[PATCH] ARM: sa1100: remove unused header

[Paul Bolle <pebolle@tiscali.nl>]

SA-1101.h was included in the tree shortly before v2.4.0. The #include
preprocessor directive that includes it has always depended on a
preprocessor check for CONFIG_SA1101. But the related (Kconfig) symbol
has never been part of the tree. Remove that preprocessor check and this
unused header.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
---
Tested only with git grep (on roughly 14 years of Linux history).

 arch/arm/mach-sa1100/include/mach/SA-1101.h  | 925 ---------------------------
 arch/arm/mach-sa1100/include/mach/hardware.h |   4 -
 2 files changed, 929 deletions(-)
 delete mode 100644 arch/arm/mach-sa1100/include/mach/SA-1101.h

diff --git a/arch/arm/mach-sa1100/include/mach/SA-1101.h b/arch/arm/mach-sa1100/include/mach/SA-1101.h
deleted file mode 100644
index 5d2ad7db991c..000000000000
--- a/arch/arm/mach-sa1100/include/mach/SA-1101.h
+++ /dev/null
@@ -1,925 +0,0 @@
-/*
- * SA-1101.h
- *
- * Copyright (c) Peter Danielsson 1999
- *
- * Definition of constants related to the sa1101
- * support chip for the sa1100
- *
- */
-
-
-/* Be sure that virtual mapping is defined right */
-#ifndef __ASM_ARCH_HARDWARE_H
-#error You must include hardware.h not SA-1101.h
-#endif
-
-#ifndef SA1101_BASE
-#error You must define SA-1101 physical base address
-#endif
-
-#ifndef LANGUAGE
-# ifdef __ASSEMBLY__
-#  define LANGUAGE Assembly
-# else
-#  define LANGUAGE C
-# endif
-#endif
-
-/*
- * We have mapped the sa1101 depending on the value of SA1101_BASE.
- * It then appears from 0xf4000000.
- */
-
-#define SA1101_p2v( x )         ((x) - SA1101_BASE + 0xf4000000)
-#define SA1101_v2p( x )         ((x) - 0xf4000000  + SA1101_BASE)
-
-#ifndef SA1101_p2v
-#define SA1101_p2v(PhAdd)  (PhAdd)
-#endif
-
-#include <mach/bitfield.h>
-
-#define C               0
-#define Assembly        1
-
-
-/*
- * Memory map
- */
-
-#define __SHMEM_CONTROL0	0x00000000
-#define __SYSTEM_CONTROL1	0x00000400
-#define __ARBITER		0x00020000
-#define __SYSTEM_CONTROL2	0x00040000
-#define __SYSTEM_CONTROL3	0x00060000
-#define __PARALLEL_PORT		0x00080000
-#define __VIDMEM_CONTROL	0x00100000
-#define __UPDATE_FIFO		0x00120000
-#define __SHMEM_CONTROL1	0x00140000
-#define __INTERRUPT_CONTROL	0x00160000
-#define __USB_CONTROL		0x00180000
-#define __TRACK_INTERFACE	0x001a0000
-#define __MOUSE_INTERFACE	0x001b0000
-#define __KEYPAD_INTERFACE	0x001c0000
-#define __PCMCIA_INTERFACE	0x001e0000
-#define	__VGA_CONTROL		0x00200000
-#define __GPIO_INTERFACE	0x00300000
-
-/*
- * Macro that calculates real address for registers in the SA-1101
- */
-
-#define _SA1101( x )    ((x) + SA1101_BASE)
-
-/*
- * Interface and shared memory controller registers
- *
- * Registers
- *	SKCR		SA-1101 control register (read/write)
- *	SMCR		Shared Memory Controller Register
- *	SNPR		Snoop Register
- */
-
-#define _SKCR		_SA1101( 0x00000000 ) /* SA-1101 Control Reg. */
-#define _SMCR		_SA1101( 0x00140000 ) /* Shared Mem. Control Reg. */
-#define _SNPR		_SA1101( 0x00140400 ) /* Snoop Reg. */
-
-#if LANGUAGE == C
-#define SKCR		(*((volatile Word *) SA1101_p2v (_SKCR)))
-#define SMCR		(*((volatile Word *) SA1101_p2v (_SMCR)))
-#define SNPR		(*((volatile Word *) SA1101_p2v (_SNPR)))
-
-#define SKCR_PLLEn	  0x0001	  /* Enable On-Chip PLL */
-#define SKCR_BCLKEn	  0x0002	  /* Enables BCLK */
-#define SKCR_Sleep	  0x0004	  /* Sleep Mode */
