All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jarkko Nikula <jarkko.nikula@linux.intel.com>
To: alsa-devel@alsa-project.org
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>,
	Mark Brown <broonie@kernel.org>,
	Jarkko Nikula <jarkko.nikula@linux.intel.com>,
	Liam Girdwood <lgirdwood@gmail.com>
Subject: [PATCH 2/7] ASoC: Intel: Add Intel Baytrail SST DSP support
Date: Mon, 24 Feb 2014 17:26:57 +0200	[thread overview]
Message-ID: <1393255622-31365-3-git-send-email-jarkko.nikula@linux.intel.com> (raw)
In-Reply-To: <1393255622-31365-1-git-send-email-jarkko.nikula@linux.intel.com>

This adds basic functionality for Baytrail SST DSP initialization and
firmware loading.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
---
 sound/soc/intel/sst-baytrail-dsp.c | 372 +++++++++++++++++++++++++++++++++++++
 sound/soc/intel/sst-dsp-priv.h     |   1 +
 2 files changed, 373 insertions(+)
 create mode 100644 sound/soc/intel/sst-baytrail-dsp.c

diff --git a/sound/soc/intel/sst-baytrail-dsp.c b/sound/soc/intel/sst-baytrail-dsp.c
new file mode 100644
index 000000000000..a50bf7fc0e3a
--- /dev/null
+++ b/sound/soc/intel/sst-baytrail-dsp.c
@@ -0,0 +1,372 @@
+/*
+ * Intel Baytrail SST DSP driver
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/firmware.h>
+
+#include "sst-dsp.h"
+#include "sst-dsp-priv.h"
+#include "sst-baytrail-ipc.h"
+
+#define SST_BYT_FW_SIGNATURE_SIZE	4
+#define SST_BYT_FW_SIGN			"$SST"
+
+#define SST_BYT_IRAM_OFFSET	0xC0000
+#define SST_BYT_DRAM_OFFSET	0x100000
+#define SST_BYT_SHIM_OFFSET	0x140000
+
+enum sst_ram_type {
+	SST_BYT_IRAM	= 1,
+	SST_BYT_DRAM	= 2,
+	SST_BYT_CACHE	= 3,
+};
+
+struct dma_block_info {
+	enum sst_ram_type	type;	/* IRAM/DRAM */
+	u32			size;	/* Bytes */
+	u32			ram_offset; /* Offset in I/DRAM */
+	u32			rsvd;	/* Reserved field */
+};
+
+struct fw_header {
+	unsigned char signature[SST_BYT_FW_SIGNATURE_SIZE];
+	u32 file_size; /* size of fw minus this header */
+	u32 modules; /*  # of modules */
+	u32 file_format; /* version of header format */
+	u32 reserved[4];
+};
+
+struct sst_byt_fw_module_header {
+	unsigned char signature[SST_BYT_FW_SIGNATURE_SIZE];
+	u32 mod_size; /* size of module */
+	u32 blocks; /* # of blocks */
+	u32 type; /* codec type, pp lib */
+	u32 entry_point;
+};
+
+static int sst_byt_parse_module(struct sst_dsp *dsp, struct sst_fw *fw,
+				struct sst_byt_fw_module_header *module)
+{
+	struct dma_block_info *block;
+	struct sst_module *mod;
+	struct sst_module_data block_data;
+	struct sst_module_template template;
+	int count;
+
+	memset(&template, 0, sizeof(template));
+	template.id = module->type;
+	template.entry = module->entry_point;
+	template.p.type = SST_MEM_DRAM;
+	template.p.data_type = SST_DATA_P;
+	template.s.type = SST_MEM_DRAM;
+	template.s.data_type = SST_DATA_S;
+
+	mod = sst_module_new(fw, &template, NULL);
+	if (mod == NULL)
+		return -ENOMEM;
+
+	block = (void *)module + sizeof(*module);
+
+	for (count = 0; count < module->blocks; count++) {
+
+		if (block->size <= 0) {
