All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	Rob Landley <rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org>,
	Wolfram Sang <wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: "Ivan T. Ivanov" <iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v3 1/2] i2c: qup: Add device tree bindings information
Date: Thu, 20 Feb 2014 16:38:09 -0800	[thread overview]
Message-ID: <1392943090-30556-2-git-send-email-bjorn.andersson@sonymobile.com> (raw)
In-Reply-To: <1392943090-30556-1-git-send-email-bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>

From: "Ivan T. Ivanov" <iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>

The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and
provide input and output FIFO's for it. I2C controller can operate
as master with supported bus speeds of 100Kbps and 400Kbps.

Signed-off-by: Ivan T. Ivanov <iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org>
[bjorn: reformulated part of binding description
        added version to compatible
        cleaned up example]
Signed-off-by: Bjorn Andersson <bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
---
 .../devicetree/bindings/i2c/qcom,i2c-qup.txt       |   44 ++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt

diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
new file mode 100644
index 0000000..38d505f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
@@ -0,0 +1,44 @@
+Qualcomm Universal Peripheral (QUP) I2C controller
+
+Required properties:
+ - compatible: Should be
+		"qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
+		"qcom,i2c-qup-v2.1.1" for 8974 v1.
+		"qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
+ - reg: Should contain QUP register address and length.
+ - interrupts: Should contain I2C interrupt.
+
+ - clocks: Should contain the core clock and the AHB clock.
+ - clock-names: Should be "core" for the core clock and "iface" for the
+                AHB clock.
+
+ - #address-cells: Should be <1> Address cells for i2c device address
+ - #size-cells: Should be <0> as i2c addresses have no size component
+
+Optional properties:
+ - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
+                    defaults to 100kHz if omitted.
+
+Child nodes should conform to i2c bus binding.
+
+Example:
+
+ i2c@f9924000 {
+ 	compatible = "qcom,i2c-qup-v2.2.1";
+ 	reg = <0xf9924000 0x1000>;
+ 	interrupts = <0 96 0>;
+
+ 	clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ 	clock-names = "core", "iface";
+
+ 	clock-frequency = <355000>;
+
+ 	#address-cells = <1>;
+ 	#size-cells = <0>;
+
+ 	dummy@60 {
+ 		compatible = "dummy";
+ 		reg = <0x60>;
+ 	};
+ };
+
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>, Rob Landley <rob@landley.net>,
	Wolfram Sang <wsa@the-dreams.de>,
	Grant Likely <grant.likely@linaro.org>,
	<devicetree@vger.kernel.org>, <linux-doc@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <linux-i2c@vger.kernel.org>,
	<linux-arm-msm@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>
Cc: "Ivan T. Ivanov" <iivanov@mm-sol.com>
Subject: [PATCH v3 1/2] i2c: qup: Add device tree bindings information
Date: Thu, 20 Feb 2014 16:38:09 -0800	[thread overview]
Message-ID: <1392943090-30556-2-git-send-email-bjorn.andersson@sonymobile.com> (raw)
In-Reply-To: <1392943090-30556-1-git-send-email-bjorn.andersson@sonymobile.com>

From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and
provide input and output FIFO's for it. I2C controller can operate
as master with supported bus speeds of 100Kbps and 400Kbps.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
[bjorn: reformulated part of binding description
        added version to compatible
        cleaned up example]
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
 .../devicetree/bindings/i2c/qcom,i2c-qup.txt       |   44 ++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt

diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
new file mode 100644
index 0000000..38d505f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
@@ -0,0 +1,44 @@
+Qualcomm Universal Peripheral (QUP) I2C controller
+
+Required properties:
+ - compatible: Should be
+		"qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
+		"qcom,i2c-qup-v2.1.1" for 8974 v1.
+		"qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
+ - reg: Should contain QUP register address and length.
+ - interrupts: Should contain I2C interrupt.
+
+ - clocks: Should contain the core clock and the AHB clock.
+ - clock-names: Should be "core" for the core clock and "iface" for the
+                AHB clock.
+
+ - #address-cells: Should be <1> Address cells for i2c device address
+ - #size-cells: Should be <0> as i2c addresses have no size component
+
+Optional properties:
+ - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
+                    defaults to 100kHz if omitted.
+
+Child nodes should conform to i2c bus binding.
+
+Example:
+
+ i2c@f9924000 {
+ 	compatible = "qcom,i2c-qup-v2.2.1";
+ 	reg = <0xf9924000 0x1000>;
+ 	interrupts = <0 96 0>;
+
+ 	clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ 	clock-names = "core", "iface";
+
+ 	clock-frequency = <355000>;
+
+ 	#address-cells = <1>;
+ 	#size-cells = <0>;
+
+ 	dummy@60 {
+ 		compatible = "dummy";
+ 		reg = <0x60>;
+ 	};
+ };
+
-- 
1.7.9.5


WARNING: multiple messages have this Message-ID (diff)
From: bjorn.andersson@sonymobile.com (Bjorn Andersson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] i2c: qup: Add device tree bindings information
Date: Thu, 20 Feb 2014 16:38:09 -0800	[thread overview]
Message-ID: <1392943090-30556-2-git-send-email-bjorn.andersson@sonymobile.com> (raw)
In-Reply-To: <1392943090-30556-1-git-send-email-bjorn.andersson@sonymobile.com>

From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

The Qualcomm Universal Peripherial (QUP) wraps I2C mini-core and
provide input and output FIFO's for it. I2C controller can operate
as master with supported bus speeds of 100Kbps and 400Kbps.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
[bjorn: reformulated part of binding description
        added version to compatible
        cleaned up example]
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
 .../devicetree/bindings/i2c/qcom,i2c-qup.txt       |   44 ++++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt

diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
new file mode 100644
index 0000000..38d505f
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-qup.txt
@@ -0,0 +1,44 @@
+Qualcomm Universal Peripheral (QUP) I2C controller
+
+Required properties:
+ - compatible: Should be
+		"qcom,i2c-qup-v1.1.1" for 8660, 8960 and 8064.
+		"qcom,i2c-qup-v2.1.1" for 8974 v1.
+		"qcom,i2c-qup-v2.2.1" for 8974 v2 and later.
+ - reg: Should contain QUP register address and length.
+ - interrupts: Should contain I2C interrupt.
+
+ - clocks: Should contain the core clock and the AHB clock.
+ - clock-names: Should be "core" for the core clock and "iface" for the
+                AHB clock.
+
+ - #address-cells: Should be <1> Address cells for i2c device address
+ - #size-cells: Should be <0> as i2c addresses have no size component
+
+Optional properties:
+ - clock-frequency: Should specify the desired i2c bus clock frequency in Hz,
+                    defaults to 100kHz if omitted.
+
+Child nodes should conform to i2c bus binding.
+
+Example:
+
+ i2c at f9924000 {
+ 	compatible = "qcom,i2c-qup-v2.2.1";
+ 	reg = <0xf9924000 0x1000>;
+ 	interrupts = <0 96 0>;
+
+ 	clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+ 	clock-names = "core", "iface";
+
+ 	clock-frequency = <355000>;
+
+ 	#address-cells = <1>;
+ 	#size-cells = <0>;
+
+ 	dummy at 60 {
+ 		compatible = "dummy";
+ 		reg = <0x60>;
+ 	};
+ };
+
-- 
1.7.9.5

  parent reply	other threads:[~2014-02-21  0:38 UTC|newest]

