From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 4/4] ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DT Date: Wed, 11 Dec 2013 13:14:24 +0000 [thread overview] Message-ID: <1386767664-20113-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw) In-Reply-To: <1386767664-20113-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com> SCIF0 and SCIF1 are used as debug serial ports. Enable them and configure pinmuxing appropriately. We can now remove the clkdev registration hack for SCIF devices from the Koelsch reference board file. As a side effect of switching to DT-based serial port instantiation, ttySC6 and ttySC7 get renamed to ttySC0 and ttySC1. As the device tree source if now shared between koelsch and koelsch-reference, we need to update the serial ports in C code as well. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- arch/arm/boot/dts/r8a7791-koelsch.dts | 24 ++++++++++++++--- arch/arm/mach-shmobile/board-koelsch-reference.c | 18 ++----------- arch/arm/mach-shmobile/clock-r8a7791.c | 24 ++++++++--------- arch/arm/mach-shmobile/setup-r8a7791.c | 34 ++++++++++++------------ 4 files changed, 51 insertions(+), 49 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index fd556c3..9e96ff3 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -17,8 +17,13 @@ model = "Koelsch"; compatible = "renesas,koelsch", "renesas,r8a7791"; + aliases { + serial0 = &scif0; + serial1 = &scif1; + }; + chosen { - bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "console=ttySC0,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; memory@40000000 { @@ -50,9 +55,6 @@ }; &pfc { - pinctrl-0 = <&scif0_pins &scif1_pins>; - pinctrl-names = "default"; - scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; @@ -63,3 +65,17 @@ renesas,function = "scif1"; }; }; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index 652b592..3b6b824 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -32,24 +32,10 @@ static void __init koelsch_add_standard_devices(void) { #ifdef CONFIG_COMMON_CLK /* - * This is a really crude hack to provide clkdev support to the SCIF - * and CMT devices until they get moved to DT. + * This is a really crude hack to provide clkdev support to the CMT + * device until they get moved to DT. */ - static const char * const scif_names[] = { - "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifa2", - "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scifa3", - "scifa4", "scifa5", - }; struct clk *clk; - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(scif_names); ++i) { - clk = clk_get(NULL, scif_names[i]); - if (clk) { - clk_register_clkdev(clk, NULL, "sh-sci.%u", i); - clk_put(clk); - } - } clk = clk_get(NULL, "cmt0"); if (clk) { diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index ff2d60d..5a6f96d 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -174,18 +174,18 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7791", &mstp_clks[MSTP726]), CLKDEV_ICK_ID("du.0", "rcar-du-r8a7791", &mstp_clks[MSTP724]), CLKDEV_ICK_ID("du.1", "rcar-du-r8a7791", &mstp_clks[MSTP723]), - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */ - CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */ - CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */ - CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */ - CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */ - CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */ - CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */ + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP721]), /* SCIF0 */ + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP720]), /* SCIF1 */ + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP719]), /* SCIF2 */ + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP718]), /* SCIF3 */ + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP715]), /* SCIF4 */ + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP714]), /* SCIF5 */ + CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP204]), /* SCIFA0 */ + CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP203]), /* SCIFA1 */ + CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB0 */ + CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP207]), /* SCIFB1 */ + CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP216]), /* SCIFB2 */ + CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP202]), /* SCIFA2 */ CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */ CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */ diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index e28404e..605f4cf 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -105,18 +105,18 @@ static struct resource scif##index##_resources[] = { \ #define R8A7791_SCIFB(index, baseaddr, irq) \ __R8A7791_SCIF(PORT_SCIFB, index, baseaddr, irq) -R8A7791_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */ -R8A7791_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */ -R8A7791_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */ -R8A7791_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */ -R8A7791_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */ -R8A7791_SCIFA(5, 0xe6c60000, gic_spi(151)); /* SCIFA2 */ -R8A7791_SCIF(6, 0xe6e60000, gic_spi(152)); /* SCIF0 */ -R8A7791_SCIF(7, 0xe6e68000, gic_spi(153)); /* SCIF1 */ -R8A7791_SCIF(8, 0xe6e58000, gic_spi(22)); /* SCIF2 */ -R8A7791_SCIF(9, 0xe6ea8000, gic_spi(23)); /* SCIF3 */ -R8A7791_SCIF(10, 0xe6ee0000, gic_spi(24)); /* SCIF4 */ -R8A7791_SCIF(11, 0xe6ee8000, gic_spi(25)); /* SCIF5 */ +R8A7791_SCIF(0, 0xe6e60000, gic_spi(152)); /* SCIF0 */ +R8A7791_SCIF(1, 0xe6e68000, gic_spi(153)); /* SCIF1 */ +R8A7791_SCIF(2, 0xe6e58000, gic_spi(22)); /* SCIF2 */ +R8A7791_SCIF(3, 0xe6ea8000, gic_spi(23)); /* SCIF3 */ +R8A7791_SCIF(4, 0xe6ee0000, gic_spi(24)); /* SCIF4 */ +R8A7791_SCIF(5, 0xe6ee8000, gic_spi(25)); /* SCIF5 */ +R8A7791_SCIFA(6, 0xe6c40000, gic_spi(144)); /* SCIFA0 */ +R8A7791_SCIFA(7, 0xe6c50000, gic_spi(145)); /* SCIFA1 */ +R8A7791_SCIFB(8, 0xe6c20000, gic_spi(148)); /* SCIFB0 */ +R8A7791_SCIFB(9, 0xe6c30000, gic_spi(149)); /* SCIFB1 */ +R8A7791_SCIFB(10, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */ +R8A7791_SCIFA(11, 0xe6c60000, gic_spi(151)); /* SCIFA2 */ R8A7791_SCIFA(12, 0xe6c70000, gic_spi(29)); /* SCIFA3 */ R8A7791_SCIFA(13, 0xe6c78000, gic_spi(30)); /* SCIFA4 */ R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */ @@ -185,6 +185,11 @@ static const struct resource thermal_resources[] __initconst = { void __init r8a7791_add_dt_devices(void) { + r8a7791_register_cmt(00); +} + +void __init r8a7791_add_standard_devices(void) +{ r8a7791_register_scif(0); r8a7791_register_scif(1); r8a7791_register_scif(2); @@ -200,11 +205,6 @@ void __init r8a7791_add_dt_devices(void) r8a7791_register_scif(12); r8a7791_register_scif(13); r8a7791_register_scif(14); - r8a7791_register_cmt(00); -} - -void __init r8a7791_add_standard_devices(void) -{ r8a7791_add_dt_devices(); r8a7791_register_irqc(0); r8a7791_register_thermal(); -- 1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: laurent.pinchart+renesas@ideasonboard.com (Laurent Pinchart) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 4/4] ARM: shmobile: koelsch: Enable SCIF0 and SCIF1 serial ports in DT Date: Wed, 11 Dec 2013 14:14:24 +0100 [thread overview] Message-ID: <1386767664-20113-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw) In-Reply-To: <1386767664-20113-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com> SCIF0 and SCIF1 are used as debug serial ports. Enable them and configure pinmuxing appropriately. We can now remove the clkdev registration hack for SCIF devices from the Koelsch reference board file. As a side effect of switching to DT-based serial port instantiation, ttySC6 and ttySC7 get renamed to ttySC0 and ttySC1. As the device tree source if now shared between koelsch and koelsch-reference, we need to update the serial ports in C code as well. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> --- arch/arm/boot/dts/r8a7791-koelsch.dts | 24 ++++++++++++++--- arch/arm/mach-shmobile/board-koelsch-reference.c | 18 ++----------- arch/arm/mach-shmobile/clock-r8a7791.c | 24 ++++++++--------- arch/arm/mach-shmobile/setup-r8a7791.c | 34 ++++++++++++------------ 4 files changed, 51 insertions(+), 49 deletions(-) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index fd556c3..9e96ff3 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -17,8 +17,13 @@ model = "Koelsch"; compatible = "renesas,koelsch", "renesas,r8a7791"; + aliases { + serial0 = &scif0; + serial1 = &scif1; + }; + chosen { - bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + bootargs = "console=ttySC0,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; }; memory at 40000000 { @@ -50,9 +55,6 @@ }; &pfc { - pinctrl-0 = <&scif0_pins &scif1_pins>; - pinctrl-names = "default"; - scif0_pins: serial0 { renesas,groups = "scif0_data_d"; renesas,function = "scif0"; @@ -63,3 +65,17 @@ renesas,function = "scif1"; }; }; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/mach-shmobile/board-koelsch-reference.c b/arch/arm/mach-shmobile/board-koelsch-reference.c index 652b592..3b6b824 100644 --- a/arch/arm/mach-shmobile/board-koelsch-reference.c +++ b/arch/arm/mach-shmobile/board-koelsch-reference.c @@ -32,24 +32,10 @@ static void __init koelsch_add_standard_devices(void) { #ifdef CONFIG_COMMON_CLK /* - * This is a really crude hack to provide clkdev support to the SCIF - * and CMT devices until they get moved to DT. + * This is a really crude hack to provide clkdev support to the CMT + * device until they get moved to DT. */ - static const char * const scif_names[] = { - "scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifa2", - "scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scifa3", - "scifa4", "scifa5", - }; struct clk *clk; - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(scif_names); ++i) { - clk = clk_get(NULL, scif_names[i]); - if (clk) { - clk_register_clkdev(clk, NULL, "sh-sci.%u", i); - clk_put(clk); - } - } clk = clk_get(NULL, "cmt0"); if (clk) { diff --git a/arch/arm/mach-shmobile/clock-r8a7791.c b/arch/arm/mach-shmobile/clock-r8a7791.c index ff2d60d..5a6f96d 100644 --- a/arch/arm/mach-shmobile/clock-r8a7791.c +++ b/arch/arm/mach-shmobile/clock-r8a7791.c @@ -174,18 +174,18 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7791", &mstp_clks[MSTP726]), CLKDEV_ICK_ID("du.0", "rcar-du-r8a7791", &mstp_clks[MSTP724]), CLKDEV_ICK_ID("du.1", "rcar-du-r8a7791", &mstp_clks[MSTP723]), - CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ - CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ - CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */ - CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */ - CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */ - CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */ - CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */ - CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */ - CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */ - CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */ - CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */ - CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */ + CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP721]), /* SCIF0 */ + CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP720]), /* SCIF1 */ + CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP719]), /* SCIF2 */ + CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP718]), /* SCIF3 */ + CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP715]), /* SCIF4 */ + CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP714]), /* SCIF5 */ + CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP204]), /* SCIFA0 */ + CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP203]), /* SCIFA1 */ + CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB0 */ + CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP207]), /* SCIFB1 */ + CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP216]), /* SCIFB2 */ + CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP202]), /* SCIFA2 */ CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1105]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1106]), /* SCIFA4 */ CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1107]), /* SCIFA5 */ diff --git a/arch/arm/mach-shmobile/setup-r8a7791.c b/arch/arm/mach-shmobile/setup-r8a7791.c index e28404e..605f4cf 100644 --- a/arch/arm/mach-shmobile/setup-r8a7791.c +++ b/arch/arm/mach-shmobile/setup-r8a7791.c @@ -105,18 +105,18 @@ static struct resource scif##index##_resources[] = { \ #define R8A7791_SCIFB(index, baseaddr, irq) \ __R8A7791_SCIF(PORT_SCIFB, index, baseaddr, irq) -R8A7791_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */ -R8A7791_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */ -R8A7791_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */ -R8A7791_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */ -R8A7791_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */ -R8A7791_SCIFA(5, 0xe6c60000, gic_spi(151)); /* SCIFA2 */ -R8A7791_SCIF(6, 0xe6e60000, gic_spi(152)); /* SCIF0 */ -R8A7791_SCIF(7, 0xe6e68000, gic_spi(153)); /* SCIF1 */ -R8A7791_SCIF(8, 0xe6e58000, gic_spi(22)); /* SCIF2 */ -R8A7791_SCIF(9, 0xe6ea8000, gic_spi(23)); /* SCIF3 */ -R8A7791_SCIF(10, 0xe6ee0000, gic_spi(24)); /* SCIF4 */ -R8A7791_SCIF(11, 0xe6ee8000, gic_spi(25)); /* SCIF5 */ +R8A7791_SCIF(0, 0xe6e60000, gic_spi(152)); /* SCIF0 */ +R8A7791_SCIF(1, 0xe6e68000, gic_spi(153)); /* SCIF1 */ +R8A7791_SCIF(2, 0xe6e58000, gic_spi(22)); /* SCIF2 */ +R8A7791_SCIF(3, 0xe6ea8000, gic_spi(23)); /* SCIF3 */ +R8A7791_SCIF(4, 0xe6ee0000, gic_spi(24)); /* SCIF4 */ +R8A7791_SCIF(5, 0xe6ee8000, gic_spi(25)); /* SCIF5 */ +R8A7791_SCIFA(6, 0xe6c40000, gic_spi(144)); /* SCIFA0 */ +R8A7791_SCIFA(7, 0xe6c50000, gic_spi(145)); /* SCIFA1 */ +R8A7791_SCIFB(8, 0xe6c20000, gic_spi(148)); /* SCIFB0 */ +R8A7791_SCIFB(9, 0xe6c30000, gic_spi(149)); /* SCIFB1 */ +R8A7791_SCIFB(10, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */ +R8A7791_SCIFA(11, 0xe6c60000, gic_spi(151)); /* SCIFA2 */ R8A7791_SCIFA(12, 0xe6c70000, gic_spi(29)); /* SCIFA3 */ R8A7791_SCIFA(13, 0xe6c78000, gic_spi(30)); /* SCIFA4 */ R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */ @@ -185,6 +185,11 @@ static const struct resource thermal_resources[] __initconst = { void __init r8a7791_add_dt_devices(void) { + r8a7791_register_cmt(00); +} + +void __init r8a7791_add_standard_devices(void) +{ r8a7791_register_scif(0); r8a7791_register_scif(1); r8a7791_register_scif(2); @@ -200,11 +205,6 @@ void __init r8a7791_add_dt_devices(void) r8a7791_register_scif(12); r8a7791_register_scif(13); r8a7791_register_scif(14); - r8a7791_register_cmt(00); -} - -void __init r8a7791_add_standard_devices(void) -{ r8a7791_add_dt_devices(); r8a7791_register_irqc(0); r8a7791_register_thermal(); -- 1.8.3.2
next prev parent reply other threads:[~2013-12-11 13:14 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-12-11 13:14 [PATCH v3 0/4] Lager and Koelsch reference serial port support Laurent Pinchart 2013-12-11 13:14 ` Laurent Pinchart 2013-12-11 13:14 ` [PATCH v3 1/4] ARM: shmobile: r8a7790: Add serial ports to the device tree Laurent Pinchart 2013-12-11 13:14 ` Laurent Pinchart 2013-12-11 13:14 ` [PATCH v3 2/4] ARM: shmobile: r8a7791: " Laurent Pinchart 2013-12-11 13:14 ` Laurent Pinchart 2013-12-11 13:14 ` [PATCH v3 3/4] ARM: shmobile: lager: Enable SCIF0 and SCIF1 serial ports in DT Laurent Pinchart 2013-12-11 13:14 ` Laurent Pinchart 2013-12-11 13:14 ` Laurent Pinchart [this message] 2013-12-11 13:14 ` [PATCH v3 4/4] ARM: shmobile: koelsch: " Laurent Pinchart 2014-01-07 1:39 ` [PATCH v3 0/4] Lager and Koelsch reference serial port support Simon Horman 2014-01-07 1:39 ` Simon Horman 2014-01-07 8:03 ` Laurent Pinchart 2014-01-07 8:03 ` Laurent Pinchart 2014-01-08 4:44 ` Simon Horman 2014-01-08 4:44 ` Simon Horman 2014-01-08 7:13 ` Magnus Damm 2014-01-08 7:13 ` Magnus Damm 2014-01-08 7:51 ` Laurent Pinchart 2014-01-08 7:51 ` Laurent Pinchart 2014-01-08 7:55 ` Simon Horman 2014-01-08 7:55 ` Simon Horman 2014-01-08 7:56 ` Simon Horman 2014-01-08 7:56 ` Simon Horman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1386767664-20113-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com \ --to=laurent.pinchart+renesas@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.