-#define SKCR_IRefEn	  0x0008	  /* DAC Iref input enable */
-#define SKCR_VCOON	  0x0010	  /* VCO bias */
-#define SKCR_ScanTestEn	  0x0020	  /* Enables scan test */
-#define SKCR_ClockTestEn  0x0040	  /* Enables clock test */
-
-#define SMCR_DCAC	  Fld(2,0)	  /* Number of column address bits */
-#define SMCR_DRAC	  Fld(2,2)	  /* Number of row address bits */
-#define SMCR_ArbiterBias  0x0008	  /* favor video or USB */
-#define SMCR_TopVidMem	  Fld(4,5)	  /* Top 4 bits of vidmem addr. */
-
-#define SMCR_ColAdrBits( x )		  /* col. addr bits 8..11 */ \
-	(( (x) - 8 ) << FShft (SMCR_DCAC))
-#define SMCR_RowAdrBits( x )		  /* row addr bits 9..12 */\
-	(( (x) - 9 ) << FShft (SMCR_DRAC))
-
-#define SNPR_VFBstart	  Fld(12,0)	/* Video frame buffer addr */
-#define SNPR_VFBsize	  Fld(11,12)	/* Video frame buffer size */
-#define SNPR_WholeBank	  (1 << 23)	/* Whole bank bit */
-#define SNPR_BankSelect	  Fld(2,27)	/* Bank select */
-#define SNPR_SnoopEn	  (1 << 31)	/* Enable snoop operation */
-
-#define SNPR_Set_VFBsize( x )   /* set frame buffer size (in kb) */ \
-	( (x) << FShft (SNPR_VFBsize))
-#define SNPR_Select_Bank(x)     /* select bank 0 or 1 */  \
-	(( (x) + 1 ) << FShft (SNPR_BankSelect ))
-
-#endif /* LANGUAGE == C */
-
-/*
- * Video Memory Controller
- *
- * Registers
- *    VMCCR	Configuration register
- *    VMCAR	VMC address register
- *    VMCDR	VMC data register
- *
- */
-
-#define _VMCCR		_SA1101( 0x00100000 )	/* Configuration register */
-#define _VMCAR		_SA1101( 0x00101000 )	/* VMC address register */
-#define _VMCDR		_SA1101( 0x00101400 )	/* VMC data register */
-
-#if LANGUAGE == C
-#define VMCCR		(*((volatile Word *) SA1101_p2v (_VMCCR)))
-#define VMCAR		(*((volatile Word *) SA1101_p2v (_VMCAR)))
-#define VMCDR		(*((volatile Word *) SA1101_p2v (_VMCDR)))
-
-#define VMCCR_RefreshEn	    0x0000	  /* Enable memory refresh */
-#define VMCCR_Config	    0x0001	  /* DRAM size */
-#define VMCCR_RefPeriod	    Fld(2,3)	  /* Refresh period */
-#define VMCCR_StaleDataWait Fld(4,5)	  /* Stale FIFO data timeout counter */
-#define VMCCR_SleepState    (1<<9)	  /* State of interface pins in sleep*/
-#define VMCCR_RefTest	    (1<<10)	  /* refresh test */
-#define VMCCR_RefLow	    Fld(6,11)	  /* refresh low counter */
-#define VMCCR_RefHigh	    Fld(7,17)	  /* refresh high counter */
-#define VMCCR_SDTCTest	    Fld(7,24)	  /* stale data timeout counter */
-#define VMCCR_ForceSelfRef  (1<<31)	  /* Force self refresh */
-
-#endif LANGUAGE == C
-
-
-/* Update FIFO
- *
- * Registers
- *    UFCR	Update FIFO Control Register
- *    UFSR	Update FIFO Status Register
- *    UFLVLR	update FIFO level register
- *    UFDR	update FIFO data register
- */
-
-#define _UFCR	_SA1101(0x00120000)   /* Update FIFO Control Reg. */
-#define _UFSR	_SA1101(0x00120400)   /* Update FIFO Status Reg. */	
-#define _UFLVLR	_SA1101(0x00120800)   /* Update FIFO level reg. */
-#define _UFDR	_SA1101(0x00120c00)   /* Update FIFO data reg. */
-
-#if LANGUAGE == C
-
-#define UFCR 	(*((volatile Word *) SA1101_p2v (_UFCR)))
-#define UFSR	(*((volatile Word *) SA1101_p2v (_UFSR)))
-#define UFLVLR	(*((volatile Word *) SA1101_p2v (_UFLVLR))) 
-#define UFDR	(*((volatile Word *) SA1101_p2v (_UFDR)))
-
-
-#define UFCR_FifoThreshhold	Fld(7,0)	/* Level for FifoGTn flag */
-
-#define UFSR_FifoGTnFlag	0x01		/* FifoGTn flag */#define UFSR_FifoEmpty		0x80		/* FIFO is empty */
-
