All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
To: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
	broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux ARM
	<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Subject: [PATCH 5/5] ARM: Kirkwood: t5325: Use simple-card to instantiate audio
Date: Thu, 17 Apr 2014 17:53:14 +0200	[thread overview]
Message-ID: <1397749994-24983-6-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1397749994-24983-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>

Add device tree nodes to instantiate the audio drivers on the HP T5325
device. Remove platform driver instantiating of the audio, which
results in board-t5325.c being removed.

Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
---
 arch/arm/boot/dts/kirkwood-t5325.dts | 25 +++++++++++++++++++++++++
 arch/arm/mach-mvebu/board-t5325.c    | 26 --------------------------
 arch/arm/mach-mvebu/board.h          |  6 ------
 arch/arm/mach-mvebu/kirkwood.c       |  3 ---
 4 files changed, 25 insertions(+), 35 deletions(-)
 delete mode 100644 arch/arm/mach-mvebu/board-t5325.c

diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index dbb730642543..2cf3fe38404d 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -192,6 +192,31 @@
 		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 	};
 
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPKOUT",
+			"Speaker", "SPKOUTN",
+			"MIC1", "Mic Jack",
+			"MIC2", "Mic Jack";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker",
+			"Microphone", "Mic Jack";
+
+		simple-audio-card,mclk-factor = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&alc5621>;
+		};
+	};
 };
 
 &mdio {
diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c
deleted file mode 100644
index f2401b298218..000000000000
--- a/arch/arm/mach-mvebu/board-t5325.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * HP T5325 Board Setup
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include "board.h"
-
-static struct platform_device hp_t5325_audio_device = {
-	.name		= "t5325-audio",
-	.id		= -1,
-};
-
-void __init t5325_init(void)
-{
-	platform_device_register(&hp_t5325_audio_device);
-}
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
index de7f0a191394..9c7bb4386f8b 100644
--- a/arch/arm/mach-mvebu/board.h
+++ b/arch/arm/mach-mvebu/board.h
@@ -13,10 +13,4 @@
 #ifndef __ARCH_MVEBU_BOARD_H
 #define __ARCH_MVEBU_BOARD_H
 
-#ifdef CONFIG_MACH_T5325
-void t5325_init(void);
-#else
-static inline void t5325_init(void) {};
-#endif
-
 #endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 120207fc36f1..c30bc316f40d 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -180,9 +180,6 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_pm_init();
 	kirkwood_dt_eth_fixup();
 
-	if (of_machine_is_compatible("hp,t5325"))
-		t5325_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
 }
 
-- 
1.9.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: andrew@lunn.ch (Andrew Lunn)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/5] ARM: Kirkwood: t5325: Use simple-card to instantiate audio
Date: Thu, 17 Apr 2014 17:53:14 +0200	[thread overview]
Message-ID: <1397749994-24983-6-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1397749994-24983-1-git-send-email-andrew@lunn.ch>

Add device tree nodes to instantiate the audio drivers on the HP T5325
device. Remove platform driver instantiating of the audio, which
results in board-t5325.c being removed.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 arch/arm/boot/dts/kirkwood-t5325.dts | 25 +++++++++++++++++++++++++
 arch/arm/mach-mvebu/board-t5325.c    | 26 --------------------------
 arch/arm/mach-mvebu/board.h          |  6 ------
 arch/arm/mach-mvebu/kirkwood.c       |  3 ---
 4 files changed, 25 insertions(+), 35 deletions(-)
 delete mode 100644 arch/arm/mach-mvebu/board-t5325.c

diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index dbb730642543..2cf3fe38404d 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -192,6 +192,31 @@
 		gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 	};
 
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,routing =
+			"Headphone Jack", "HPL",
+			"Headphone Jack", "HPR",
+			"Speaker", "SPKOUT",
+			"Speaker", "SPKOUTN",
+			"MIC1", "Mic Jack",
+			"MIC2", "Mic Jack";
+		simple-audio-card,widgets =
+			"Headphone", "Headphone Jack",
+			"Speaker", "Speaker",
+			"Microphone", "Mic Jack";
+
+		simple-audio-card,mclk-factor = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&audio>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&alc5621>;
+		};
+	};
 };
 
