From: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> To: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> Cc: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Subject: [PATCH] ARM: tegra: Remove 3.3V supply and modem regulators Date: Mon, 6 Jan 2014 16:25:33 +0100 [thread overview] Message-ID: <1389021933-6675-1-git-send-email-treding@nvidia.com> (raw) GPIO 1 and 2 of the PMIC are not used for the described purpose, so remove them. Signed-off-by: Thierry Reding <treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> --- Note: Removing these makes the work-in-progress eDP support work again. --- arch/arm/boot/dts/tegra124-venice2.dts | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index c6dcef513e5d..4b3f3658e7ff 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -980,28 +980,6 @@ regulator-always-on; }; - vdd_3v3_reg: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vdd_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; - }; - - vdd_3v3_modem_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "vdd-modem-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&as3722 2 GPIO_ACTIVE_HIGH>; - }; - vdd_hdmi_5v0_reg: regulator@3 { compatible = "regulator-fixed"; reg = <3>; -- 1.8.4.2
WARNING: multiple messages have this Message-ID (diff)
From: thierry.reding@gmail.com (Thierry Reding) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: tegra: Remove 3.3V supply and modem regulators Date: Mon, 6 Jan 2014 16:25:33 +0100 [thread overview] Message-ID: <1389021933-6675-1-git-send-email-treding@nvidia.com> (raw) GPIO 1 and 2 of the PMIC are not used for the described purpose, so remove them. Signed-off-by: Thierry Reding <treding@nvidia.com> --- Note: Removing these makes the work-in-progress eDP support work again. --- arch/arm/boot/dts/tegra124-venice2.dts | 22 ---------------------- 1 file changed, 22 deletions(-) diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index c6dcef513e5d..4b3f3658e7ff 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -980,28 +980,6 @@ regulator-always-on; }; - vdd_3v3_reg: regulator at 1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "vdd_3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - enable-active-high; - gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; - }; - - vdd_3v3_modem_reg: regulator at 2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "vdd-modem-3v3"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - enable-active-high; - gpio = <&as3722 2 GPIO_ACTIVE_HIGH>; - }; - vdd_hdmi_5v0_reg: regulator at 3 { compatible = "regulator-fixed"; reg = <3>; -- 1.8.4.2
next reply other threads:[~2014-01-06 15:25 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-01-06 15:25 Thierry Reding [this message] 2014-01-06 15:25 ` [PATCH] ARM: tegra: Remove 3.3V supply and modem regulators Thierry Reding [not found] ` <1389021933-6675-1-git-send-email-treding-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2014-01-06 20:59 ` Stephen Warren 2014-01-06 20:59 ` Stephen Warren [not found] ` <52CB192F.2020700-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> 2014-01-07 12:14 ` Laxman Dewangan 2014-01-07 12:14 ` Laxman Dewangan [not found] ` <52CBEF89.6090901-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2014-01-07 16:43 ` Stephen Warren 2014-01-07 16:43 ` Stephen Warren [not found] ` <52CC2EBF.60106-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> 2014-01-08 13:04 ` Laxman Dewangan 2014-01-08 13:04 ` Laxman Dewangan 2014-01-08 13:41 ` Thierry Reding 2014-01-08 13:41 ` Thierry Reding
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1389021933-6675-1-git-send-email-treding@nvidia.com \ --to=thierry.reding-re5jqeeqqe8avxtiumwx3w@public.gmane.org \ --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \ --cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.