-#endif /* LANGUAGE == C */
-
-/* System Controller
- *
- * Registers
- *    SKPCR	Power Control Register
- *    SKCDR	Clock Divider Register
- *    DACDR1	DAC1 Data register
- *    DACDR2	DAC2 Data register
- */
-
-#define _SKPCR		_SA1101(0x00000400)
-#define _SKCDR		_SA1101(0x00040000)
-#define _DACDR1		_SA1101(0x00060000)
-#define _DACDR2		_SA1101(0x00060400)
-
-#if LANGUAGE == C
-#define SKPCR 	(*((volatile Word *) SA1101_p2v (_SKPCR)))
-#define SKCDR	(*((volatile Word *) SA1101_p2v (_SKCDR)))
-#define DACDR1	(*((volatile Word *) SA1101_p2v (_DACDR1)))
-#define DACDR2	(*((volatile Word *) SA1101_p2v (_DACDR2)))
-
-#define SKPCR_UCLKEn	     0x01    /* USB Enable */
-#define SKPCR_PCLKEn	     0x02    /* PS/2 Enable */
-#define SKPCR_ICLKEn	     0x04    /* Interrupt Controller Enable */
-#define SKPCR_VCLKEn	     0x08    /* Video Controller Enable */
-#define SKPCR_PICLKEn	     0x10    /* parallel port Enable */
-#define SKPCR_DCLKEn	     0x20    /* DACs Enable */
-#define SKPCR_nKPADEn	     0x40    /* Multiplexer */
-
-#define SKCDR_PLLMul	     Fld(7,0)	/* PLL Multiplier */
-#define SKCDR_VCLKEn	     Fld(2,7)	/* Video controller clock divider */
-#define SKDCR_BCLKEn	     (1<<9)	/* BCLK Divider */
-#define SKDCR_UTESTCLKEn     (1<<10)	/* Route USB clock during test mode */
-#define SKDCR_DivRValue	     Fld(6,11)	/* Input clock divider for PLL */
-#define SKDCR_DivNValue	     Fld(5,17)	/* Output clock divider for PLL */
-#define SKDCR_PLLRSH	     Fld(3,22)	/* PLL bandwidth control */
-#define SKDCR_ChargePump     (1<<25)	/* Charge pump control */
-#define SKDCR_ClkTestMode    (1<<26)	/* Clock output test mode */
-#define SKDCR_ClkTestEn	     (1<<27)	/* Test clock generator */
-#define SKDCR_ClkJitterCntl  Fld(3,28)	/* video clock jitter compensation */
-
-#define DACDR_DACCount	     Fld(8,0)	/* Count value */
-#define DACDR1_DACCount	     DACDR_DACCount
-#define DACDR2_DACCount	     DACDR_DACCount
-
-#endif /* LANGUAGE == C */
-
-/*
- * Parallel Port Interface
- *
- * Registers
- *    IEEE_Config	IEEE mode selection and programmable attributes
- *    IEEE_Control	Controls the states of IEEE port control outputs
- *    IEEE_Data		Forward transfer data register
- *    IEEE_Addr		Forward transfer address register
- *    IEEE_Status	Port IO signal status register
- *    IEEE_IntStatus	Port interrupts status register
- *    IEEE_FifoLevels   Rx and Tx FIFO interrupt generation levels
- *    IEEE_InitTime	Forward timeout counter initial value
- *    IEEE_TimerStatus	Forward timeout counter current value
- *    IEEE_FifoReset	Reset forward transfer FIFO
- *    IEEE_ReloadValue	Counter reload value
- *    IEEE_TestControl	Control testmode
- *    IEEE_TestDataIn	Test data register
- *    IEEE_TestDataInEn	Enable test data
- *    IEEE_TestCtrlIn	Test control signals
- *    IEEE_TestCtrlInEn	Enable test control signals
- *    IEEE_TestDataStat	Current data bus value
- *
- */
-
-/*
- * The control registers are defined as offsets from a base address 
- */
- 
-#define _IEEE( x ) _SA1101( (x) + __PARALLEL_PORT )
-
-#define _IEEE_Config	    _IEEE( 0x0000 )
-#define _IEEE_Control	    _IEEE( 0x0400 )
-#define _IEEE_Data	    _IEEE( 0x4000 )
-#define _IEEE_Addr	    _IEEE( 0x0800 )
-#define _IEEE_Status	    _IEEE( 0x0c00 )
-#define _IEEE_IntStatus	    _IEEE( 0x1000 )
-#define _IEEE_FifoLevels    _IEEE( 0x1400 )
-#define _IEEE_InitTime	    _IEEE( 0x1800 )
