All of lore.kernel.org
 help / color / mirror / Atom feed
From: Valentine Barshak <valentine.barshak@cogentembedded.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH 3/3] arm: shmobile: lager: Add USBHS support
Date: Tue, 08 Oct 2013 19:43:27 +0000	[thread overview]
Message-ID: <1381261407-12606-4-git-send-email-valentine.barshak@cogentembedded.com> (raw)
In-Reply-To: <1381188423-1867-4-git-send-email-valentine.barshak@cogentembedded.com>

This adds USBHS PHY and registers USBHS device if the driver is enabled.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
---
 arch/arm/mach-shmobile/board-lager.c | 115 +++++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)

diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index a8d3ce6..f375eae 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
@@ -29,11 +30,14 @@
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
 #include <linux/platform_data/rcar-du.h>
+#include <linux/platform_data/usb-rcar-gen2-phy.h>
 #include <linux/platform_device.h>
 #include <linux/phy.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/machine.h>
 #include <linux/sh_eth.h>
+#include <linux/usb/phy.h>
+#include <linux/usb/renesas_usbhs.h>
 #include <mach/common.h>
 #include <mach/irqs.h>
 #include <mach/r8a7790.h>
@@ -165,6 +169,107 @@ static const struct resource ether_resources[] __initconst = {
 	DEFINE_RES_IRQ(gic_spi(162)),
 };
 
+/* USBHS */
+#if IS_ENABLED(CONFIG_USB_RENESAS_USBHS_UDC)
+static const struct resource usbhs_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6590000, 0x100),
+	DEFINE_RES_IRQ(gic_spi(107)),
+};
+
+struct usbhs_private {
+	struct renesas_usbhs_platform_info info;
+	struct usb_phy *phy;
+};
+
+#define usbhs_get_priv(pdev) \
+	container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)
+
+static int usbhs_power_ctrl(struct platform_device *pdev,
+				void __iomem *base, int enable)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	if (!priv->phy)
+		return -ENODEV;
+
+	if (enable) {
+		int retval = usb_phy_init(priv->phy);
+
+		if (!retval)
+			retval = usb_phy_set_suspend(priv->phy, 0);
+		return retval;
+	}
+
+	usb_phy_set_suspend(priv->phy, 1);
+	usb_phy_shutdown(priv->phy);
+	return 0;
+}
+
+static int usbhs_hardware_init(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+	struct usb_phy *phy;
+
+	phy = usb_get_phy(USB_PHY_TYPE_USB2);
+	if (IS_ERR(phy))
+		return PTR_ERR(phy);
+
+	priv->phy = phy;
+	return 0;
+}
+
+static int usbhs_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhs_private *priv = usbhs_get_priv(pdev);
+
+	if (!priv->phy)
+		return 0;
+
+	usb_put_phy(priv->phy);
+	priv->phy = NULL;
+	return 0;
+}
+
+static int usbhs_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static struct usbhs_private usbhs_priv __initdata = {
+	.info = {
+		.platform_callback = {
+			.power_ctrl	= usbhs_power_ctrl,
+			.hardware_init	= usbhs_hardware_init,
+			.hardware_exit	= usbhs_hardware_exit,
+			.get_id		= usbhs_get_id,
+		},
+		.driver_param = {
+			.buswait_bwait	= 4,
+		},
+	}
+};
+
+#define lager_register_usbhs()						\
+	platform_device_register_resndata(&platform_bus,		\
+					  "renesas_usbhs", -1,		\
+					  usbhs_resources,		\
+					  ARRAY_SIZE(usbhs_resources),	\
+					  &usbhs_priv.info,		\
+					  sizeof(usbhs_priv.info))
+#else	/* CONFIG_USB_RENESAS_USBHS_UDC */
+#define lager_register_usbhs()
+#endif	/* CONFIG_USB_RENESAS_USBHS_UDC */
+
+/* USBHS PHY */
+static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = {
+	.chan0_pci = 0,	/* Channel 0 is USBHS */
+	.chan2_pci = 1,	/* Channel 2 is PCI USB */
+};
+
+static const struct resource usbhs_phy_resources[] __initconst = {
+	DEFINE_RES_MEM(0xe6590100, 0x100),
+};
+
 static const struct pinctrl_map lager_pinctrl_map[] = {
 	/* DU (CN10: ARGB0, CN13: LVDS) */
 	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7790", "pfc-r8a7790",
@@ -193,6 +298,9 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
 				  "eth_rmii", "eth"),
 	PIN_MAP_MUX_GROUP_DEFAULT("r8a7790-ether", "pfc-r8a7790",
 				  "intc_irq0", "intc"),
+	/* USB0 */
+	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs", "pfc-r8a7790",
+				  "usb0", "usb0"),
 };
 
 static void __init lager_add_standard_devices(void)
@@ -221,6 +329,13 @@ static void __init lager_add_standard_devices(void)
 					  ARRAY_SIZE(ether_resources),
 					  &ether_pdata, sizeof(ether_pdata));
 
+	platform_device_register_resndata(&platform_bus, "usb_phy_rcar_gen2",
+					  -1, usbhs_phy_resources,
+					  ARRAY_SIZE(usbhs_phy_resources),
+					  &usbhs_phy_pdata,
+					  sizeof(usbhs_phy_pdata));
+	lager_register_usbhs();
+
 	lager_add_du_device();
 }
 
-- 
1.8.3.1


  parent reply	other threads:[~2013-10-08 19:43 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-07 23:27 [PATCH 3/3] arm: shmobile: lager: Add USBHS support Valentine Barshak
2013-10-08  3:31 ` Kuninori Morimoto
2013-10-08  8:03 ` Valentine
2013-10-08  9:56 ` Kuninori Morimoto
2013-10-08 19:43 ` Valentine Barshak [this message]
2013-10-09 22:14 ` Valentine Barshak
2013-10-29  4:32 ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1381261407-12606-4-git-send-email-valentine.barshak@cogentembedded.com \
    --to=valentine.barshak@cogentembedded.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.