Thread overview: 64+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-21  0:38 [PATCH v3 0/2] Qualcomm Universal Peripheral (QUP) I2C controller Bjorn Andersson
2014-02-21  0:38 ` Bjorn Andersson
2014-02-21  0:38 ` Bjorn Andersson
     [not found] ` <1392943090-30556-1-git-send-email-bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
2014-02-21  0:38   ` Bjorn Andersson [this message]
2014-02-21  0:38     ` [PATCH v3 1/2] i2c: qup: Add device tree bindings information Bjorn Andersson
2014-02-21  0:38     ` Bjorn Andersson
2014-02-21 11:01     ` Mark Rutland
2014-02-21 11:01       ` Mark Rutland
2014-02-21 11:01       ` Mark Rutland
2014-02-21  0:38 ` [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller Bjorn Andersson
2014-02-21  0:38   ` Bjorn Andersson
2014-02-21  0:38   ` Bjorn Andersson
2014-02-21  0:52   ` Joe Perches
2014-02-21  0:52     ` Joe Perches
2014-02-24 17:51     ` Bjorn Andersson
2014-02-24 17:51       ` Bjorn Andersson
2014-02-24 17:51       ` Bjorn Andersson
2014-02-21  2:53   ` Emilio López
2014-02-21  2:53     ` Emilio López
2014-02-24 18:00     ` Bjorn Andersson
2014-02-24 18:00       ` Bjorn Andersson
2014-02-24 18:00       ` Bjorn Andersson
2014-02-21  8:16   ` Maxime Ripard
2014-02-21  8:16     ` Maxime Ripard
2014-02-21  8:16     ` Maxime Ripard
2014-02-24 18:03     ` Bjorn Andersson
2014-02-24 18:03       ` Bjorn Andersson
2014-02-24 18:03       ` Bjorn Andersson
2014-02-21 11:06   ` Mark Rutland
2014-02-21 11:06     ` Mark Rutland
2014-02-21 11:06     ` Mark Rutland
2014-02-25 16:07     ` Bjorn Andersson
2014-02-25 16:07       ` Bjorn Andersson
2014-02-25 16:07       ` Bjorn Andersson
2014-02-25 16:56       ` Andy Gross
2014-02-25 16:56         ` Andy Gross
2014-02-25 16:56         ` Andy Gross
     [not found]   ` <1392943090-30556-3-git-send-email-bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
2014-02-21 15:35     ` Kumar Gala
2014-02-21 15:35       ` Kumar Gala
2014-02-21 15:35       ` Kumar Gala
2014-02-24 10:33       ` Ivan T. Ivanov
2014-02-24 10:33         ` Ivan T. Ivanov
2014-02-24 17:40         ` Josh Cartwright
2014-02-24 17:40           ` Josh Cartwright
2014-02-24 18:05           ` Bjorn Andersson
2014-02-24 18:05             ` Bjorn Andersson
2014-02-24 18:05             ` Bjorn Andersson
2014-03-05 16:44   ` Wolfram Sang
2014-03-05 16:44     ` Wolfram Sang
  -- strict thread matches above, loose matches on Subject: below --
2014-01-17 23:03 [PATCH v3 0/2] Qualcomm Universal Peripheral (QUP) " Bjorn Andersson
2014-01-17 23:03 ` [PATCH v3 1/2] i2c: qup: Add device tree bindings information Bjorn Andersson
2014-01-17 23:03   ` Bjorn Andersson
2014-01-20 14:10   ` Rob Herring
2014-01-20 14:10     ` Rob Herring
2014-01-20 14:10     ` Rob Herring
2014-01-21  2:40     ` Stephen Boyd
2014-01-21  2:40       ` Stephen Boyd
2014-01-24  7:18       ` Andy Gross
2014-01-24  7:18         ` Andy Gross
2014-01-23 19:11     ` Matthew Locke
2014-01-23 19:11       ` Matthew Locke
2014-01-23 19:50       ` Arnd Bergmann
2014-01-23 19:50         ` Arnd Bergmann
2014-01-23 20:22       ` Bjorn Andersson
2014-01-23 20:22         ` Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1392943090-30556-2-git-send-email-bjorn.andersson@sonymobile.com \
    --to=bjorn.andersson-/mt0ovthwylzjqsbc5gl+g@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=iivanov-NEYub+7Iv8PQT0dZR+AlfA@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-arm-msm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-doc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=rob-VoJi6FS/r0vR7s880joybQ@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=wsa-z923LK4zBo2bacvFa/9K2g@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.