-#define _IEEE_TimerStatus   _IEEE( 0x1c00 )
-#define _IEEE_FifoReset	    _IEEE( 0x2000 )
-#define _IEEE_ReloadValue   _IEEE( 0x3c00 )
-#define _IEEE_TestControl   _IEEE( 0x2400 )
-#define _IEEE_TestDataIn    _IEEE( 0x2800 )
-#define _IEEE_TestDataInEn  _IEEE( 0x2c00 )
-#define _IEEE_TestCtrlIn    _IEEE( 0x3000 )
-#define _IEEE_TestCtrlInEn  _IEEE( 0x3400 )
-#define _IEEE_TestDataStat  _IEEE( 0x3800 )
- 
-
-#if LANGUAGE == C
-#define IEEE_Config	    (*((volatile Word *) SA1101_p2v (_IEEE_Config)))
-#define IEEE_Control	    (*((volatile Word *) SA1101_p2v (_IEEE_Control)))
-#define IEEE_Data	    (*((volatile Word *) SA1101_p2v (_IEEE_Data)))
-#define IEEE_Addr	    (*((volatile Word *) SA1101_p2v (_IEEE_Addr)))
-#define IEEE_Status	    (*((volatile Word *) SA1101_p2v (_IEEE_Status)))
-#define IEEE_IntStatus	    (*((volatile Word *) SA1101_p2v (_IEEE_IntStatus)))
-#define IEEE_FifoLevels	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoLevels)))
-#define IEEE_InitTime	    (*((volatile Word *) SA1101_p2v (_IEEE_InitTime)))
-#define IEEE_TimerStatus    (*((volatile Word *) SA1101_p2v (_IEEE_TimerStatus)))
-#define IEEE_FifoReset	    (*((volatile Word *) SA1101_p2v (_IEEE_FifoReset)))
-#define IEEE_ReloadValue    (*((volatile Word *) SA1101_p2v (_IEEE_ReloadValue)))
-#define IEEE_TestControl    (*((volatile Word *) SA1101_p2v (_IEEE_TestControl)))
-#define IEEE_TestDataIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestDataIn)))
-#define IEEE_TestDataInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataInEn)))
-#define IEEE_TestCtrlIn     (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlIn)))
-#define IEEE_TestCtrlInEn   (*((volatile Word *) SA1101_p2v (_IEEE_TestCtrlInEn)))
-#define IEEE_TestDataStat   (*((volatile Word *) SA1101_p2v (_IEEE_TestDataStat)))
-
-
-#define IEEE_Config_M	    Fld(3,0)	 /* Mode select */
-#define IEEE_Config_D	    0x04	 /* FIFO access enable */
-#define IEEE_Config_B	    0x08	 /* 9-bit word enable */
-#define IEEE_Config_T	    0x10	 /* Data transfer enable */
-#define IEEE_Config_A	    0x20	 /* Data transfer direction */
-#define IEEE_Config_E	    0x40	 /* Timer enable */
-#define IEEE_Control_A	    0x08	 /* AutoFd output */
-#define IEEE_Control_E	    0x04	 /* Selectin output */
-#define IEEE_Control_T	    0x02	 /* Strobe output */
-#define IEEE_Control_I	    0x01	 /* Port init output */
-#define IEEE_Data_C	    (1<<31)	 /* Byte count */
-#define IEEE_Data_Db	    Fld(9,16)	 /* Data byte 2 */
-#define IEEE_Data_Da	    Fld(9,0)	 /* Data byte 1 */
-#define IEEE_Addr_A	    Fld(8,0)	 /* forward address transfer byte */
-#define IEEE_Status_A	    0x0100	 /* nAutoFd port output status */
-#define IEEE_Status_E	    0x0080	 /* nSelectIn port output status */
-#define IEEE_Status_T	    0x0040	 /* nStrobe port output status */
-#define IEEE_Status_I	    0x0020	 /* nInit port output status */
-#define IEEE_Status_B	    0x0010	 /* Busy port inout status */
-#define IEEE_Status_S	    0x0008	 /* Select port input status */
-#define IEEE_Status_K	    0x0004	 /* nAck port input status */
-#define IEEE_Status_F	    0x0002	 /* nFault port input status */
-#define IEEE_Status_R	    0x0001	 /* pError port input status */
-
-#define IEEE_IntStatus_IntReqDat	 0x0100
-#define IEEE_IntStatus_IntReqEmp	 0x0080
-#define IEEE_IntStatus_IntReqInt	 0x0040
-#define IEEE_IntStatus_IntReqRav	 0x0020
-#define IEEE_IntStatus_IntReqTim	 0x0010