+			dev_err(dsp->dev, "block %d size invalid\n", count);
+			return -EINVAL;
+		}
+
+		switch (block->type) {
+		case SST_BYT_IRAM:
+			block_data.offset = block->ram_offset +
+					    dsp->addr.iram_offset;
+			block_data.type = SST_MEM_IRAM;
+			break;
+		case SST_BYT_DRAM:
+			block_data.offset = block->ram_offset +
+					    dsp->addr.dram_offset;
+			block_data.type = SST_MEM_DRAM;
+			break;
+		case SST_BYT_CACHE:
+			block_data.offset = block->ram_offset +
+					    (dsp->addr.fw_ext - dsp->addr.lpe);
+			block_data.type = SST_MEM_CACHE;
+			break;
+		default:
+			dev_err(dsp->dev, "wrong ram type 0x%x in block0x%x\n",
+				block->type, count);
+			return -EINVAL;
+		}
+
+		block_data.size = block->size;
+		block_data.data_type = SST_DATA_M;
+		block_data.data = (void *)block + sizeof(*block);
+
+		sst_module_insert_fixed_block(mod, &block_data);
+
+		block = (void *)block + sizeof(*block) + block->size;
+	}
+	return 0;
+}
+
+static int sst_byt_parse_fw_image(struct sst_fw *sst_fw)
+{
+	struct fw_header *header;
+	struct sst_byt_fw_module_header *module;
+	struct sst_dsp *dsp = sst_fw->dsp;
+	int ret, count;
+
+	/* Read the header information from the data pointer */
+	header = (struct fw_header *)sst_fw->dma_buf;
+
+	/* verify FW */
+	if ((strncmp(header->signature, SST_BYT_FW_SIGN, 4) != 0) ||
+	    (sst_fw->size != header->file_size + sizeof(*header))) {
+		/* Invalid FW signature */
+		dev_err(dsp->dev, "Invalid FW sign/filesize mismatch\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dsp->dev,
+		"header sign=%4s size=0x%x modules=0x%x fmt=0x%x size=%zu\n",
+		header->signature, header->file_size, header->modules,
+		header->file_format, sizeof(*header));
+
+	module = (void *)sst_fw->dma_buf + sizeof(*header);
+	for (count = 0; count < header->modules; count++) {
+		/* module */
+		ret = sst_byt_parse_module(dsp, sst_fw, module);
+		if (ret < 0) {
+			dev_err(dsp->dev, "invalid module %d\n", count);
+			return ret;
+		}
+		module = (void *)module + sizeof(*module) + module->mod_size;
+	}
+
+	return 0;
+}
+
+static void sst_byt_dump_shim(struct sst_dsp *sst)
+{
+	int i;
+	u64 reg;
+
+	for (i = 0; i <= 0xF0; i += 8) {
+		reg = sst_dsp_shim_read64_unlocked(sst, i);
+		if (reg)
+			dev_dbg(sst->dev, "shim 0x%2.2x value 0x%16.16llx\n",
+				i, reg);
+	}
+
+	for (i = 0x00; i <= 0xff; i += 4) {
+		reg = readl(sst->addr.pci_cfg + i);
+		if (reg)
+			dev_dbg(sst->dev, "pci 0x%2.2x value 0x%8.8x\n",
+				i, (u32)reg);
+	}
+}
+
+static irqreturn_t sst_byt_irq(int irq, void *context)
+{
+	struct sst_dsp *sst = (struct sst_dsp *) context;
+	u64 isrx;
+	irqreturn_t ret = IRQ_NONE;
+
+	spin_lock(&sst->spinlock);
+
+	isrx = sst_dsp_shim_read64_unlocked(sst, SST_ISRX);
+	if (isrx & SST_ISRX_DONE) {
+		/* ADSP has processed the message request from IA */
+		sst_dsp_shim_update_bits64_unlocked(sst, SST_IPCX,
+						    SST_BYT_IPCX_DONE, 0);
+		ret = IRQ_WAKE_THREAD;
+	}
+	if (isrx & SST_BYT_ISRX_REQUEST) {
+		/* mask message request from ADSP and do processing later */
