXXXX` _populate_fs -n 1 -f 20 -d 10 -r $dirp -s 10 @@ -170,7 +172,7 @@ _test_remove() # pick last dev in the list dev_del=`echo ${SCRATCH_DEV_POOL} | awk '{print $NF}'` $BTRFS_UTIL_PROG device delete $dev_del $SCRATCH_MNT || _fail "btrfs device delete failed" - $BTRFS_UTIL_PROG filesystem show $SCRATCH_DEV 2>&1 | grep $dev_del > /dev/null && _fail "btrfs still shows the deleted dev" + $BTRFS_UTIL_PROG filesystem show $SCRATCH_DEV 2>&1 | grep $dev_del >> $seqres.full && _fail "btrfs still shows the deleted dev" umount $SCRATCH_MNT } -- 1.8.3.4 _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs
next reply other threads:[~2013-08-16 15:18 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-08-16 15:18 Stefan Behrens [this message] 2013-08-16 15:18 ` [PATCH V2] xfstests: redirect output in btrfs/003 Stefan Behrens 2013-08-16 15:19 ` Eric Sandeen 2013-08-16 15:19 ` Eric Sandeen 2013-08-16 15:59 ` Rich Johnston 2013-08-16 15:59 ` Rich Johnston
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1376666323-27012-1-git-send-email-sbehrens@giantdisaster.de \ --to=sbehrens@giantdisaster.de \ --cc=linux-btrfs@vger.kernel.org \ --cc=xfs@oss.sgi.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.