All of lore.kernel.org
 help / color / mirror / Atom feed
From: Leela Krishna Amudala <l.krishna@samsung.com>
To: linux-samsung-soc@vger.kernel.org, wim@iguana.be
Cc: dianders@chromium.org, kgene.kim@samsung.com, t.figa@samsung.com,
	devicetree@vger.kernel.org, linux-watchdog@vger.kernel.org,
	cpgs@samsung.com, linux@roeck-us.net
Subject: [PATCH V11 2/3] watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register
Date: Thu, 28 Nov 2013 10:04:02 +0530	[thread overview]
Message-ID: <1385613243-3559-3-git-send-email-l.krishna@samsung.com> (raw)
In-Reply-To: <1385613243-3559-1-git-send-email-l.krishna@samsung.com>

Add device tree support for exynos5250 and 5420 SoCs and use syscon regmap interface
to configure AUTOMATIC_WDT_RESET_DISABLE and MASK_WDT_RESET_REQUEST registers of PMU
to mask/unmask enable/disable of watchdog in probe and s2r scenarios.

Signed-off-by: Leela Krishna Amudala <l.krishna@samsung.com>
---
 .../devicetree/bindings/watchdog/samsung-wdt.txt   |   21 ++-
 drivers/watchdog/Kconfig                           |    1 +
 drivers/watchdog/s3c2410_wdt.c                     |  159 ++++++++++++++++++--
 3 files changed, 171 insertions(+), 10 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
index 2aa486c..cfff375 100644
--- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt
@@ -5,10 +5,29 @@ after a preset amount of time during which the WDT reset event has not
 occurred.
 
 Required properties:
-- compatible : should be "samsung,s3c2410-wdt"
+- compatible : should be one among the following
+	(a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs
+	(b) "samsung,exynos5250-wdt" for Exynos5250
+	(c) "samsung,exynos5420-wdt" for Exynos5420
+
 - reg : base physical address of the controller and length of memory mapped
 	region.
 - interrupts : interrupt number to the cpu.
+- samsung,syscon-phandle : reference to syscon node (This property required only
+	in case of compatible being "samsung,exynos5250-wdt" or "samsung,exynos5420-wdt".
+	In case of Exynos5250 and 5420 this property points to syscon node holding the PMU
+	base address)
 
 Optional properties:
 - timeout-sec : contains the watchdog timeout in seconds.
+
+Example:
+
+watchdog@101D0000 {
+	compatible = "samsung,exynos5250-wdt";
+	reg = <0x101D0000 0x100>;
+	interrupts = <0 42 0>;
+	clocks = <&clock 336>;
+	clock-names = "watchdog";
+	samsung,syscon-phandle = <&pmu_syscon>;
+};
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 5be6e91..24738c0 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -188,6 +188,7 @@ config S3C2410_WATCHDOG
 	tristate "S3C2410 Watchdog"
 	depends on HAVE_S3C2410_WATCHDOG
 	select WATCHDOG_CORE
+	select MFD_SYSCON if ARCH_EXYNOS5
 	help
 	  Watchdog timer block in the Samsung SoCs. This will reboot
 	  the system when the timer expires with the watchdog enabled.
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 7d8fd04..47f4dcf 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -40,6 +40,8 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
 
 #define S3C2410_WTCON		0x00
 #define S3C2410_WTDAT		0x04
@@ -60,6 +62,10 @@
 #define CONFIG_S3C2410_WATCHDOG_ATBOOT		(0)
 #define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME	(15)
 
+#define WDT_DISABLE_REG_OFFSET		0x0408
+#define WDT_MASK_RESET_REG_OFFSET	0x040c
+#define QUIRK_NEEDS_PMU_CONFIG		(1 << 0)
+
 static bool nowayout	= WATCHDOG_NOWAYOUT;
 static int tmr_margin;
 static int tmr_atboot	= CONFIG_S3C2410_WATCHDOG_ATBOOT;
@@ -83,6 +89,25 @@ MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
 			"0 to reboot (default 0)");
 MODULE_PARM_DESC(debug, "Watchdog debug, set to >1 for debug (default 0)");
 
