From: Roger Quadros <rogerq@ti.com>
To: <tony@atomide.com>, <bcousson@baylibre.com>, <lee.jones@linaro.org>
Cc: <balbi@ti.com>, <nm@ti.com>, <khilman@linaro.org>,
<linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-usb@vger.kernel.org>, Roger Quadros <rogerq@ti.com>,
Alan Stern <stern@rowland.harvard.edu>
Subject: [PATCH v8 14/14] usb: omap: dts: Update DT binding example usage
Date: Thu, 20 Feb 2014 13:40:09 +0200 [thread overview]
Message-ID: <1392896409-5101-15-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1392896409-5101-1-git-send-email-rogerq@ti.com>
Remove non-compatible id from examples.
CC: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
Documentation/devicetree/bindings/usb/ehci-omap.txt | 2 +-
Documentation/devicetree/bindings/usb/ohci-omap3.txt | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt
index 485a9a1..3dc231c 100644
--- a/Documentation/devicetree/bindings/usb/ehci-omap.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt
@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/mfd/omap-usb-host.txt
Example for OMAP4:
usbhsehci: ehci@4a064c00 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupts = <0 77 0x4>;
};
diff --git a/Documentation/devicetree/bindings/usb/ohci-omap3.txt b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
index 14ab428..ce8c47cff 100644
--- a/Documentation/devicetree/bindings/usb/ohci-omap3.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
@@ -9,7 +9,7 @@ Required properties:
Example for OMAP4:
usbhsohci: ohci@4a064800 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupts = <0 76 0x4>;
};
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com>
To: tony@atomide.com, bcousson@baylibre.com, lee.jones@linaro.org
Cc: balbi@ti.com, nm@ti.com, khilman@linaro.org,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
linux-usb@vger.kernel.org, Roger Quadros <rogerq@ti.com>,
Alan Stern <stern@rowland.harvard.edu>
Subject: [PATCH v8 14/14] usb: omap: dts: Update DT binding example usage
Date: Thu, 20 Feb 2014 13:40:09 +0200 [thread overview]
Message-ID: <1392896409-5101-15-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1392896409-5101-1-git-send-email-rogerq@ti.com>
Remove non-compatible id from examples.
CC: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
Documentation/devicetree/bindings/usb/ehci-omap.txt | 2 +-
Documentation/devicetree/bindings/usb/ohci-omap3.txt | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt
index 485a9a1..3dc231c 100644
--- a/Documentation/devicetree/bindings/usb/ehci-omap.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt
@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/mfd/omap-usb-host.txt
Example for OMAP4:
usbhsehci: ehci@4a064c00 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupts = <0 77 0x4>;
};
diff --git a/Documentation/devicetree/bindings/usb/ohci-omap3.txt b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
index 14ab428..ce8c47cff 100644
--- a/Documentation/devicetree/bindings/usb/ohci-omap3.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
@@ -9,7 +9,7 @@ Required properties:
Example for OMAP4:
usbhsohci: ohci@4a064800 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupts = <0 76 0x4>;
};
--
1.8.3.2
WARNING: multiple messages have this Message-ID (diff)
From: rogerq@ti.com (Roger Quadros)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 14/14] usb: omap: dts: Update DT binding example usage
Date: Thu, 20 Feb 2014 13:40:09 +0200 [thread overview]
Message-ID: <1392896409-5101-15-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1392896409-5101-1-git-send-email-rogerq@ti.com>
Remove non-compatible id from examples.
