From: al.stone@linaro.org
To: linux-samsung-soc@vger.kernel.org
Cc: linaro-kernel@lists.linaro.org, linaro-acpi@lists.linaro.org,
Al Stone <ahs3@redhat.com>, Al Stone <al.stone@linaro.org>
Subject: [PATCH] ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250
Date: Fri, 6 Sep 2013 14:09:52 -0600 [thread overview]
Message-ID: <1378498192-5163-1-git-send-email-al.stone@linaro.org> (raw)
From: Al Stone <ahs3@redhat.com>
Corrects an obvious typo in the Arndale pinctrl descriptions in DT.
The samsung-pinctrl driver uses the correct name.
Signed-off-by: Al Stone <al.stone@linaro.org>
---
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 44 +++++++++++++++----------------
1 file changed, 22 insertions(+), 22 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 656e381..031e198 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -210,21 +210,21 @@
samsung,pins = "gpa0-2", "gpa0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
i2c2_hs_bus: i2c2-hs-bus {
samsung,pins = "gpa0-6", "gpa0-7";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
uart2_data: uart2-data {
@@ -238,21 +238,21 @@
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
i2c3_bus: i2c3-bus {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
i2c3_hs_bus: i2c3-hs-bus {
samsung,pins = "gpa1-2", "gpa1-3";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
uart3_data: uart3-data {
@@ -273,14 +273,14 @@
samsung,pins = "gpa2-0", "gpa2-1";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
i2c5_bus: i2c5-bus {
samsung,pins = "gpa2-2", "gpa2-3";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
spi1_bus: spi1-bus {
@@ -376,14 +376,14 @@
samsung,pins = "gpb3-0", "gpb3-1";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
i2c1_hs_bus: i2c1-hs-bus {
samsung,pins = "gpb3-2", "gpb3-3";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
sd0_clk: sd0-clk {
@@ -551,14 +551,14 @@
samsung,pins = "gpd0-2", "gpd0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
dp_hpd: dp_hpd {
samsung,pins = "gpx0-7";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
};
@@ -650,42 +650,42 @@
"gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <3>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
cam_i2c2_bus: cam-i2c2-bus {
samsung,pins = "gpe0-6", "gpe1-0";
samsung,pin-function = <4>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
cam_spi1_bus: cam-spi1-bus {
samsung,pins = "gpe0-4", "gpe0-5", "gpf0-2", "gpf0-3";
samsung,pin-function = <4>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
cam_i2c1_bus: cam-i2c1-bus {
samsung,pins = "gpf0-2", "gpf0-3";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
cam_i2c0_bus: cam-i2c0-bus {
samsung,pins = "gpf0-0", "gpf0-1";
samsung,pin-function = <2>;
samsung,pin-pud = <3>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
cam_spi0_bus: cam-spi0-bus {
samsung,pins = "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
cam_bayrgb_bus: cam-bayrgb-bus {
@@ -696,7 +696,7 @@
"gpg2-0", "gpg2-1";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
cam_port_a: cam-port-a {
@@ -705,7 +705,7 @@
"gph1-4", "gph1-5", "gph1-6", "gph1-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
};
@@ -757,7 +757,7 @@
"gpv1-4", "gpv1-5", "gpv1-6", "gpv1-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
c2c_txd: c2c-txd {
@@ -767,7 +767,7 @@
"gpv3-4", "gpv3-5", "gpv3-6", "gpv3-7";
samsung,pin-function = <2>;
samsung,pin-pud = <0>;
- samaung,pin-drv = <0>;
+ samsung,pin-drv = <0>;
};
};
--
1.8.3.1
next reply other threads:[~2013-09-06 20:10 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-06 20:09 al.stone [this message]
2013-09-09 0:24 ` [PATCH] ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250 Jingoo Han
2013-09-12 10:23 ` Kukjin Kim
2013-09-09 9:00 ` Tomasz Figa
2013-09-09 15:11 ` Al Stone
2013-09-12 11:18 ` Tomasz Figa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1378498192-5163-1-git-send-email-al.stone@linaro.org \
--to=al.stone@linaro.org \
--cc=ahs3@redhat.com \
--cc=linaro-acpi@lists.linaro.org \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-samsung-soc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.