-#define IEEE_IntStatus_RevAddrComp	 0x0008
-#define IEEE_IntStatus_RevDataComp	 0x0004
-#define IEEE_IntStatus_FwdAddrComp	 0x0002
-#define IEEE_IntStatus_FwdDataComp	 0x0001
-#define IEEE_FifoLevels_RevFifoLevel	 2
-#define IEEE_FifoLevels_FwdFifoLevel	 1
-#define IEEE_InitTime_TimValInit	 Fld(22,0)
-#define IEEE_TimerStatus_TimValStat	 Fld(22,0)
-#define IEEE_ReloadValue_Reload		 Fld(4,0)
-
-#define IEEE_TestControl_RegClk		 0x04
-#define IEEE_TestControl_ClockSelect	 Fld(2,1)
-#define IEEE_TestControl_TimerTestModeEn 0x01
-#define IEEE_TestCtrlIn_PError		 0x10
-#define IEEE_TestCtrlIn_nFault		 0x08
-#define IEEE_TestCtrlIn_nAck		 0x04
-#define IEEE_TestCtrlIn_PSel		 0x02
-#define IEEE_TestCtrlIn_Busy		 0x01
-
-#endif /* LANGUAGE == C */
-
-/*
- * VGA Controller
- *
- * Registers
- *    VideoControl	Video Control Register
- *    VgaTiming0	VGA Timing Register 0
- *    VgaTiming1	VGA Timing Register 1
- *    VgaTiming2	VGA Timing Register 2
- *    VgaTiming3	VGA Timing Register 3
- *    VgaBorder		VGA Border Color Register
- *    VgaDBAR		VGADMA Base Address Register
- *    VgaDCAR		VGADMA Channel Current Address Register
- *    VgaStatus		VGA Status Register
- *    VgaInterruptMask	VGA Interrupt Mask Register
- *    VgaPalette	VGA Palette Registers
- *    DacControl	DAC Control Register
- *    VgaTest		VGA Controller Test Register
- */
-
-#define _VGA( x )	_SA1101( ( x ) + __VGA_CONTROL )
-
-#define _VideoControl	    _VGA( 0x0000 )
-#define _VgaTiming0	    _VGA( 0x0400 )
-#define _VgaTiming1	    _VGA( 0x0800 )
-#define _VgaTiming2	    _VGA( 0x0c00 )
-#define _VgaTiming3	    _VGA( 0x1000 )
-#define _VgaBorder	    _VGA( 0x1400 )
-#define _VgaDBAR	    _VGA( 0x1800 )
-#define _VgaDCAR	    _VGA( 0x1c00 )
-#define _VgaStatus	    _VGA( 0x2000 )
-#define _VgaInterruptMask   _VGA( 0x2400 )
-#define _VgaPalette	    _VGA( 0x40000 )
-#define _DacControl	    _VGA( 0x3000 )
-#define _VgaTest	    _VGA( 0x2c00 )
-
-#if (LANGUAGE == C)
-#define VideoControl   (*((volatile Word *) SA1101_p2v (_VideoControl)))
-#define VgaTiming0     (*((volatile Word *) SA1101_p2v (_VgaTiming0)))
-#define VgaTiming1     (*((volatile Word *) SA1101_p2v (_VgaTiming1)))
-#define VgaTiming2     (*((volatile Word *) SA1101_p2v (_VgaTiming2)))
-#define VgaTiming3     (*((volatile Word *) SA1101_p2v (_VgaTiming3)))
-#define VgaBorder      (*((volatile Word *) SA1101_p2v (_VgaBorder)))
-#define VgaDBAR	       (*((volatile Word *) SA1101_p2v (_VgaDBAR)))
-#define VgaDCAR	       (*((volatile Word *) SA1101_p2v (_VgaDCAR)))
-#define VgaStatus      (*((volatile Word *) SA1101_p2v (_VgaStatus)))
-#define VgaInterruptMask (*((volatile Word *) SA1101_p2v (_VgaInterruptMask)))
-#define VgaPalette     (*((volatile Word *) SA1101_p2v (_VgaPalette)))
-#define DacControl     (*((volatile Word *) SA1101_p2v (_DacControl)))
-#define VgaTest        (*((volatile Word *) SA1101_p2v (_VgaTest)))
-
-#define VideoControl_VgaEn    0x00000000
-#define VideoControl_BGR      0x00000001
-#define VideoControl_VCompVal Fld(2,2)
-#define VideoControl_VgaReq   Fld(4,4)
-#define VideoControl_VBurstL  Fld(4,8)
-#define VideoControl_VMode    (1<<12)
-#define VideoControl_PalRead  (1<<13)
-
-#define VgaTiming0_PPL	      Fld(6,2)
-#define VgaTiming0_HSW	      Fld(8,8)
-#define VgaTiming0_HFP	      Fld(8,16)
-#define VgaTiming0_HBP	      Fld(8,24)
-
-#define VgaTiming1_LPS	      Fld(10,0)