 &mdio {
diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c
deleted file mode 100644
index f2401b298218..000000000000
--- a/arch/arm/mach-mvebu/board-t5325.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * HP T5325 Board Setup
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew@lunn.ch>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include "board.h"
-
-static struct platform_device hp_t5325_audio_device = {
-	.name		= "t5325-audio",
-	.id		= -1,
-};
-
-void __init t5325_init(void)
-{
-	platform_device_register(&hp_t5325_audio_device);
-}
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
index de7f0a191394..9c7bb4386f8b 100644
--- a/arch/arm/mach-mvebu/board.h
+++ b/arch/arm/mach-mvebu/board.h
@@ -13,10 +13,4 @@
 #ifndef __ARCH_MVEBU_BOARD_H
 #define __ARCH_MVEBU_BOARD_H
 
-#ifdef CONFIG_MACH_T5325
-void t5325_init(void);
-#else
-static inline void t5325_init(void) {};
-#endif
-
 #endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 120207fc36f1..c30bc316f40d 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -180,9 +180,6 @@ static void __init kirkwood_dt_init(void)
 	kirkwood_pm_init();
 	kirkwood_dt_eth_fixup();
 
-	if (of_machine_is_compatible("hp,t5325"))
-		t5325_init();
-
 	of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
 }
 
-- 
1.9.2

  parent reply	other threads:[~2014-04-17 15:53 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-17 15:53 [PATCH 0/5] Simple-audio-card support for HP t5325 Andrew Lunn
2014-04-17 15:53 ` Andrew Lunn
     [not found] ` <1397749994-24983-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-04-17 15:53   ` [PATCH 1/5] ASoC: alc5623: Add device tree binding Andrew Lunn
2014-04-17 15:53     ` Andrew Lunn
2014-04-18 16:33     ` Mark Brown
2014-04-18 16:33       ` Mark Brown
     [not found]       ` <20140418163351.GI12304-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-04-18 18:17         ` Andrew Lunn
2014-04-18 18:17           ` Andrew Lunn
     [not found]           ` <20140418181735.GB32580-g2DYL2Zd6BY@public.gmane.org>
2014-04-18 18:44             ` Mark Brown
2014-04-18 18:44               ` Mark Brown
2014-04-28  7:01     ` Anil Kumar
2014-04-17 15:53   ` [PATCH 2/5] ARM: Kirkwood: Use DT to instansiate codec Andrew Lunn
2014-04-17 15:53     ` Andrew Lunn
     [not found]     ` <1397749994-24983-3-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-04-17 21:37       ` Jason Cooper
2014-04-17 21:37         ` Jason Cooper
2014-04-17 15:53   ` [PATCH 3/5] ARM: Kirkwood: DT: Add missing #sound-dai-cells property Andrew Lunn
2014-04-17 15:53     ` Andrew Lunn
2014-04-17 15:53   ` [PATCH 4/5] ASoC: simple-card: Support setting mclk via a fixed factor Andrew Lunn
2014-04-17 15:53     ` Andrew Lunn
     [not found]     ` <1397749994-24983-5-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-04-18 16:38       ` Mark Brown
2014-04-18 16:38         ` Mark Brown
2014-04-17 15:53   ` Andrew Lunn [this message]
2014-04-17 15:53     ` [PATCH 5/5] ARM: Kirkwood: t5325: Use simple-card to instantiate audio Andrew Lunn
2014-04-18  0:15   ` [PATCH 0/5] Simple-audio-card support for HP t5325 Jason Cooper
2014-04-18  0:15     ` Jason Cooper

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1397749994-24983-6-git-send-email-andrew@lunn.ch \
    --to=andrew-g2dyl2zd6by@public.gmane.org \
    --cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.