All of lore.kernel.org
 help / color / mirror / Atom feed
From: Valentine Barshak <valentine.barshak@cogentembedded.com>
To: linux-sh@vger.kernel.org, linux-ide@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>, Simon Horman <horms@verge.net.au>,
	Magnus Damm <magnus.damm@gmail.com>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: [PATCH] libata, dt: Add clocks to sata_rcar bindings
Date: Thu, 16 Jan 2014 22:07:42 +0000	[thread overview]
Message-ID: <1389910062-17777-1-git-send-email-valentine.barshak@cogentembedded.com> (raw)


Now that the clocks are available in the R-Car Gen2 DT,
add clocks property description to the sata_rcar bindings.
The clocks have been tested on r8a7791 so we use that
as an example of the R-Car SATA node.

The patch is against for-next branch of the libata git repo.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
---
 Documentation/devicetree/bindings/ata/sata_rcar.txt | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
index 1e61113..6da60c0 100644
--- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
+++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
@@ -7,12 +7,14 @@ Required properties:
 			  - "renesas,sata-r8a7791" for R-Car M2
 - reg			: address and length of the SATA registers;
 - interrupts		: must consist of one interrupt specifier.
+- clocks		: must contain a phandle and clock-specifier pair.
 
 Example:
 
-sata: sata@fc600000 {
-	compatible = "renesas,sata-r8a7779";
-	reg = <0xfc600000 0x2000>;
+sata0: sata@ee300000 {
+	compatible = "renesas,sata-r8a7791";
+	reg = <0 0xee300000 0 0x2000>;
 	interrupt-parent = <&gic>;
-	interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
 };
-- 
1.8.3.1


WARNING: multiple messages have this Message-ID (diff)
From: Valentine Barshak <valentine.barshak@cogentembedded.com>
To: linux-sh@vger.kernel.org, linux-ide@vger.kernel.org,
	devicetree@vger.kernel.org
Cc: Tejun Heo <tj@kernel.org>, Simon Horman <horms@verge.net.au>,
	Magnus Damm <magnus.damm@gmail.com>,
	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Subject: [PATCH] libata, dt: Add clocks to sata_rcar bindings
Date: Fri, 17 Jan 2014 02:07:42 +0400	[thread overview]
Message-ID: <1389910062-17777-1-git-send-email-valentine.barshak@cogentembedded.com> (raw)


Now that the clocks are available in the R-Car Gen2 DT,
add clocks property description to the sata_rcar bindings.
The clocks have been tested on r8a7791 so we use that
as an example of the R-Car SATA node.

The patch is against for-next branch of the libata git repo.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
---
 Documentation/devicetree/bindings/ata/sata_rcar.txt | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/ata/sata_rcar.txt b/Documentation/devicetree/bindings/ata/sata_rcar.txt
index 1e61113..6da60c0 100644
--- a/Documentation/devicetree/bindings/ata/sata_rcar.txt
+++ b/Documentation/devicetree/bindings/ata/sata_rcar.txt
@@ -7,12 +7,14 @@ Required properties:
 			  - "renesas,sata-r8a7791" for R-Car M2
 - reg			: address and length of the SATA registers;
 - interrupts		: must consist of one interrupt specifier.
+- clocks		: must contain a phandle and clock-specifier pair.
 
 Example:
 
-sata: sata@fc600000 {
-	compatible = "renesas,sata-r8a7779";
-	reg = <0xfc600000 0x2000>;
+sata0: sata@ee300000 {
+	compatible = "renesas,sata-r8a7791";
+	reg = <0 0xee300000 0 0x2000>;
 	interrupt-parent = <&gic>;
-	interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
+	interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp8_clks R8A7791_CLK_SATA0>;
 };
-- 
1.8.3.1


             reply	other threads:[~2014-01-16 22:07 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-16 22:07 Valentine Barshak [this message]
2014-01-16 22:07 ` [PATCH] libata, dt: Add clocks to sata_rcar bindings Valentine Barshak
2014-01-19 20:16 ` Laurent Pinchart
2014-01-19 20:16   ` Laurent Pinchart
2014-01-20  9:31   ` Mark Rutland
2014-01-20 15:29     ` Laurent Pinchart
2014-01-20 15:29       ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389910062-17777-1-git-send-email-valentine.barshak@cogentembedded.com \
    --to=valentine.barshak@cogentembedded.com \
    --cc=devicetree@vger.kernel.org \
    --cc=horms@verge.net.au \
    --cc=kuninori.morimoto.gx@renesas.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-sh@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.