-#define VgaTiming1_VSW	      Fld(6,10)
-#define VgaTiming1_VFP	      Fld(8,16)
-#define VgaTiming1_VBP	      Fld(8,24)
-
-#define VgaTiming2_IVS	      0x01
-#define VgaTiming2_IHS	      0x02
-#define VgaTiming2_CVS	      0x04
-#define VgaTiming2_CHS	      0x08
-
-#define VgaTiming3_HBS	      Fld(8,0)
-#define VgaTiming3_HBE	      Fld(8,8)
-#define VgaTiming3_VBS	      Fld(8,16)
-#define VgaTiming3_VBE	      Fld(8,24)
-
-#define VgaBorder_BCOL	      Fld(24,0)
-
-#define VgaStatus_VFUF	      0x01
-#define VgaStatus_VNext	      0x02
-#define VgaStatus_VComp	      0x04
-
-#define VgaInterruptMask_VFUFMask   0x00
-#define VgaInterruptMask_VNextMask  0x01
-#define VgaInterruptMask_VCompMask  0x02
-
-#define VgaPalette_R	      Fld(8,0)
-#define VgaPalette_G	      Fld(8,8)
-#define VgaPalette_B	      Fld(8,16)
-
-#define DacControl_DACON      0x0001
-#define DacControl_COMPON     0x0002
-#define DacControl_PEDON      0x0004
-#define DacControl_RTrim      Fld(5,4)
-#define DacControl_GTrim      Fld(5,9)
-#define DacControl_BTrim      Fld(5,14)
-
-#define VgaTest_TDAC	      0x00
-#define VgaTest_Datatest      Fld(4,1)
-#define VgaTest_DACTESTDAC    0x10
-#define VgaTest_DACTESTOUT    Fld(3,5)
-
-#endif /* LANGUAGE == C */
-
-/*
- * USB Host Interface Controller
- *
- * Registers
- *    Revision
- *    Control
- *    CommandStatus
- *    InterruptStatus
- *    InterruptEnable
- *    HCCA
- *    PeriodCurrentED
- *    ControlHeadED
- *    BulkHeadED
- *    BulkCurrentED
- *    DoneHead
- *    FmInterval
- *    FmRemaining
- *    FmNumber
- *    PeriodicStart
- *    LSThreshold
- *    RhDescriptorA
- *    RhDescriptorB
- *    RhStatus
- *    RhPortStatus
- *    USBStatus
- *    USBReset
- *    USTAR
- *    USWER
- *    USRFR
- *    USNFR
- *    USTCSR
- *    USSR
- *    
- */
-
-#define _USB( x )	_SA1101( ( x ) + __USB_CONTROL )
-
-
-#define _Revision	  _USB( 0x0000 )
-#define _Control	  _USB( 0x0888 )
-#define _CommandStatus	  _USB( 0x0c00 )
-#define _InterruptStatus  _USB( 0x1000 )
-#define _InterruptEnable  _USB( 0x1400 )
-#define _HCCA		  _USB( 0x1800 )
-#define _PeriodCurrentED  _USB( 0x1c00 )
-#define _ControlHeadED	  _USB( 0x2000 )
-#define _BulkHeadED	  _USB( 0x2800 )
-#define _BulkCurrentED	  _USB( 0x2c00 )
-#define _DoneHead	  _USB( 0x3000 )
-#define _FmInterval	  _USB( 0x3400 )
-#define _FmRemaining	  _USB( 0x3800 )
-#define _FmNumber	  _USB( 0x3c00 )
-#define _PeriodicStart	  _USB( 0x4000 )
-#define _LSThreshold	  _USB( 0x4400 )
-#define _RhDescriptorA	  _USB( 0x4800 )
-#define _RhDescriptorB	  _USB( 0x4c00 )
-#define _RhStatus	  _USB( 0x5000 )
-#define _RhPortStatus	  _USB( 0x5400 )
-#define _USBStatus	  _USB( 0x11800 )
-#define _USBReset	  _USB( 0x11c00 )
-
-#define _USTAR		  _USB( 0x10400 )
-#define _USWER		  _USB( 0x10800 )
-#define _USRFR		  _USB( 0x10c00 )
-#define _USNFR		  _USB( 0x11000 )
-#define _USTCSR		  _USB( 0x11400 )
-#define _USSR		  _USB( 0x11800 )
-
-
-#if (LANGUAGE == C)
-
-#define Revision	(*((volatile Word *) SA1101_p2v (_Revision)))
-#define Control		(*((volatile Word *) SA1101_p2v (_Control)))
-#define CommandStatus	(*((volatile Word *) SA1101_p2v (_CommandStatus)))
-#define InterruptStatus	(*((volatile Word *) SA1101_p2v (_InterruptStatus)))
-#define InterruptEnable	(*((volatile Word *) SA1101_p2v (_InterruptEnable)))
-#define HCCA		(*((volatile Word *) SA1101_p2v (_HCCA)))
-#define PeriodCurrentED	(*((volatile Word *) SA1101_p2v (_PeriodCurrentED)))
