[PATCH v2 13/16] ARM: dts: sun7i: cubietruck: Enable the GMAC

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Chen-Yu Tsai <wens@csie.org>
To: Srinivas Kandagatla <srinivas.kandagatla@st.com>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>,
	netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-sunxi@googlegroups.com, linux-kernel@vger.kernel.org,
	Rob Herring <rob.herring@calxeda.com>,
	Emilio Lopez <emilio@elopez.com.ar>,
	Mike Turquette <mturquette@linaro.org>
Subject: [PATCH v2 13/16] ARM: dts: sun7i: cubietruck: Enable the GMAC
Date: Fri, 10 Jan 2014 15:00:14 +0800	[thread overview]
Message-ID: <1389337217-29032-14-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1389337217-29032-1-git-send-email-wens@csie.org>

The CubieTruck uses the GMAC with an RGMII phy.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f9dcb61..025ce52 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -51,6 +51,18 @@
 			pinctrl-0 = <&i2c2_pins_a>;
 			status = "okay";
 		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
 	};
 
 	leds {
-- 
1.8.5.2

WARNING: multiple messages have this Message-ID (diff)

From: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
To: Srinivas Kandagatla
	<srinivas.kandagatla-qxv4g6HH51o@public.gmane.org>,
	Giuseppe Cavallaro <peppe.cavallaro-qxv4g6HH51o@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
	Emilio Lopez <emilio-0Z03zUJReD5OxF6Tv1QG9Q@public.gmane.org>,
	Mike Turquette
	<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH v2 13/16] ARM: dts: sun7i: cubietruck: Enable the GMAC
Date: Fri, 10 Jan 2014 15:00:14 +0800	[thread overview]
Message-ID: <1389337217-29032-14-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1389337217-29032-1-git-send-email-wens-jdAy2FN1RRM@public.gmane.org>

The CubieTruck uses the GMAC with an RGMII phy.

Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>
---
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f9dcb61..025ce52 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -51,6 +51,18 @@
 			pinctrl-0 = <&i2c2_pins_a>;
 			status = "okay";
 		};
+
+		gmac: ethernet@01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			status = "okay";
+
+			phy1: ethernet-phy@1 {
+				reg = <1>;
+			};
+		};
 	};
 
 	leds {
-- 
1.8.5.2

WARNING: multiple messages have this Message-ID (diff)

From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 13/16] ARM: dts: sun7i: cubietruck: Enable the GMAC
Date: Fri, 10 Jan 2014 15:00:14 +0800	[thread overview]
Message-ID: <1389337217-29032-14-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1389337217-29032-1-git-send-email-wens@csie.org>

The CubieTruck uses the GMAC with an RGMII phy.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
index f9dcb61..025ce52 100644
--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
+++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts
@@ -51,6 +51,18 @@
 			pinctrl-0 = <&i2c2_pins_a>;
 			status = "okay";
 		};
+
+		gmac: ethernet at 01c50000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&gmac_pins_rgmii_a>;
+			phy = <&phy1>;
+			phy-mode = "rgmii";
+			status = "okay";
+
+			phy1: ethernet-phy at 1 {
+				reg = <1>;
+			};
+		};
 	};
 
 	leds {
-- 
1.8.5.2

next prev parent reply	other threads:[~2014-01-10  7:02 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-10  7:00 [PATCH v2 00/16] net: stmmac: Add Allwinner A20 GMAC ethernet controller glue layer Chen-Yu Tsai
2014-01-10  7:00 ` Chen-Yu Tsai
2014-01-10  7:00 ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 01/16] reset: add non CONFIG_RESET_CONTROLLER routines Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10 13:30   ` Philipp Zabel
2014-01-10 13:30     ` Philipp Zabel
2014-01-17  3:46     ` Chen-Yu Tsai
2014-01-17  3:46       ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 02/16] net: stmmac: Enable stmmac main clock when probing hardware Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 03/16] net: stmmac: Add support for optional reset control Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 04/16] net: stmmac: Allocate and pass soc/board specific data to callbacks Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 05/16] blackfin: Update stmmac callback signatures Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10 20:47   ` Sergei Shtylyov
2014-01-10 20:47     ` Sergei Shtylyov
2014-01-10 20:47     ` Sergei Shtylyov
2014-01-10  7:00 ` [PATCH v2 06/16] net: stmmac: Honor DT parameter to force DMA store and forward mode Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 07/16] net: stmmac: Use driver data and callbacks tied with compatible strings Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 08/16] net: stmmac: sunxi platform extensions for GMAC in Allwinner A20 SoC's Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 09/16] clk: sunxi: Add Allwinner A20/A31 GMAC clock unit Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 10/16] ARM: dts: sun7i: Add GMAC clock node to sun7i DTSI Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 11/16] ARM: dts: sun7i: Add GMAC controller " Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 12/16] ARM: dts: sun7i: Add pin muxing options for the GMAC Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` Chen-Yu Tsai [this message]
2014-01-10  7:00   ` [PATCH v2 13/16] ARM: dts: sun7i: cubietruck: Enable " Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 14/16] ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMAC Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 15/16] ARM: dts: sun7i: olinuxino-micro: " Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00 ` [PATCH v2 16/16] ARM: dts: sun7i: Add ethernet alias for GMAC Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai
2014-01-10  7:00   ` Chen-Yu Tsai

find likely ancestor, descendant, or conflicting patches for this message:
dfblob:f9dcb61 dfblob:f9dcb61 dfblob:f9dcb61 dfblob:025ce52
dfblob:025ce52 dfblob:025ce52
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389337217-29032-14-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=emilio@elopez.com.ar \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sunxi@googlegroups.com \
    --cc=maxime.ripard@free-electrons.com \
    --cc=mturquette@linaro.org \
    --cc=netdev@vger.kernel.org \
    --cc=peppe.cavallaro@st.com \
    --cc=rob.herring@calxeda.com \
    --cc=srinivas.kandagatla@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.