CC: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
Documentation/devicetree/bindings/usb/ehci-omap.txt | 2 +-
Documentation/devicetree/bindings/usb/ohci-omap3.txt | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/ehci-omap.txt b/Documentation/devicetree/bindings/usb/ehci-omap.txt
index 485a9a1..3dc231c 100644
--- a/Documentation/devicetree/bindings/usb/ehci-omap.txt
+++ b/Documentation/devicetree/bindings/usb/ehci-omap.txt
@@ -21,7 +21,7 @@ Documentation/devicetree/bindings/mfd/omap-usb-host.txt
Example for OMAP4:
usbhsehci: ehci at 4a064c00 {
- compatible = "ti,ehci-omap", "usb-ehci";
+ compatible = "ti,ehci-omap";
reg = <0x4a064c00 0x400>;
interrupts = <0 77 0x4>;
};
diff --git a/Documentation/devicetree/bindings/usb/ohci-omap3.txt b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
index 14ab428..ce8c47cff 100644
--- a/Documentation/devicetree/bindings/usb/ohci-omap3.txt
+++ b/Documentation/devicetree/bindings/usb/ohci-omap3.txt
@@ -9,7 +9,7 @@ Required properties:
Example for OMAP4:
usbhsohci: ohci at 4a064800 {
- compatible = "ti,ohci-omap3", "usb-ohci";
+ compatible = "ti,ohci-omap3";
reg = <0x4a064800 0x400>;
interrupts = <0 76 0x4>;
};
--
1.8.3.2
next prev parent reply other threads:[~2014-02-20 11:43 UTC|newest]
Thread overview: 77+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-20 11:39 [PATCH v8 00/14] USB Host support for OMAP5 uEVM Roger Quadros
2014-02-20 11:39 ` Roger Quadros
2014-02-20 11:39 ` Roger Quadros
2014-02-20 11:39 ` [PATCH v8 01/14] mfd: omap-usb-host: Get clocks based on hardware revision Roger Quadros
2014-02-20 11:39 ` Roger Quadros
2014-02-20 11:39 ` Roger Quadros
2014-02-25 9:37 ` Lee Jones
2014-02-25 9:37 ` Lee Jones
2014-02-25 9:37 ` Lee Jones
2014-02-25 9:40 ` Roger Quadros
2014-02-25 9:40 ` Roger Quadros
2014-02-25 9:40 ` Roger Quadros
2014-02-20 11:39 ` [PATCH v8 02/14] mfd: omap-usb-host: Always fail on clk_get() error Roger Quadros
2014-02-20 11:39 ` Roger Quadros
2014-02-20 11:39 ` Roger Quadros
2014-02-25 9:59 ` Lee Jones
2014-02-25 9:59 ` Lee Jones
2014-02-25 9:59 ` Lee Jones
2014-02-25 10:28 ` Lee Jones
2014-02-25 10:28 ` Lee Jones
2014-02-25 10:28 ` Lee Jones
2014-02-20 11:39 ` [PATCH v8 03/14] mfd: omap-usb-host: Use clock names as per function for reference clocks Roger Quadros
2014-02-20 11:39 ` Roger Quadros
2014-02-20 11:39 ` Roger Quadros
2014-02-25 8:52 ` Lee Jones
2014-02-25 8:52 ` Lee Jones
2014-02-25 8:52 ` Lee Jones
2014-02-25 9:02 ` Roger Quadros
2014-02-25 9:02 ` Roger Quadros
2014-02-25 9:02 ` Roger Quadros
2014-02-25 9:18 ` Lee Jones
2014-02-25 9:18 ` Lee Jones
2014-02-25 9:18 ` Lee Jones
2014-02-25 9:25 ` Roger Quadros
2014-02-25 9:25 ` Roger Quadros
2014-02-25 9:25 ` Roger Quadros
2014-02-20 11:39 ` [PATCH v8 04/14] mfd: omap-usb-host: Update DT clock binding information Roger Quadros
2014-02-20 11:39 ` Roger Quadros
2014-02-20 11:39 ` Roger Quadros
2014-02-20 11:40 ` [PATCH v8 05/14] mfd: omap-usb-tll: " Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` [PATCH v8 06/14] CLK: TI: OMAP3: Get rid of unused USB Host dummy clocks Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-25 8:43 ` Mike Turquette
2014-02-25 8:43 ` Mike Turquette
2014-02-25 8:43 ` Mike Turquette
2014-02-25 9:32 ` Roger Quadros
2014-02-25 9:32 ` Roger Quadros
2014-02-25 9:32 ` Roger Quadros
2014-02-26 20:56 ` Mike Turquette
2014-02-26 20:56 ` Mike Turquette
2014-02-20 11:40 ` [PATCH v8 07/14] ARM: OMAP3: hwmod data: Remove optional clock from usb_host_hs module Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` [PATCH v8 08/14] ARM: dts: omap4: Update omap-usb-host node Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` [PATCH v8 09/14] ARM: dts: omap5: " Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` [PATCH v8 10/14] ARM: dts: omap4-panda: Provide USB PHY clock Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` [PATCH v8 11/14] ARM: dts: omap5-uevm: " Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` [PATCH v8 12/14] ARM: OMAP2+: Remove legacy_init_ehci_clk() Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` [PATCH v8 13/14] ARM: dts: OMAP2+: Get rid of incompatible ids for USB host nodes Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` Roger Quadros
2014-02-20 11:40 ` Roger Quadros [this message]
2014-02-20 11:40 ` [PATCH v8 14/14] usb: omap: dts: Update DT binding example usage Roger Quadros
2014-02-20 11:40 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392896409-5101-15-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=balbi@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@linaro.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nm@ti.com \
--cc=stern@rowland.harvard.edu \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.