-#define ControlHeadED	(*((volatile Word *) SA1101_p2v (_ControlHeadED)))
-#define BulkHeadED	(*((volatile Word *) SA1101_p2v (_BulkHeadED)))
-#define BulkCurrentED	(*((volatile Word *) SA1101_p2v (_BulkCurrentED)))
-#define DoneHead	(*((volatile Word *) SA1101_p2v (_DoneHead)))
-#define FmInterval	(*((volatile Word *) SA1101_p2v (_FmInterval)))
-#define FmRemaining	(*((volatile Word *) SA1101_p2v (_FmRemaining)))
-#define FmNumber	(*((volatile Word *) SA1101_p2v (_FmNumber)))
-#define PeriodicStart	(*((volatile Word *) SA1101_p2v (_PeriodicStart)))
-#define LSThreshold	(*((volatile Word *) SA1101_p2v (_LSThreshold)))
-#define RhDescriptorA	(*((volatile Word *) SA1101_p2v (_RhDescriptorA)))
-#define RhDescriptorB	(*((volatile Word *) SA1101_p2v (_RhDescriptorB)))
-#define RhStatus	(*((volatile Word *) SA1101_p2v (_RhStatus)))
-#define RhPortStatus	(*((volatile Word *) SA1101_p2v (_RhPortStatus)))
-#define USBStatus	(*((volatile Word *) SA1101_p2v (_USBStatus)))
-#define USBReset	(*((volatile Word *) SA1101_p2v (_USBReset)))
-#define USTAR		(*((volatile Word *) SA1101_p2v (_USTAR)))
-#define USWER		(*((volatile Word *) SA1101_p2v (_USWER)))
-#define USRFR		(*((volatile Word *) SA1101_p2v (_USRFR)))
-#define USNFR		(*((volatile Word *) SA1101_p2v (_USNFR)))
-#define USTCSR		(*((volatile Word *) SA1101_p2v (_USTCSR)))
-#define USSR		(*((volatile Word *) SA1101_p2v (_USSR)))
-
-
-#define USBStatus_IrqHciRmtWkp	     (1<<7)
-#define USBStatus_IrqHciBuffAcc	     (1<<8)
-#define USBStatus_nIrqHciM	     (1<<9)
-#define USBStatus_nHciMFClr	     (1<<10)
-
-#define USBReset_ForceIfReset	     0x01
-#define USBReset_ForceHcReset	     0x02
-#define USBReset_ClkGenReset	     0x04
-
-#define USTCR_RdBstCntrl	     Fld(3,0)
-#define USTCR_ByteEnable	     Fld(4,3)
-#define USTCR_WriteEn		     (1<<7)
-#define USTCR_FifoCir		     (1<<8)
-#define USTCR_TestXferSel	     (1<<9)
-#define USTCR_FifoCirAtEnd	     (1<<10)
-#define USTCR_nSimScaleDownClk	     (1<<11)
-
-#define USSR_nAppMDEmpty	     0x01
-#define USSR_nAppMDFirst	     0x02
-#define USSR_nAppMDLast		     0x04
-#define USSR_nAppMDFull		     0x08
-#define USSR_nAppMAFull		     0x10
-#define USSR_XferReq		     0x20
-#define USSR_XferEnd		     0x40
-
-#endif /* LANGUAGE == C */
-
-
-/*
- * Interrupt Controller
- *
- * Registers
- *    INTTEST0		Test register 0
- *    INTTEST1		Test register 1
- *    INTENABLE0	Interrupt Enable register 0
- *    INTENABLE1	Interrupt Enable register 1
- *    INTPOL0		Interrupt Polarity selection 0
- *    INTPOL1		Interrupt Polarity selection 1
- *    INTTSTSEL		Interrupt source selection
- *    INTSTATCLR0	Interrupt Status 0
- *    INTSTATCLR1	Interrupt Status 1
- *    INTSET0		Interrupt Set 0
- *    INTSET1		Interrupt Set 1
- */
-
-#define _INT( x )	_SA1101( ( x ) + __INTERRUPT_CONTROL)
-
-#define _INTTEST0	_INT( 0x1000 )
-#define _INTTEST1	_INT( 0x1400 )
-#define _INTENABLE0	_INT( 0x2000 )
-#define _INTENABLE1	_INT( 0x2400 )
-#define _INTPOL0	_INT( 0x3000 )
-#define _INTPOL1	_INT( 0x3400 )
-#define _INTTSTSEL     	_INT( 0x5000 )
-#define _INTSTATCLR0	_INT( 0x6000 )
-#define _INTSTATCLR1	_INT( 0x6400 )
-#define _INTSET0	_INT( 0x7000 )
-#define _INTSET1	_INT( 0x7400 )
-
-#if ( LANGUAGE == C )
-#define INTTEST0	(*((volatile Word *) SA1101_p2v (_INTTEST0)))
-#define INTTEST1	(*((volatile Word *) SA1101_p2v (_INTTEST1)))