+/**
+ * struct s3c2410_wdt_variant - Per-variant config data
+ *
+ * @disable_reg: Offset in pmureg for the register that disables the watchdog
+ * timer reset functionality.
+ * @mask_reset_reg: Offset in pmureg for the register that masks the watchdog
+ * timer reset functionality.
+ * @mask_bit: Bit number for the watchdog timer in the disable register and the
+ * mask reset register.
+ * @quirks: A bitfield of quirks.
+ */
+
+struct s3c2410_wdt_variant {
+	int disable_reg;
+	int mask_reset_reg;
+	int mask_bit;
+	u32 quirks;
+};
+
 struct s3c2410_wdt {
 	struct device		*dev;
 	struct clk		*clock;
@@ -93,8 +118,50 @@ struct s3c2410_wdt {
 	unsigned long		wtdat_save;
 	struct watchdog_device	wdt_device;
 	struct notifier_block	freq_transition;
+	struct s3c2410_wdt_variant *drv_data;
+	struct regmap *pmureg;
 };
 
+static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
+	.quirks = 0
+};
+
+#ifdef CONFIG_OF
+static const struct s3c2410_wdt_variant drv_data_exynos5250  = {
+	.disable_reg = WDT_DISABLE_REG_OFFSET,
+	.mask_reset_reg = WDT_MASK_RESET_REG_OFFSET,
+	.mask_bit = 20,
+	.quirks = QUIRK_NEEDS_PMU_CONFIG
+};
+
+static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
+	.disable_reg = WDT_DISABLE_REG_OFFSET,
+	.mask_reset_reg = WDT_MASK_RESET_REG_OFFSET,
+	.mask_bit = 0,
+	.quirks = QUIRK_NEEDS_PMU_CONFIG
+};
+
+static const struct of_device_id s3c2410_wdt_match[] = {
+	{ .compatible = "samsung,s3c2410-wdt",
+	  .data = &drv_data_s3c2410 },
+	{ .compatible = "samsung,exynos5250-wdt",
+	  .data = &drv_data_exynos5250 },
+	{ .compatible = "samsung,exynos5420-wdt",
+	  .data = &drv_data_exynos5420 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
+#endif
+
+static const struct platform_device_id s3c2410_wdt_ids[] = {
+	{
+		.name = "s3c2410-wdt",
+		.driver_data = (unsigned long)&drv_data_s3c2410,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids);
+
 /* watchdog control routines */
 
 #define DBG(fmt, ...)					\
@@ -110,6 +177,31 @@ static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb)
 	return container_of(nb, struct s3c2410_wdt, freq_transition);
 }
 
+static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
+{
+	int ret;
+	u32 mask_val = 1 << wdt->drv_data->mask_bit;
+	u32 val = 0;
+
+	if (mask)
+		val = mask_val;
+
+	ret = regmap_update_bits(wdt->pmureg,
+			wdt->drv_data->disable_reg,
+			mask_val, val);
+	if (ret < 0)
+		goto error;
+
+	ret = regmap_update_bits(wdt->pmureg,
+			wdt->drv_data->mask_reset_reg,
+			mask_val, val);
+ error:
+	if (ret < 0)
+		dev_err(wdt->dev, "failed to update reg(%d)\n", ret);
+
+	return ret;
+}
+
 static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
 {
 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
@@ -331,6 +423,20 @@ static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
 }
 #endif
 
+/* s3c2410_get_wdt_driver_data */
+static inline struct s3c2410_wdt_variant *
+get_wdt_drv_data(struct platform_device *pdev)
+{
+	if (pdev->dev.of_node) {
+		const struct of_device_id *match;
+		match = of_match_node(s3c2410_wdt_match, pdev->dev.of_node);
+		return (struct s3c2410_wdt_variant *)match->data;
+	} else {
+		return (struct s3c2410_wdt_variant *)
+			platform_get_device_id(pdev)->driver_data;
+	}
+}
+
 static int s3c2410wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev;
@@ -353,6 +459,16 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 	spin_lock_init(&wdt->lock);
 	wdt->wdt_device = s3c2410_wdd;
 
+	wdt->drv_data = get_wdt_drv_data(pdev);
+	if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
+		wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
+							"samsung,syscon-phandle");
+		if (IS_ERR(wdt->pmureg)) {
+			dev_err(dev, "syscon regmap lookup failed.\n");
+			return PTR_ERR(wdt->pmureg);
+		}
+	}
+
 	wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (wdt_irq == NULL) {
 		dev_err(dev, "no irq resource specified\n");
@@ -421,6 +537,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 		goto err_cpufreq;
 	}
 
+	if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
+		ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
+		if (ret < 0)
+			goto err_unregister;
+	}
+
 	if (tmr_atboot && started == 0) {
 		dev_info(dev, "starting watchdog timer\n");
 		s3c2410wdt_start(&wdt->wdt_device);
@@ -445,6 +567,9 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 
 	return 0;
 
