All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gabriel FERNANDEZ <gabriel.fernandez@st.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
	Mark Rutland <mark.rutland@arm.com>,
	Ian Campbell <ijc+devicetree@hellion.org.uk>,
	Kumar Gala <galak@codeaurora.org>, Rob Landley <rob@landley.net>,
	Russell King <linux@arm.linux.org.uk>,
	Grant Likely <grant.likely@linaro.org>
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-input@vger.kernel.org, kernel@stlinux.com,
	Lee Jones <lee.jones@linaro.org>,
	Gabriel Fernandez <gabriel.fernandez@linaro.org>,
	Giuseppe Condorelli <giuseppe.condorelli@st.com>,
	Gabriel Fernandez <gabriel.fernandez@st.com>
Subject: [PATCH v3 4/7] ARM: STi: DT: add keyscan for stih415
Date: Fri, 11 Apr 2014 16:33:33 +0200	[thread overview]
Message-ID: <1397226820-5604-7-git-send-email-gabriel.fernandez@linaro.org> (raw)
In-Reply-To: <1397226820-5604-1-git-send-email-gabriel.fernandez@linaro.org>

Add keyscan support for stih415.
It is put disabled by default because it is not enabled on all boards
Also there are PIOs conflict with already claimed lines.

Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 arch/arm/boot/dts/stih415-pinctrl.dtsi | 16 ++++++++++++++++
 arch/arm/boot/dts/stih415.dtsi         | 12 ++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index f09fb10..caeac7e 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -102,6 +102,22 @@
 				};
 			};
 
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&PIO0 2 ALT2 IN>;
+						keyin1 = <&PIO0 3 ALT2 IN>;
+						keyin2 = <&PIO0 4 ALT2 IN>;
+						keyin3 = <&PIO2 6 ALT2 IN>;
+
+						keyout0 = <&PIO1 6 ALT2 OUT>;
+						keyout1 = <&PIO1 7 ALT2 OUT>;
+						keyout2 = <&PIO0 6 ALT2 OUT>;
+						keyout3 = <&PIO2 7 ALT2 OUT>;
+					};
+				};
+			};
+
 			sbc_i2c0 {
 				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 					st,pins {
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
index d89064c..ba0905c 100644
--- a/arch/arm/boot/dts/stih415.dtsi
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -206,5 +206,17 @@
 			pinctrl-0	= <&pinctrl_ir>;
 			resets		= <&softreset STIH415_IRB_SOFTRESET>;
 		};
+
+		keyscan: keyscan@fe4b0000 {
+			compatible = "st,sti-keyscan";
+			status = "disabled";
+			reg = <0xfe4b0000 0x2000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+			clocks = <&CLK_SYSIN>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_keyscan>;
+			resets	= <&powerdown STIH415_KEYSCAN_POWERDOWN>,
+				  <&softreset STIH415_KEYSCAN_SOFTRESET>;
+		};
 	};
 };
-- 
1.9.1


WARNING: multiple messages have this Message-ID (diff)
From: gabriel.fernandez@st.com (Gabriel FERNANDEZ)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 4/7] ARM: STi: DT: add keyscan for stih415
Date: Fri, 11 Apr 2014 16:33:33 +0200	[thread overview]
Message-ID: <1397226820-5604-7-git-send-email-gabriel.fernandez@linaro.org> (raw)
In-Reply-To: <1397226820-5604-1-git-send-email-gabriel.fernandez@linaro.org>

Add keyscan support for stih415.
It is put disabled by default because it is not enabled on all boards
Also there are PIOs conflict with already claimed lines.

Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 arch/arm/boot/dts/stih415-pinctrl.dtsi | 16 ++++++++++++++++
 arch/arm/boot/dts/stih415.dtsi         | 12 ++++++++++++
 2 files changed, 28 insertions(+)

diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index f09fb10..caeac7e 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -102,6 +102,22 @@
 				};
 			};
 
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0 = <&PIO0 2 ALT2 IN>;
+						keyin1 = <&PIO0 3 ALT2 IN>;
+						keyin2 = <&PIO0 4 ALT2 IN>;
+						keyin3 = <&PIO2 6 ALT2 IN>;
+
+						keyout0 = <&PIO1 6 ALT2 OUT>;
+						keyout1 = <&PIO1 7 ALT2 OUT>;
+						keyout2 = <&PIO0 6 ALT2 OUT>;
+						keyout3 = <&PIO2 7 ALT2 OUT>;
+					};
+				};
+			};
+
 			sbc_i2c0 {
 				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 					st,pins {
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
index d89064c..ba0905c 100644
--- a/arch/arm/boot/dts/stih415.dtsi
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -206,5 +206,17 @@
 			pinctrl-0	= <&pinctrl_ir>;
 			resets		= <&softreset STIH415_IRB_SOFTRESET>;
 		};
+
+		keyscan: keyscan at fe4b0000 {
+			compatible = "st,sti-keyscan";
+			status = "disabled";
+			reg = <0xfe4b0000 0x2000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+			clocks = <&CLK_SYSIN>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_keyscan>;
+			resets	= <&powerdown STIH415_KEYSCAN_POWERDOWN>,
+				  <&softreset STIH415_KEYSCAN_SOFTRESET>;
+		};
 	};
 };
-- 
1.9.1

  parent reply	other threads:[~2014-04-11 14:36 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-11 14:33 [PATCH v3 0/7] Add ST Keyscan driver Gabriel FERNANDEZ
2014-04-11 14:33 ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 1/7] drivers: input: keyboard: st-keyscan: add keyscan driver Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 2/7] ARM: STi: DT: add keyscan for stih415 Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 2/7] driver: reset: sti: " Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 3/7] ARM: STi: DT: add keyscan for stih416 Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 3/7] driver: reset: sti: " Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` Gabriel FERNANDEZ [this message]
2014-04-11 14:33   ` [PATCH v3 4/7] ARM: STi: DT: add keyscan for stih415 Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 4/7] ARM: STi: DT: add keyscan for stih41x-b2000 Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 5/7] ARM: STi: DT: add keyscan for stih416 Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 5/7] ARM: multi_v7_defconfig: add ST Keyscan driver Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 6/7] ARM: STi: DT: add keyscan for stih41x-b2000 Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 6/7] driver: reset: sti: add keyscan for stih415 Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 7/7] ARM: multi_v7_defconfig: add ST Keyscan driver Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33 ` [PATCH v3 7/7] driver: reset: sti: add keyscan for stih416 Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:33   ` Gabriel FERNANDEZ
2014-04-11 14:53 ` [PATCH v3 0/7] Add ST Keyscan driver Gabriel Fernandez
2014-04-11 15:00 ` Gabriel Fernandez
2014-04-11 15:00   ` Gabriel Fernandez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1397226820-5604-7-git-send-email-gabriel.fernandez@linaro.org \
    --to=gabriel.fernandez@st.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=gabriel.fernandez@linaro.org \
    --cc=galak@codeaurora.org \
    --cc=giuseppe.condorelli@st.com \
    --cc=grant.likely@linaro.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=kernel@stlinux.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=rob@landley.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.