From: Eduardo Valentin <eduardo.valentin@ti.com>
To: <swarren@wwwdotorg.org>, <pawel.moll@arm.com>,
<mark.rutland@arm.com>, <ian.campbell@citrix.com>,
<rob.herring@calxeda.com>, <linux@roeck-us.net>,
<rui.zhang@intel.com>, <grant.likely@linaro.org>
Cc: <linux-pm@vger.kernel.org>, <devicetree@vger.kernel.org>,
<lm-sensors@lm-sensors.org>, <linux-kernel@vger.kernel.org>,
Eduardo Valentin <eduardo.valentin@ti.com>
Subject: [PATCH 3/7] arm: dts: dra7: add bandgap entry
Date: Tue, 1 Oct 2013 14:32:20 -0400 [thread overview]
Message-ID: <1380652344-18819-4-git-send-email-eduardo.valentin@ti.com> (raw)
In-Reply-To: <1380652344-18819-1-git-send-email-eduardo.valentin@ti.com>
This patch adds bandgap IP entry on DRA7 dtsi device tree file.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 3a746c2..4e9b159 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -53,6 +53,18 @@
};
};
+ bandgap: bandgap {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c
+ 0x4a002564 0x8
+ 0x4a002574 0x50>;
+ compatible = "ti,dra752-bandgap";
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
--
1.8.2.1.342.gfa7285d
WARNING: multiple messages have this Message-ID (diff)
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
linux@roeck-us.net, rui.zhang@intel.com, grant.likely@linaro.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org,
Eduardo Valentin <eduardo.valentin@ti.com>
Subject: [PATCH 3/7] arm: dts: dra7: add bandgap entry
Date: Tue, 1 Oct 2013 14:32:20 -0400 [thread overview]
Message-ID: <1380652344-18819-4-git-send-email-eduardo.valentin@ti.com> (raw)
In-Reply-To: <1380652344-18819-1-git-send-email-eduardo.valentin@ti.com>
This patch adds bandgap IP entry on DRA7 dtsi device tree file.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 3a746c2..4e9b159 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -53,6 +53,18 @@
};
};
+ bandgap: bandgap {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c
+ 0x4a002564 0x8
+ 0x4a002574 0x50>;
+ compatible = "ti,dra752-bandgap";
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
--
1.8.2.1.342.gfa7285d
WARNING: multiple messages have this Message-ID (diff)
From: Eduardo Valentin <eduardo.valentin@ti.com>
To: swarren@wwwdotorg.org, pawel.moll@arm.com, mark.rutland@arm.com,
ian.campbell@citrix.com, rob.herring@calxeda.com,
linux@roeck-us.net, rui.zhang@intel.com, grant.likely@linaro.org
Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
lm-sensors@lm-sensors.org, linux-kernel@vger.kernel.org,
Eduardo Valentin <eduardo.valentin@ti.com>
Subject: [lm-sensors] [PATCH 3/7] arm: dts: dra7: add bandgap entry
Date: Tue, 01 Oct 2013 18:32:20 +0000 [thread overview]
Message-ID: <1380652344-18819-4-git-send-email-eduardo.valentin@ti.com> (raw)
In-Reply-To: <1380652344-18819-1-git-send-email-eduardo.valentin@ti.com>
This patch adds bandgap IP entry on DRA7 dtsi device tree file.
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
---
arch/arm/boot/dts/dra7.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 3a746c2..4e9b159 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -53,6 +53,18 @@
};
};
+ bandgap: bandgap {
+ reg = <0x4a0021e0 0xc
+ 0x4a00232c 0xc
+ 0x4a002380 0x2c
+ 0x4a0023C0 0x3c
+ 0x4a002564 0x8
+ 0x4a002574 0x50>;
+ compatible = "ti,dra752-bandgap";
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
--
1.8.2.1.342.gfa7285d
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
next prev parent reply other threads:[~2013-10-01 18:34 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-01 18:32 [PATCH 0/7] DRA7: DT thermal support Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 1/7] arm: dts: add dra7 DSPEVE thermal data Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 22:37 ` Nishanth Menon
2013-10-01 22:37 ` [lm-sensors] " Nishanth Menon
2013-10-01 22:37 ` Nishanth Menon
2013-10-02 1:27 ` Eduardo Valentin
2013-10-02 1:27 ` [lm-sensors] " Eduardo Valentin
2013-10-02 1:27 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 2/7] arm: dts: add dra7 IVA " Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 22:33 ` Nishanth Menon
2013-10-01 22:33 ` [lm-sensors] " Nishanth Menon
2013-10-01 22:33 ` Nishanth Menon
2013-10-02 1:26 ` Eduardo Valentin
2013-10-02 1:26 ` [lm-sensors] " Eduardo Valentin
2013-10-02 1:26 ` Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin [this message]
2013-10-01 18:32 ` [lm-sensors] [PATCH 3/7] arm: dts: dra7: add bandgap entry Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 22:46 ` Nishanth Menon
2013-10-01 22:46 ` [lm-sensors] " Nishanth Menon
2013-10-01 22:46 ` Nishanth Menon
2013-10-02 1:28 ` Eduardo Valentin
2013-10-02 1:28 ` [lm-sensors] " Eduardo Valentin
2013-10-02 1:28 ` Eduardo Valentin
2013-11-06 20:23 ` [PATCHv2 " Eduardo Valentin
2013-11-06 20:23 ` [lm-sensors] " Eduardo Valentin
2013-11-06 20:23 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 4/7] arm: dts: add cooling properties on dra7 cpu node Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 5/7] arm: dts: dra7: add thermal data Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 6/7] arm: dts: add tmp102 i2c sensor node on dra7-evm Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 22:51 ` Nishanth Menon
2013-10-01 22:51 ` [lm-sensors] " Nishanth Menon
2013-10-01 22:51 ` Nishanth Menon
2013-10-02 1:32 ` Eduardo Valentin
2013-10-02 1:32 ` [lm-sensors] " Eduardo Valentin
2013-10-02 1:32 ` Eduardo Valentin
2013-10-01 18:32 ` [PATCH 7/7] arm: dts: add thermal zones info on tmp102 for DRA7-EVM Eduardo Valentin
2013-10-01 18:32 ` [lm-sensors] " Eduardo Valentin
2013-10-01 18:32 ` Eduardo Valentin
2013-10-01 22:58 ` [PATCH 0/7] DRA7: DT thermal support Nishanth Menon
2013-10-01 22:58 ` [lm-sensors] " Nishanth Menon
2013-10-01 22:58 ` Nishanth Menon
2013-10-02 1:45 ` Eduardo Valentin
2013-10-02 1:45 ` [lm-sensors] " Eduardo Valentin
2013-10-02 1:45 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1380652344-18819-4-git-send-email-eduardo.valentin@ti.com \
--to=eduardo.valentin@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=ian.campbell@citrix.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rui.zhang@intel.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.