+ err_unregister:
+	watchdog_unregister_device(&wdt->wdt_device);
+
  err_cpufreq:
 	s3c2410wdt_cpufreq_deregister(wdt);
 
@@ -458,8 +583,15 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
 
 static int s3c2410wdt_remove(struct platform_device *dev)
 {
+	int ret;
 	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
 
+	if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
+		ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
+		if (ret < 0)
+			return ret;
+	}
+
 	watchdog_unregister_device(&wdt->wdt_device);
 
 	s3c2410wdt_cpufreq_deregister(wdt);
@@ -474,6 +606,9 @@ static void s3c2410wdt_shutdown(struct platform_device *dev)
 {
 	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
 
+	if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG)
+		s3c2410wdt_mask_and_disable_reset(wdt, true);
+
 	s3c2410wdt_stop(&wdt->wdt_device);
 }
 
@@ -481,12 +616,19 @@ static void s3c2410wdt_shutdown(struct platform_device *dev)
 
 static int s3c2410wdt_suspend(struct device *dev)
 {
+	int ret;
 	struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
 
 	/* Save watchdog state, and turn it off. */
 	wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
 	wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);
 
+	if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
+		ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
+		if (ret < 0)
+			return ret;
+	}
+
 	/* Note that WTCNT doesn't need to be saved. */
 	s3c2410wdt_stop(&wdt->wdt_device);
 
@@ -495,6 +637,7 @@ static int s3c2410wdt_suspend(struct device *dev)
 
 static int s3c2410wdt_resume(struct device *dev)
 {
+	int ret;
 	struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
 
 	/* Restore watchdog state. */
@@ -502,6 +645,12 @@ static int s3c2410wdt_resume(struct device *dev)
 	writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */
 	writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);
 
+	if (wdt->drv_data->quirks & QUIRK_NEEDS_PMU_CONFIG) {
+		ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
+		if (ret < 0)
+			return ret;
+	}
+
 	dev_info(dev, "watchdog %sabled\n",
 		(wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
 
@@ -512,18 +661,11 @@ static int s3c2410wdt_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend,
 			s3c2410wdt_resume);
 
-#ifdef CONFIG_OF
-static const struct of_device_id s3c2410_wdt_match[] = {
-	{ .compatible = "samsung,s3c2410-wdt" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
-#endif
-
 static struct platform_driver s3c2410wdt_driver = {
 	.probe		= s3c2410wdt_probe,
 	.remove		= s3c2410wdt_remove,
 	.shutdown	= s3c2410wdt_shutdown,
+	.id_table	= s3c2410_wdt_ids,
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "s3c2410-wdt",
@@ -538,4 +680,3 @@ MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, "
 	      "Dimitry Andric <dimitry.andric@tomtom.com>");
 MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s3c2410-wdt");
-- 
1.7.10.4

  parent reply	other threads:[~2013-11-28  4:34 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-28  4:34 [PATCH V11 0/3] Add watchdog DT nodes and use syscon regmap interface to configure pmu registers Leela Krishna Amudala
2013-11-28  4:34 ` [PATCH V11 1/3] ARM: dts: Add pmu sysreg node to exynos5250 and exynos5420 dtsi files Leela Krishna Amudala
2013-12-02 18:50   ` Olof Johansson
2013-12-02 19:49     ` Tomasz Figa
2013-12-05 18:26       ` Doug Anderson
2013-12-05 18:30         ` Tomasz Figa
2013-12-05 18:35           ` Doug Anderson
2013-12-05 18:59             ` Tomasz Figa
2013-12-05 19:02               ` Doug Anderson
2013-11-28  4:34 ` Leela Krishna Amudala [this message]
     [not found]   ` <1385613243-3559-3-git-send-email-l.krishna-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-12-02 17:32     ` [PATCH V11 2/3] watchdog: s3c2410_wdt: use syscon regmap interface to configure pmu register Doug Anderson
2013-12-02 17:32       ` Doug Anderson
2013-12-05 18:27       ` Doug Anderson
2013-11-28  4:34 ` [PATCH V11 3/3] ARM: dts: update watchdog device nodes for Exynos5250 and Exynos5420 Leela Krishna Amudala

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1385613243-3559-3-git-send-email-l.krishna@samsung.com \
    --to=l.krishna@samsung.com \
    --cc=cpgs@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=kgene.kim@samsung.com \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=t.figa@samsung.com \
    --cc=wim@iguana.be \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.