From: Rahul Sharma <rahul.sharma@samsung.com> To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org Cc: kgene.kim@samsung.com, inki.dae@samsung.com, tomasz.figa@gmail.com, joshi@samsung.com, r.sh.open@gmail.com, Rahul Sharma <rahul.sharma@samsung.com> Subject: [PATCH 7/7] ARM: dts: enable hdmi for exynos5420 based peach-pit board Date: Sun, 20 Apr 2014 16:54:04 +0530 [thread overview] Message-ID: <1397993044-14564-8-git-send-email-rahul.sharma@samsung.com> (raw) In-Reply-To: <1397993044-14564-1-git-send-email-rahul.sharma@samsung.com> From: Rahul Sharma <Rahul.Sharma@samsung.com> Enable hdmi for exynos5420 based peach-pit board. Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 26 ++++++++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi | 5 +++++ 2 files changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 4d61a5e..5b70522 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -54,6 +54,13 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; }; pinctrl@14010000 { @@ -222,4 +229,23 @@ watchdog@101D0000 { timeout-sec = <32>; }; + + i2c@12C80000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; + status = "okay"; + + hdmiddc@50 { + reg = <0x50>; + }; + }; + + hdmi@14530000 { + hpd-gpio = <&gpx3 7 2>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 663fca9..f474e96 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -642,10 +642,15 @@ clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; status = "disabled"; + phy = <&hdmiphy>; phys = <&simple_phys 0>; phy-names = "hdmiphy"; }; + hdmiphy: hdmiphy@145D0000 { + reg = <0x145D0000 0x20>; + }; + mixer@14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: rahul.sharma@samsung.com (Rahul Sharma) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 7/7] ARM: dts: enable hdmi for exynos5420 based peach-pit board Date: Sun, 20 Apr 2014 16:54:04 +0530 [thread overview] Message-ID: <1397993044-14564-8-git-send-email-rahul.sharma@samsung.com> (raw) In-Reply-To: <1397993044-14564-1-git-send-email-rahul.sharma@samsung.com> From: Rahul Sharma <Rahul.Sharma@samsung.com> Enable hdmi for exynos5420 based peach-pit board. Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com> --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 26 ++++++++++++++++++++++++++ arch/arm/boot/dts/exynos5420.dtsi | 5 +++++ 2 files changed, 31 insertions(+) diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 4d61a5e..5b70522 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -54,6 +54,13 @@ samsung,pin-pud = <0>; samsung,pin-drv = <0>; }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; }; pinctrl at 14010000 { @@ -222,4 +229,23 @@ watchdog at 101D0000 { timeout-sec = <32>; }; + + i2c at 12C80000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; + status = "okay"; + + hdmiddc at 50 { + reg = <0x50>; + }; + }; + + hdmi at 14530000 { + hpd-gpio = <&gpx3 7 2>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; + status = "okay"; + }; }; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 663fca9..f474e96 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -642,10 +642,15 @@ clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; status = "disabled"; + phy = <&hdmiphy>; phys = <&simple_phys 0>; phy-names = "hdmiphy"; }; + hdmiphy: hdmiphy at 145D0000 { + reg = <0x145D0000 0x20>; + }; + mixer at 14450000 { compatible = "samsung,exynos5420-mixer"; reg = <0x14450000 0x10000>; -- 1.7.9.5
next prev parent reply other threads:[~2014-04-20 11:24 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-04-20 11:23 [PATCH 0/7] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma 2014-04-20 11:23 ` Rahul Sharma [not found] ` <1397993044-14564-1-git-send-email-rahul.sharma-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> 2014-04-20 11:23 ` [PATCH 1/7] ARM: dtsi: add node for simple phy provider for exynos5250 Rahul Sharma 2014-04-20 11:23 ` Rahul Sharma 2014-04-20 11:23 ` [PATCH 2/7] ARM: dtsi: add node for simple phy provider for exynos5420 Rahul Sharma 2014-04-20 11:23 ` Rahul Sharma 2014-04-20 11:24 ` [PATCH 3/7] ARM: dtsi: add access to simple hdmiphy to exynos5250 hdmi node Rahul Sharma 2014-04-20 11:24 ` Rahul Sharma 2014-04-20 11:24 ` [PATCH 4/7] ARM: dtsi: add access to simple hdmiphy to exynos5420 " Rahul Sharma 2014-04-20 11:24 ` Rahul Sharma 2014-04-20 11:24 ` [PATCH 5/7] ARM: dts: enable hdmi for exynos5250 based snow board Rahul Sharma 2014-04-20 11:24 ` Rahul Sharma 2014-04-28 6:30 ` Tushar Behera 2014-04-28 6:30 ` Tushar Behera 2014-05-08 3:24 ` Rahul Sharma 2014-05-08 3:24 ` Rahul Sharma 2014-04-20 11:24 ` [PATCH 6/7] ARM: dts: change to correct compatible string for exynos5420 hdmi Rahul Sharma 2014-04-20 11:24 ` Rahul Sharma 2014-04-20 11:24 ` Rahul Sharma [this message] 2014-04-20 11:24 ` [PATCH 7/7] ARM: dts: enable hdmi for exynos5420 based peach-pit board Rahul Sharma
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1397993044-14564-8-git-send-email-rahul.sharma@samsung.com \ --to=rahul.sharma@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=inki.dae@samsung.com \ --cc=joshi@samsung.com \ --cc=kgene.kim@samsung.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=r.sh.open@gmail.com \ --cc=tomasz.figa@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.