From: Matt Porter <mporter@linaro.org> To: Felipe Balbi <balbi@ti.com>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Kishon Vijay Abraham I <kishon@ti.com>, Rob Herring <rob.herring@calxeda.com>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Kumar Gala <galak@codeaurora.org>, Ian Campbell <ijc+devicetree@hellion.org.uk>, Christian Daudt <bcm@fixthebug.org>, Paul Zimmerman <paulz@synopsys.com> Cc: Tomasz Figa <t.figa@samsung.com>, Kamil Debski <k.debski@samsung.com>, Kyungmin Park <kyungmin.park@samsung.com>, Linux USB List <linux-usb@vger.kernel.org>, Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org>, Devicetree List <devicetree@vger.kernel.org>, Linaro Patches <patches@linaro.org> Subject: [PATCH v4 9/9] ARM: dts: add usb udc support to bcm281xx Date: Thu, 12 Dec 2013 06:18:37 -0500 [thread overview] Message-ID: <1386847117-21240-10-git-send-email-mporter@linaro.org> (raw) In-Reply-To: <1386847117-21240-1-git-send-email-mporter@linaro.org> Adds USB OTG/PHY and clock support to BCM281xx and enables UDC support on the bcm11351-brt and bcm28155-ap boards. Signed-off-by: Matt Porter <mporter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> --- arch/arm/boot/dts/bcm11351-brt.dts | 6 ++++++ arch/arm/boot/dts/bcm11351.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++++++ 3 files changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts index 23cd16d..396b704 100644 --- a/arch/arm/boot/dts/bcm11351-brt.dts +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -44,5 +44,11 @@ status = "okay"; }; + usbotg: usb@3f120000 { + status = "okay"; + }; + usbphy: usb-phy@3f130000 { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 1246885..0fbb455 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -243,4 +243,22 @@ #clock-cells = <0>; }; }; + + usbotg: usb@3f120000 { + compatible = "snps,dwc2"; + reg = <0x3f120000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usb-phy@3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index 08e47c2..a3bc436 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -43,4 +43,12 @@ cd-gpios = <&gpio 14 0>; status = "okay"; }; + + usbotg: usb@3f120000 { + status = "okay"; + }; + + usbphy: usb-phy@3f130000 { + status = "okay"; + }; }; -- 1.8.4
WARNING: multiple messages have this Message-ID (diff)
From: mporter@linaro.org (Matt Porter) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 9/9] ARM: dts: add usb udc support to bcm281xx Date: Thu, 12 Dec 2013 06:18:37 -0500 [thread overview] Message-ID: <1386847117-21240-10-git-send-email-mporter@linaro.org> (raw) In-Reply-To: <1386847117-21240-1-git-send-email-mporter@linaro.org> Adds USB OTG/PHY and clock support to BCM281xx and enables UDC support on the bcm11351-brt and bcm28155-ap boards. Signed-off-by: Matt Porter <mporter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> --- arch/arm/boot/dts/bcm11351-brt.dts | 6 ++++++ arch/arm/boot/dts/bcm11351.dtsi | 18 ++++++++++++++++++ arch/arm/boot/dts/bcm28155-ap.dts | 8 ++++++++ 3 files changed, 32 insertions(+) diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts index 23cd16d..396b704 100644 --- a/arch/arm/boot/dts/bcm11351-brt.dts +++ b/arch/arm/boot/dts/bcm11351-brt.dts @@ -44,5 +44,11 @@ status = "okay"; }; + usbotg: usb at 3f120000 { + status = "okay"; + }; + usbphy: usb-phy at 3f130000 { + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 1246885..0fbb455 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -243,4 +243,22 @@ #clock-cells = <0>; }; }; + + usbotg: usb at 3f120000 { + compatible = "snps,dwc2"; + reg = <0x3f120000 0x10000>; + interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; + status = "disabled"; + }; + + usbphy: usb-phy at 3f130000 { + compatible = "brcm,kona-usb2-phy"; + reg = <0x3f130000 0x28>; + #phy-cells = <0>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts index 08e47c2..a3bc436 100644 --- a/arch/arm/boot/dts/bcm28155-ap.dts +++ b/arch/arm/boot/dts/bcm28155-ap.dts @@ -43,4 +43,12 @@ cd-gpios = <&gpio 14 0>; status = "okay"; }; + + usbotg: usb at 3f120000 { + status = "okay"; + }; + + usbphy: usb-phy at 3f130000 { + status = "okay"; + }; }; -- 1.8.4
next prev parent reply other threads:[~2013-12-12 11:19 UTC|newest] Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top 2013-12-12 11:18 [PATCH v4 0/9] USB Device Controller support for BCM281xx Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:18 ` [PATCH v4 1/9] phy: add phy_get_bus_width()/phy_set_bus_width() calls Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:27 ` Russell King - ARM Linux 2013-12-12 11:27 ` Russell King - ARM Linux 2013-12-12 11:27 ` Russell King - ARM Linux 2013-12-12 11:50 ` Matt Porter 2013-12-12 11:50 ` Matt Porter 2013-12-12 11:50 ` Matt Porter 2013-12-12 11:18 ` [PATCH v4 2/9] staging: dwc2: update DT binding to add generic clock/phy properties Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:18 ` [PATCH v4 3/9] usb: gadget: s3c-hsotg: enable build for other platforms Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:18 ` [PATCH v4 4/9] usb: gadget: s3c-hsotg: add snps,dwc2 compatible string Matt Porter 2013-12-12 11:18 ` [PATCH v4 4/9] usb: gadget: s3c-hsotg: add snps, dwc2 " Matt Porter 2013-12-12 11:18 ` [PATCH v4 5/9] usb: gadget: s3c-hsotg: use generic phy_init()/phy_exit() support Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:18 ` [PATCH v4 6/9] usb: gadget: s3c-hsotg: get phy bus width from phy subsystem Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:18 ` [PATCH v4 7/9] phy: add Broadcom Kona USB2 PHY DT binding Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:18 ` [PATCH v4 8/9] phy: add Broadcom Kona USB2 PHY driver Matt Porter 2013-12-12 11:18 ` Matt Porter 2013-12-12 11:18 ` Matt Porter [this message] 2013-12-12 11:18 ` [PATCH v4 9/9] ARM: dts: add usb udc support to bcm281xx Matt Porter
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1386847117-21240-10-git-send-email-mporter@linaro.org \ --to=mporter@linaro.org \ --cc=balbi@ti.com \ --cc=bcm@fixthebug.org \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=gregkh@linuxfoundation.org \ --cc=ijc+devicetree@hellion.org.uk \ --cc=k.debski@samsung.com \ --cc=kishon@ti.com \ --cc=kyungmin.park@samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=patches@linaro.org \ --cc=paulz@synopsys.com \ --cc=pawel.moll@arm.com \ --cc=rob.herring@calxeda.com \ --cc=t.figa@samsung.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.