+		sst_dsp_shim_update_bits64_unlocked(sst, SST_IMRX,
+						    SST_BYT_IMRX_REQUEST,
+						    SST_BYT_IMRX_REQUEST);
+		ret = IRQ_WAKE_THREAD;
+	}
+
+	spin_unlock(&sst->spinlock);
+
+	return ret;
+}
+
+static void sst_byt_boot(struct sst_dsp *sst)
+{
+	int tries = 10;
+
+	/* release stall and wait to unstall */
+	sst_dsp_shim_update_bits64(sst, SST_CSR, SST_BYT_CSR_STALL, 0x0);
+	while (tries--) {
+		if (!(sst_dsp_shim_read64(sst, SST_CSR) &
+		      SST_BYT_CSR_PWAITMODE))
+			break;
+		msleep(100);
+	}
+	if (tries < 0) {
+		dev_err(sst->dev, "unable to start DSP\n");
+		sst_byt_dump_shim(sst);
+	}
+}
+
+static void sst_byt_reset(struct sst_dsp *sst)
+{
+	/* put DSP into reset, set reset vector and stall */
+	sst_dsp_shim_update_bits64(sst, SST_CSR,
+		SST_BYT_CSR_RST | SST_BYT_CSR_VECTOR_SEL | SST_BYT_CSR_STALL,
+		SST_BYT_CSR_RST | SST_BYT_CSR_VECTOR_SEL | SST_BYT_CSR_STALL);
+
+	udelay(10);
+
+	/* take DSP out of reset and keep stalled for FW loading */
+	sst_dsp_shim_update_bits64(sst, SST_CSR, SST_BYT_CSR_RST, 0);
+}
+
+struct sst_adsp_memregion {
+	u32 start;
+	u32 end;
+	int blocks;
+	enum sst_mem_type type;
+};
+
+/* BYT test stuff */
+static const struct sst_adsp_memregion byt_region[] = {
+	{0xC0000, 0x100000, 8, SST_MEM_IRAM}, /* I-SRAM - 8 * 32kB */
+	{0x100000, 0x140000, 8, SST_MEM_DRAM}, /* D-SRAM0 - 8 * 32kB */
+};
+
+static int sst_byt_resource_map(struct sst_dsp *sst, struct sst_pdata *pdata)
+{
+	sst->addr.lpe_base = pdata->lpe_base;
+	sst->addr.lpe = ioremap(pdata->lpe_base, pdata->lpe_size);
+	if (!sst->addr.lpe)
+		return -ENODEV;
+
+	/* ADSP PCI MMIO config space */
+	sst->addr.pci_cfg = ioremap(pdata->pcicfg_base, pdata->pcicfg_size);
+	if (!sst->addr.pci_cfg) {
+		iounmap(sst->addr.lpe);
+		return -ENODEV;
+	}
+
+	/* SST Extended FW allocation */
+	sst->addr.fw_ext = ioremap(pdata->fw_base, pdata->fw_size);
+	if (!sst->addr.fw_ext) {
+		iounmap(sst->addr.pci_cfg);
+		iounmap(sst->addr.lpe);
+		return -ENODEV;
+	}
+
+	/* SST Shim */
+	sst->addr.shim = sst->addr.lpe + sst->addr.shim_offset;
+
+	sst_dsp_mailbox_init(sst, SST_BYT_MAILBOX_OFFSET + 0x204,
+			     SST_BYT_IPC_MAX_PAYLOAD_SIZE,
+			     SST_BYT_MAILBOX_OFFSET,
+			     SST_BYT_IPC_MAX_PAYLOAD_SIZE);
+
+	sst->irq = pdata->irq;
+
+	return 0;
+}
+
+static int sst_byt_init(struct sst_dsp *sst, struct sst_pdata *pdata)
+{
+	const struct sst_adsp_memregion *region;
+	struct device *dev;
+	int ret = -ENODEV, i, j, region_count;
+	u32 offset, size;
+
+	dev = sst->dev;
+
+	switch (sst->id) {
+	case SST_DEV_ID_BYT:
+		region = byt_region;
+		region_count = ARRAY_SIZE(byt_region);
+		sst->addr.iram_offset = SST_BYT_IRAM_OFFSET;
+		sst->addr.dram_offset = SST_BYT_DRAM_OFFSET;
+		sst->addr.shim_offset = SST_BYT_SHIM_OFFSET;
+		break;
+	default:
+		dev_err(dev, "failed to get mem resources\n");
+		return ret;
+	}
+
+	ret = sst_byt_resource_map(sst, pdata);
+	if (ret < 0) {
+		dev_err(dev, "failed to map resources\n");
+		return ret;
+	}
+
+	/*
+	 * save the physical address of extended firmware block in the first
