From: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Zhiwu Song <Zhiwu.Song-kQvG35nSl+M@public.gmane.org>,
Barry Song <Baohua.Song-kQvG35nSl+M@public.gmane.org>,
Qipan Li <Qipan.Li-kQvG35nSl+M@public.gmane.org>,
linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] spi: sirf: Avoid duplicate code in various bits_per_word cases
Date: Wed, 15 Jan 2014 15:57:16 +0800 [thread overview]
Message-ID: <1389772636.13585.1.camel@phoenix> (raw)
Trivial cleanup to avoid duplicate code in various bits_per_word cases.
Signed-off-by: Axel Lin <axel.lin-8E1dMatC8ynQT0dZR+AlfA@public.gmane.org>
---
drivers/spi/spi-sirf.c | 21 ++++++---------------
1 file changed, 6 insertions(+), 15 deletions(-)
diff --git a/drivers/spi/spi-sirf.c b/drivers/spi/spi-sirf.c
index ed5e501..787683d 100644
--- a/drivers/spi/spi-sirf.c
+++ b/drivers/spi/spi-sirf.c
@@ -459,11 +459,6 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
regval |= SIRFSOC_SPI_TRAN_DAT_FORMAT_8;
sspi->rx_word = spi_sirfsoc_rx_word_u8;
sspi->tx_word = spi_sirfsoc_tx_word_u8;
- txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
- SIRFSOC_SPI_FIFO_WIDTH_BYTE;
- rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
- SIRFSOC_SPI_FIFO_WIDTH_BYTE;
- sspi->word_width = 1;
break;
case 12:
case 16:
@@ -471,26 +466,22 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
SIRFSOC_SPI_TRAN_DAT_FORMAT_16;
sspi->rx_word = spi_sirfsoc_rx_word_u16;
sspi->tx_word = spi_sirfsoc_tx_word_u16;
- txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
- SIRFSOC_SPI_FIFO_WIDTH_WORD;
- rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
- SIRFSOC_SPI_FIFO_WIDTH_WORD;
- sspi->word_width = 2;
break;
case 32:
regval |= SIRFSOC_SPI_TRAN_DAT_FORMAT_32;
sspi->rx_word = spi_sirfsoc_rx_word_u32;
sspi->tx_word = spi_sirfsoc_tx_word_u32;
- txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
- SIRFSOC_SPI_FIFO_WIDTH_DWORD;
- rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
- SIRFSOC_SPI_FIFO_WIDTH_DWORD;
- sspi->word_width = 4;
break;
default:
BUG();
}
+ txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
+ SIRFSOC_SPI_FIFO_WIDTH_WORD;
+ rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
+ SIRFSOC_SPI_FIFO_WIDTH_WORD;
+ sspi->word_width = DIV_ROUND_UP(bits_per_word, 8);
+
if (!(spi->mode & SPI_CS_HIGH))
regval |= SIRFSOC_SPI_CS_IDLE_STAT;
if (!(spi->mode & SPI_LSB_FIRST))
--
1.8.1.2
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2014-01-15 7:57 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-15 7:57 Axel Lin [this message]
[not found] ` <5EB3BFCD089AD643B9BB63439F5FD5E9012BC102FB@SHAASIEXM01.ASIA.ROOT.PRI>
[not found] ` <5EB3BFCD089AD643B9BB63439F5FD5E9012BC102FB-W2enlP78h2wYZnBWG7VmBdnKn0HB1kRyVQQcQy+6Uvc@public.gmane.org>
2014-01-15 8:30 ` FW: [PATCH] spi: sirf: Avoid duplicate code in various bits_per_word cases Barry Song
[not found] ` <CAGsJ_4xu2g3K7D-QumwJBCxTvwc06GLE_Mz8uLyAKpHOLgq2Sw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-01-15 8:35 ` Axel Lin
[not found] ` <CAFRkauB7DrFy-v0+14PcKjan4YxFiTzC5OruiaHC7mFdDmOXoA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-01-15 8:42 ` Barry Song
2014-01-15 8:46 ` Axel Lin
[not found] ` <CAFRkauCK3JJcmSx_1xi_EteY48o7vaatjBTp0L5xF-bRS+JF6A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-01-15 8:48 ` Barry Song
[not found] ` <CAGsJ_4wp+wcPTOpCfxe61uuQ2xkY4HkKCd2OD9wF=oPaP-U9mg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-01-15 8:52 ` Axel Lin
2014-01-15 8:48 ` Axel Lin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1389772636.13585.1.camel@phoenix \
--to=axel.lin-8e1dmatc8ynqt0dzr+alfa@public.gmane.org \
--cc=Baohua.Song-kQvG35nSl+M@public.gmane.org \
--cc=Qipan.Li-kQvG35nSl+M@public.gmane.org \
--cc=Zhiwu.Song-kQvG35nSl+M@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.