All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/4] ARM: shmobile: r8a7790: Add serial ports to the device tree
Date: Wed, 11 Dec 2013 13:14:21 +0000	[thread overview]
Message-ID: <1386767664-20113-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1386767664-20113-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>

Add all serial ports marked as disabled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7790.dtsi | 100 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 8ed48de..6582f9d 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -299,6 +299,106 @@
 		status = "disabled";
 	};
 
+	scifa0: serial@e6c40000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial@e6c50000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial@e6c60000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial@e6c20000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial@e6c30000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial@e6ce0000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial@e6e60000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial@e6e68000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial@e62c0000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial@e62c8000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.3.2


WARNING: multiple messages have this Message-ID (diff)
From: laurent.pinchart+renesas@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/4] ARM: shmobile: r8a7790: Add serial ports to the device tree
Date: Wed, 11 Dec 2013 14:14:21 +0100	[thread overview]
Message-ID: <1386767664-20113-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1386767664-20113-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>

Add all serial ports marked as disabled.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7790.dtsi | 100 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 8ed48de..6582f9d 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -299,6 +299,106 @@
 		status = "disabled";
 	};
 
+	scifa0: serial at e6c40000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		reg = <0 0xe6c40000 0 64>;
+		interrupt-parent = <&gic>;
+		interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa1: serial at e6c50000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c50000 0 64>;
+		interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifa2: serial at e6c60000 {
+		compatible = "renesas,scifa-r8a7790", "renesas,scifa";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c60000 0 64>;
+		interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFA2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb0: serial at e6c20000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c20000 0 64>;
+		interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb1: serial at e6c30000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6c30000 0 64>;
+		interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scifb2: serial at e6ce0000 {
+		compatible = "renesas,scifb-r8a7790", "renesas,scifb";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6ce0000 0 64>;
+		interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp2_clks R8A7790_CLK_SCIFB2>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif0: serial at e6e60000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e60000 0 64>;
+		interrupts = <0 152 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	scif1: serial at e6e68000 {
+		compatible = "renesas,scif-r8a7790", "renesas,scif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe6e68000 0 64>;
+		interrupts = <0 153 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_SCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif0: serial at e62c0000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c0000 0 96>;
+		interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF0>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
+	hscif1: serial at e62c8000 {
+		compatible = "renesas,hscif-r8a7790", "renesas,hscif";
+		interrupt-parent = <&gic>;
+		reg = <0 0xe62c8000 0 96>;
+		interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp7_clks R8A7790_CLK_HSCIF1>;
+		clock-names = "sci_ick";
+		status = "disabled";
+	};
+
 	clocks {
 		#address-cells = <2>;
 		#size-cells = <2>;
-- 
1.8.3.2

  reply	other threads:[~2013-12-11 13:14 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-11 13:14 [PATCH v3 0/4] Lager and Koelsch reference serial port support Laurent Pinchart
2013-12-11 13:14 ` Laurent Pinchart
2013-12-11 13:14 ` Laurent Pinchart [this message]
2013-12-11 13:14   ` [PATCH v3 1/4] ARM: shmobile: r8a7790: Add serial ports to the device tree Laurent Pinchart
2013-12-11 13:14 ` [PATCH v3 2/4] ARM: shmobile: r8a7791: " Laurent Pinchart
2013-12-11 13:14   ` Laurent Pinchart
2013-12-11 13:14 ` [PATCH v3 3/4] ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT Laurent Pinchart
2013-12-11 13:14   ` Laurent Pinchart
2013-12-11 13:14 ` [PATCH v3 4/4] ARM: shmobile: koelsch: " Laurent Pinchart
2013-12-11 13:14   ` Laurent Pinchart
2014-01-07  1:39 ` [PATCH v3 0/4] Lager and Koelsch reference serial port support Simon Horman
2014-01-07  1:39   ` Simon Horman
2014-01-07  8:03   ` Laurent Pinchart
2014-01-07  8:03     ` Laurent Pinchart
2014-01-08  4:44     ` Simon Horman
2014-01-08  4:44       ` Simon Horman
2014-01-08  7:13       ` Magnus Damm
2014-01-08  7:13         ` Magnus Damm
2014-01-08  7:51       ` Laurent Pinchart
2014-01-08  7:51         ` Laurent Pinchart
2014-01-08  7:55         ` Simon Horman
2014-01-08  7:55           ` Simon Horman
2014-01-08  7:56           ` Simon Horman
2014-01-08  7:56             ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1386767664-20113-2-git-send-email-laurent.pinchart+renesas@ideasonboard.com \
    --to=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.