+	 * 4 bytes of the mailbox
+	 */
+	memcpy_toio(sst->addr.lpe + SST_BYT_MAILBOX_OFFSET,
+	       &pdata->fw_base, sizeof(u32));
+
+	ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
+	if (ret)
+		return ret;
+
+	/* enable Interrupt from both sides */
+	sst_dsp_shim_update_bits64(sst, SST_IMRX, 0x3, 0x0);
+	sst_dsp_shim_update_bits64(sst, SST_IMRD, 0x3, 0x0);
+
+	/* register DSP memory blocks - ideally we should get this from ACPI */
+	for (i = 0; i < region_count; i++) {
+		offset = region[i].start;
+		size = (region[i].end - region[i].start) / region[i].blocks;
+
+		/* register individual memory blocks */
+		for (j = 0; j < region[i].blocks; j++) {
+			sst_mem_block_register(sst, offset, size,
+					       region[i].type, NULL, j, sst);
+			offset += size;
+		}
+	}
+
+	return 0;
+}
+
+static void sst_byt_free(struct sst_dsp *sst)
+{
+	sst_mem_block_unregister_all(sst);
+	iounmap(sst->addr.lpe);
+	iounmap(sst->addr.pci_cfg);
+	iounmap(sst->addr.fw_ext);
+}
+
+struct sst_ops sst_byt_ops = {
+	.reset = sst_byt_reset,
+	.boot = sst_byt_boot,
+	.write = sst_shim32_write,
+	.read = sst_shim32_read,
+	.write64 = sst_shim32_write64,
+	.read64 = sst_shim32_read64,
+	.ram_read = sst_memcpy_fromio_32,
+	.ram_write = sst_memcpy_toio_32,
+	.irq_handler = sst_byt_irq,
+	.init = sst_byt_init,
+	.free = sst_byt_free,
+	.parse_fw = sst_byt_parse_fw_image,
+};
diff --git a/sound/soc/intel/sst-dsp-priv.h b/sound/soc/intel/sst-dsp-priv.h
index fa2c780c888b..fe8e81aad646 100644
--- a/sound/soc/intel/sst-dsp-priv.h
+++ b/sound/soc/intel/sst-dsp-priv.h
@@ -66,6 +66,7 @@ struct sst_addr {
 	u32 lpe_base;
 	u32 shim_offset;
 	u32 iram_offset;
+	u32 dram_offset;
 	void __iomem *lpe;
 	void __iomem *shim;
 	void __iomem *pci_cfg;
-- 
1.8.5.3

  parent reply	other threads:[~2014-02-24 15:27 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-24 15:26 [PATCH 0/7] ASoC: Intel: Add support for Baytrail SST DSP Jarkko Nikula
2014-02-24 15:26 ` [PATCH 1/7] ASoC: Intel: Add Baytrail SST ID and Baytrail specific register bits Jarkko Nikula
2014-02-24 15:26 ` Jarkko Nikula [this message]
2014-02-24 15:26 ` [PATCH 3/7] ASoC: Intel: Add Intel Baytrail SST DSP IPC support Jarkko Nikula
2014-02-24 15:26 ` [PATCH 4/7] ASoC: Intel: Add Intel Baytrail SST PCM platform driver Jarkko Nikula
2014-02-24 15:27 ` [PATCH 5/7] ASoC: Intel: Add machine driver for Baytrail SST with RT5640 codec Jarkko Nikula
2014-02-25  4:42   ` Mark Brown
2014-02-24 15:27 ` [PATCH 6/7] ASoC: Intel: Add Baytrail SST and byt-rt5640 machine driver probing Jarkko Nikula
2014-02-24 15:27 ` [PATCH 7/7] ASoC: Intel: Add build support for Baytrail SST Jarkko Nikula
2014-02-24 20:16 ` [PATCH 0/7] ASoC: Intel: Add support for Baytrail SST DSP Liam Girdwood
2014-02-25  4:44 ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1393255622-31365-3-git-send-email-jarkko.nikula@linux.intel.com \
    --to=jarkko.nikula@linux.intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=liam.r.girdwood@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.