All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH v3 1/3] DMA: shdma: Fix warnings due to improper casts and printk formats
Date: Wed, 11 Dec 2013 12:43:04 +0000	[thread overview]
Message-ID: <1386765786-1926-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)

Use the %zu and %pad printk specifiers to print size_t and dma_addr_t
variables, and cast pointers to uintptr_t instead of unsigned int where
applicable. This fixes warnings on platforms where pointers and/or
dma_addr_t have a different size than int

Cc: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: dmaengine@vger.kernel.org
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/dma/sh/shdma-base.c | 8 ++++----
 drivers/dma/sh/shdma-of.c   | 3 ++-
 drivers/dma/sh/sudmac.c     | 4 ++--
 3 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/dma/sh/shdma-base.c b/drivers/dma/sh/shdma-base.c
index 2e7b394..5367e01 100644
--- a/drivers/dma/sh/shdma-base.c
+++ b/drivers/dma/sh/shdma-base.c
@@ -227,7 +227,7 @@ bool shdma_chan_filter(struct dma_chan *chan, void *arg)
 	struct shdma_chan *schan = to_shdma_chan(chan);
 	struct shdma_dev *sdev = to_shdma_dev(schan->dma_chan.device);
 	const struct shdma_ops *ops = sdev->ops;
-	int match = (int)arg;
+	int match = (long)arg;
 	int ret;
 
 	if (match < 0)
@@ -491,8 +491,8 @@ static struct shdma_desc *shdma_add_desc(struct shdma_chan *schan,
 	}
 
 	dev_dbg(schan->dev,
-		"chaining (%u/%u)@%x -> %x with %p, cookie %d\n",
-		copy_size, *len, *src, *dst, &new->async_tx,
+		"chaining (%zu/%zu)@%pad -> %pad with %p, cookie %d\n",
+		copy_size, *len, src, dst, &new->async_tx,
 		new->async_tx.cookie);
 
 	new->mark = DESC_PREPARED;
@@ -555,7 +555,7 @@ static struct dma_async_tx_descriptor *shdma_prep_sg(struct shdma_chan *schan,
 			goto err_get_desc;
 
 		do {
-			dev_dbg(schan->dev, "Add SG #%d@%p[%d], dma %llx\n",
+			dev_dbg(schan->dev, "Add SG #%d@%p[%zu], dma %llx\n",
 				i, sg, len, (unsigned long long)sg_addr);
 
 			if (direction = DMA_DEV_TO_MEM)
diff --git a/drivers/dma/sh/shdma-of.c b/drivers/dma/sh/shdma-of.c
index 06473a0..b4ff9d3 100644
--- a/drivers/dma/sh/shdma-of.c
+++ b/drivers/dma/sh/shdma-of.c
@@ -33,7 +33,8 @@ static struct dma_chan *shdma_of_xlate(struct of_phandle_args *dma_spec,
 	/* Only slave DMA channels can be allocated via DT */
 	dma_cap_set(DMA_SLAVE, mask);
 
-	chan = dma_request_channel(mask, shdma_chan_filter, (void *)id);
+	chan = dma_request_channel(mask, shdma_chan_filter,
+				   (void *)(uintptr_t)id);
 	if (chan)
 		to_shdma_chan(chan)->hw_req = id;
 
diff --git a/drivers/dma/sh/sudmac.c b/drivers/dma/sh/sudmac.c
index c7e9cdf..4e7df43 100644
--- a/drivers/dma/sh/sudmac.c
+++ b/drivers/dma/sh/sudmac.c
@@ -178,8 +178,8 @@ static int sudmac_desc_setup(struct shdma_chan *schan,
 	struct sudmac_chan *sc = to_chan(schan);
 	struct sudmac_desc *sd = to_desc(sdesc);
 
-	dev_dbg(sc->shdma_chan.dev, "%s: src=%x, dst=%x, len=%d\n",
-		__func__, src, dst, *len);
+	dev_dbg(sc->shdma_chan.dev, "%s: src=%pad, dst=%pad, len=%zu\n",
+		__func__, &src, &dst, *len);
 
 	if (*len > schan->max_xfer_len)
 		*len = schan->max_xfer_len;
-- 
1.8.3.2


             reply	other threads:[~2013-12-11 12:43 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-11 12:43 Laurent Pinchart [this message]
2013-12-11 12:59 ` [PATCH v3 1/3] DMA: shdma: Fix warnings due to improper casts and printk formats Shevchenko, Andriy
2013-12-11 14:27 ` Laurent Pinchart
2014-01-07 15:08 ` Laurent Pinchart
2014-01-21 12:10 ` Laurent Pinchart
2014-03-04 11:42 ` Laurent Pinchart
2014-03-04 16:50 ` Koul, Vinod
2014-03-04 17:07 ` Laurent Pinchart
2014-03-06  6:20 ` Vinod Koul
2014-03-06 11:24 ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1386765786-1926-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com \
    --to=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.