All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: linux-arm-kernel@lists.infradead.org
Cc: Marek Vasut <marex@denx.de>, Shawn Guo <shawn.guo@linaro.org>,
	Richard Zhu <r65037@freescale.com>, Tejun Heo <tj@kernel.org>,
	Linux-IDE <linux-ide@vger.kernel.org>
Subject: [PATCH V2 4/5] ARM: dts: imx53: Add AHCI SATA DT node
Date: Mon, 18 Nov 2013 15:30:42 +0100	[thread overview]
Message-ID: <1384785043-5027-4-git-send-email-marex@denx.de> (raw)
In-Reply-To: <1384785043-5027-1-git-send-email-marex@denx.de>

The AHCI-IMX driver now supports i.MX53 as well. Add DT node.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Richard Zhu <r65037@freescale.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Linux-IDE <linux-ide@vger.kernel.org>
---
 arch/arm/boot/dts/imx53.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

V2: Use the clock ID macros

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index b330ef7..1ececed 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -86,6 +86,17 @@
 		interrupt-parent = <&tzic>;
 		ranges;
 
+		sata: sata@10000000 {
+			compatible = "fsl,imx53-ahci";
+			reg = <0x10000000 0x1000>;
+			interrupts = <28>;
+			clocks = <&clks IMX5_CLK_SATA_GATE>,
+				 <&clks IMX5_CLK_SATA_PHY>,
+				 <&clks IMX5_CLK_AHB>;
+			clock-names = "sata_gate", "sata_phy", "ahb";
+			status = "disabled";
+		};
+
 		ipu: ipu@18000000 {
 			#crtc-cells = <1>;
 			compatible = "fsl,imx53-ipu";
-- 
1.8.4.2


WARNING: multiple messages have this Message-ID (diff)
From: marex@denx.de (Marek Vasut)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V2 4/5] ARM: dts: imx53: Add AHCI SATA DT node
Date: Mon, 18 Nov 2013 15:30:42 +0100	[thread overview]
Message-ID: <1384785043-5027-4-git-send-email-marex@denx.de> (raw)
In-Reply-To: <1384785043-5027-1-git-send-email-marex@denx.de>

The AHCI-IMX driver now supports i.MX53 as well. Add DT node.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Richard Zhu <r65037@freescale.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Linux-IDE <linux-ide@vger.kernel.org>
---
 arch/arm/boot/dts/imx53.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

V2: Use the clock ID macros

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index b330ef7..1ececed 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -86,6 +86,17 @@
 		interrupt-parent = <&tzic>;
 		ranges;
 
+		sata: sata at 10000000 {
+			compatible = "fsl,imx53-ahci";
+			reg = <0x10000000 0x1000>;
+			interrupts = <28>;
+			clocks = <&clks IMX5_CLK_SATA_GATE>,
+				 <&clks IMX5_CLK_SATA_PHY>,
+				 <&clks IMX5_CLK_AHB>;
+			clock-names = "sata_gate", "sata_phy", "ahb";
+			status = "disabled";
+		};
+
 		ipu: ipu at 18000000 {
 			#crtc-cells = <1>;
 			compatible = "fsl,imx53-ipu";
-- 
1.8.4.2

  parent reply	other threads:[~2013-11-18 14:31 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-18 14:30 [PATCH V3 1/5] ahci: imx: Pull out the clock enable/disable calls Marek Vasut
2013-11-18 14:30 ` Marek Vasut
2013-11-18 14:30 ` [PATCH V3 2/5] ahci: imx: Add i.MX53 support Marek Vasut
2013-11-18 14:30   ` Marek Vasut
2013-11-19  8:48   ` Shawn Guo
2013-11-19  8:48     ` Shawn Guo
2013-11-20  7:34     ` Richard Zhu
2013-11-20  7:34       ` Richard Zhu
2013-11-18 14:30 ` [PATCH V2 3/5] ARM: imx: imx53: Add SATA PHY clock Marek Vasut
2013-11-18 14:30   ` Marek Vasut
2013-11-18 14:30 ` Marek Vasut [this message]
2013-11-18 14:30   ` [PATCH V2 4/5] ARM: dts: imx53: Add AHCI SATA DT node Marek Vasut
2013-11-18 14:30 ` [PATCH V2 5/5] ARM: dts: imx53: Enable AHCI SATA for M53EVK Marek Vasut
2013-11-18 14:30   ` Marek Vasut
2013-11-19  8:26 ` [PATCH V3 1/5] ahci: imx: Pull out the clock enable/disable calls Shawn Guo
2013-11-19  8:26   ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1384785043-5027-4-git-send-email-marex@denx.de \
    --to=marex@denx.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=r65037@freescale.com \
    --cc=shawn.guo@linaro.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.