All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 4/5] ARM: shmobile: r8a7790: Reference clocks
Date: Wed, 11 Dec 2013 14:05:15 +0000	[thread overview]
Message-ID: <1386770716-21610-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1386770716-21610-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>

Reference clocks using a "clocks" property in all nodes corresponding to
devices that require a clock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index d14c855..8ed48de 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -197,6 +197,7 @@
 		reg = <0 0xe6508000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C0>;
 		status = "disabled";
 	};
 
@@ -207,6 +208,7 @@
 		reg = <0 0xe6518000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C1>;
 		status = "disabled";
 	};
 
@@ -217,6 +219,7 @@
 		reg = <0 0xe6530000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C2>;
 		status = "disabled";
 	};
 
@@ -227,6 +230,7 @@
 		reg = <0 0xe6540000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C3>;
 		status = "disabled";
 	};
 
@@ -235,6 +239,7 @@
 		reg = <0 0xee200000 0 0x80>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
@@ -244,6 +249,7 @@
 		reg = <0 0xee220000 0 0x80>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
@@ -258,6 +264,7 @@
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -267,6 +274,7 @@
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -276,6 +284,7 @@
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -285,6 +294,7 @@
 		reg = <0 0xee160000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
-- 
1.8.3.2


WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: linux-sh@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	Mike Turquette <mturquette@linaro.org>
Subject: [PATCH v4 4/5] ARM: shmobile: r8a7790: Reference clocks
Date: Wed, 11 Dec 2013 15:05:15 +0100	[thread overview]
Message-ID: <1386770716-21610-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1386770716-21610-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>

Reference clocks using a "clocks" property in all nodes corresponding to
devices that require a clock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index d14c855..8ed48de 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -197,6 +197,7 @@
 		reg = <0 0xe6508000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C0>;
 		status = "disabled";
 	};
 
@@ -207,6 +208,7 @@
 		reg = <0 0xe6518000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C1>;
 		status = "disabled";
 	};
 
@@ -217,6 +219,7 @@
 		reg = <0 0xe6530000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C2>;
 		status = "disabled";
 	};
 
@@ -227,6 +230,7 @@
 		reg = <0 0xe6540000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C3>;
 		status = "disabled";
 	};
 
@@ -235,6 +239,7 @@
 		reg = <0 0xee200000 0 0x80>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
@@ -244,6 +249,7 @@
 		reg = <0 0xee220000 0 0x80>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
@@ -258,6 +264,7 @@
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -267,6 +274,7 @@
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -276,6 +284,7 @@
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -285,6 +294,7 @@
 		reg = <0 0xee160000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
-- 
1.8.3.2


WARNING: multiple messages have this Message-ID (diff)
From: laurent.pinchart+renesas@ideasonboard.com (Laurent Pinchart)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 4/5] ARM: shmobile: r8a7790: Reference clocks
Date: Wed, 11 Dec 2013 15:05:15 +0100	[thread overview]
Message-ID: <1386770716-21610-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1386770716-21610-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>

Reference clocks using a "clocks" property in all nodes corresponding to
devices that require a clock.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index d14c855..8ed48de 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -197,6 +197,7 @@
 		reg = <0 0xe6508000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C0>;
 		status = "disabled";
 	};
 
@@ -207,6 +208,7 @@
 		reg = <0 0xe6518000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C1>;
 		status = "disabled";
 	};
 
@@ -217,6 +219,7 @@
 		reg = <0 0xe6530000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C2>;
 		status = "disabled";
 	};
 
@@ -227,6 +230,7 @@
 		reg = <0 0xe6540000 0 0x40>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_I2C3>;
 		status = "disabled";
 	};
 
@@ -235,6 +239,7 @@
 		reg = <0 0xee200000 0 0x80>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
@@ -244,6 +249,7 @@
 		reg = <0 0xee220000 0 0x80>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
 		reg-io-width = <4>;
 		status = "disabled";
 	};
@@ -258,6 +264,7 @@
 		reg = <0 0xee100000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -267,6 +274,7 @@
 		reg = <0 0xee120000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -276,6 +284,7 @@
 		reg = <0 0xee140000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
@@ -285,6 +294,7 @@
 		reg = <0 0xee160000 0 0x100>;
 		interrupt-parent = <&gic>;
 		interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
 		cap-sd-highspeed;
 		status = "disabled";
 	};
-- 
1.8.3.2

  parent reply	other threads:[~2013-12-11 14:05 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-11 14:05 [PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support Laurent Pinchart
2013-12-11 14:05 ` Laurent Pinchart
2013-12-11 14:05 ` Laurent Pinchart
2013-12-11 14:05 ` [PATCH v4 1/5] ARM: shmobile: r8a7790: Add clock index macros for DT sources Laurent Pinchart
2013-12-11 14:05   ` Laurent Pinchart
2013-12-11 14:05   ` Laurent Pinchart
2013-12-11 14:05 ` [PATCH v4 2/5] ARM: shmobile: r8a7791: " Laurent Pinchart
2013-12-11 14:05   ` Laurent Pinchart
2013-12-11 14:05   ` Laurent Pinchart
2013-12-11 14:05 ` [PATCH v4 3/5] ARM: shmobile: r8a7790: Add clocks Laurent Pinchart
2013-12-11 14:05   ` Laurent Pinchart
2013-12-11 14:05   ` Laurent Pinchart
2013-12-11 14:05 ` Laurent Pinchart [this message]
2013-12-11 14:05   ` [PATCH v4 4/5] ARM: shmobile: r8a7790: Reference clocks Laurent Pinchart
2013-12-11 14:05   ` Laurent Pinchart
2013-12-11 14:05 ` [PATCH v4 5/5] ARM: shmobile: r8a7791: Add clocks Laurent Pinchart
2013-12-11 14:05   ` Laurent Pinchart
2013-12-11 14:05   ` Laurent Pinchart
2013-12-14  1:26 ` [PATCH v4 0/5] Renesas R-Car Gen2 Common Clock Framework arch/ support Simon Horman
2013-12-14  1:26   ` Simon Horman
2013-12-14  1:26   ` Simon Horman
2013-12-14  1:41   ` Laurent Pinchart
2013-12-14  1:41     ` Laurent Pinchart
2013-12-14  1:41     ` Laurent Pinchart
2013-12-14  2:11     ` Simon Horman
2013-12-14  2:11       ` Simon Horman
2013-12-14  2:11       ` Simon Horman
2013-12-14  2:19       ` Simon Horman
2013-12-14  2:19         ` Simon Horman
2013-12-14  2:19         ` Simon Horman
2013-12-14  2:27         ` Laurent Pinchart
2013-12-14  2:27           ` Laurent Pinchart
2013-12-14  2:27           ` Laurent Pinchart
2013-12-14  3:50           ` Simon Horman
2013-12-14  3:50             ` Simon Horman
2013-12-14  3:50             ` Simon Horman
2013-12-19  7:10             ` Simon Horman
2013-12-19  7:10               ` Simon Horman
2013-12-19  7:10               ` Simon Horman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1386770716-21610-5-git-send-email-laurent.pinchart+renesas@ideasonboard.com \
    --to=laurent.pinchart+renesas@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.