[PATCH v2] drm/panel: Add support for EDT ETM0700G0DH6 and ET070080DH6 panels

[Philipp Zabel <p.zabel@pengutronix.de>]

The EDT ETM0700G0DH6 and ET070080DH6 are 7" 800x480 panels,
which can be supported by the simple panel driver.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
Changes since v1:
 - Added compatible for EDT ET070080DH6 panel, which is exactly the same panel
   minus the multitouch.
---
 drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 309f29e..72da48c 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -328,6 +328,29 @@ static const struct panel_desc chunghwa_claa101wb01 = {
 	},
 };
 
+static const struct drm_display_mode edt_etm0700g0dh6_mode = {
+	.clock = 33260,
+	.hdisplay = 800,
+	.hsync_start = 800 + 40,
+	.hsync_end = 800 + 40 + 128,
+	.htotal = 800 + 40 + 128 + 88,
+	.vdisplay = 480,
+	.vsync_start = 480 + 10,
+	.vsync_end = 480 + 10 + 2,
+	.vtotal = 480 + 10 + 2 + 33,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static const struct panel_desc edt_etm0700g0dh6 = {
+	.modes = &edt_etm0700g0dh6_mode,
+	.num_modes = 1,
+	.size = {
+		.width = 152,
+		.height = 91,
+	},
+};
+
 static const struct drm_display_mode lg_lp129qe_mode = {
 	.clock = 285250,
 	.hdisplay = 2560,
@@ -383,6 +406,12 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "chunghwa,claa101wb01",
 		.data = &chunghwa_claa101wb01
 	}, {
+		.compatible = "edt,et070080dh6",
+		.data = &edt_etm0700g0dh6,
+	}, {
+		.compatible = "edt,etm0700g0dh6",
+		.data = &edt_etm0700g0dh6,
+	}, {
 		.compatible = "lg,lp129qe",
 		.data = &lg_lp129qe,
 	}, {
-- 
2.0.0.rc0