-#define INTENABLE0	(*((volatile Word *) SA1101_p2v (_INTENABLE0)))
-#define INTENABLE1	(*((volatile Word *) SA1101_p2v (_INTENABLE1)))
-#define INTPOL0		(*((volatile Word *) SA1101_p2v (_INTPOL0)))
-#define INTPOL1		(*((volatile Word *) SA1101_p2v (_INTPOL1)))
-#define INTTSTSEL	(*((volatile Word *) SA1101_p2v (_INTTSTSEL)))
-#define INTSTATCLR0	(*((volatile Word *) SA1101_p2v (_INTSTATCLR0)))
-#define INTSTATCLR1	(*((volatile Word *) SA1101_p2v (_INTSTATCLR1)))
-#define INTSET0		(*((volatile Word *) SA1101_p2v (_INTSET0)))
-#define INTSET1		(*((volatile Word *) SA1101_p2v (_INTSET1)))
-
-#endif /* LANGUAGE == C */
-
-/*
- * PS/2 Trackpad and Mouse Interfaces
- *
- * Registers   (prefix kbd applies to trackpad interface, mse to mouse)
- *    KBDCR		Control Register
- *    KBDSTAT		Status Register
- *    KBDDATA		Transmit/Receive Data register
- *    KBDCLKDIV		Clock Division Register
- *    KBDPRECNT		Clock Precount Register
- *    KBDTEST1		Test register 1
- *    KBDTEST2		Test register 2
- *    KBDTEST3		Test register 3
- *    KBDTEST4		Test register 4
- *    MSECR	
- *    MSESTAT
- *    MSEDATA
- *    MSECLKDIV
- *    MSEPRECNT
- *    MSETEST1
- *    MSETEST2
- *    MSETEST3
- *    MSETEST4
- *     
- */
-
-#define _KBD( x )	_SA1101( ( x ) + __TRACK_INTERFACE )
-#define _MSE( x )	_SA1101( ( x ) + __MOUSE_INTERFACE )
-
-#define _KBDCR		_KBD( 0x0000 )
-#define _KBDSTAT	_KBD( 0x0400 )
-#define _KBDDATA	_KBD( 0x0800 )
-#define _KBDCLKDIV	_KBD( 0x0c00 )
-#define _KBDPRECNT	_KBD( 0x1000 )
-#define	_KBDTEST1	_KBD( 0x2000 )
-#define _KBDTEST2	_KBD( 0x2400 )
-#define _KBDTEST3	_KBD( 0x2800 )
-#define _KBDTEST4	_KBD( 0x2c00 )
-#define _MSECR		_MSE( 0x0000 )
-#define _MSESTAT	_MSE( 0x0400 )
-#define _MSEDATA	_MSE( 0x0800 )
-#define _MSECLKDIV	_MSE( 0x0c00 )
-#define _MSEPRECNT	_MSE( 0x1000 )
-#define	_MSETEST1	_MSE( 0x2000 )
-#define _MSETEST2	_MSE( 0x2400 )
-#define _MSETEST3	_MSE( 0x2800 )
-#define _MSETEST4	_MSE( 0x2c00 )
-
-#if ( LANGUAGE == C )
-
-#define KBDCR	    (*((volatile Word *) SA1101_p2v (_KBDCR)))
-#define KBDSTAT	    (*((volatile Word *) SA1101_p2v (_KBDSTAT)))
-#define KBDDATA	    (*((volatile Word *) SA1101_p2v (_KBDDATA)))
-#define KBDCLKDIV   (*((volatile Word *) SA1101_p2v (_KBDCLKDIV)))
-#define KBDPRECNT   (*((volatile Word *) SA1101_p2v (_KBDPRECNT)))
-#define KBDTEST1    (*((volatile Word *) SA1101_p2v (_KBDTEST1)))
-#define KBDTEST2    (*((volatile Word *) SA1101_p2v (_KBDTEST2)))
-#define KBDTEST3    (*((volatile Word *) SA1101_p2v (_KBDTEST3)))
-#define KBDTEST4    (*((volatile Word *) SA1101_p2v (_KBDTEST4)))
-#define MSECR	    (*((volatile Word *) SA1101_p2v (_MSECR)))
-#define MSESTAT	    (*((volatile Word *) SA1101_p2v (_MSESTAT)))
-#define MSEDATA	    (*((volatile Word *) SA1101_p2v (_MSEDATA)))
-#define MSECLKDIV   (*((volatile Word *) SA1101_p2v (_MSECLKDIV)))
-#define MSEPRECNT   (*((volatile Word *) SA1101_p2v (_MSEPRECNT)))
-#define MSETEST1    (*((volatile Word *) SA1101_p2v (_MSETEST1)))
-#define MSETEST2    (*((volatile Word *) SA1101_p2v (_MSETEST2)))
-#define MSETEST3    (*((volatile Word *) SA1101_p2v (_MSETEST3)))
-#define MSETEST4    (*((volatile Word *) SA1101_p2v (_MSETEST4)))
-
-
-#define KBDCR_ENA		 0x08
-#define KBDCR_FKD		 0x02
-#define KBDCR_FKC		 0x01
-
-#define KBDSTAT_TXE		 0x80
-#define KBDSTAT_TXB		 0x40
-#define KBDSTAT_RXF		 0x20
-#define KBDSTAT_RXB		 0x10
-#define KBDSTAT_ENA		 0x08
-#define KBDSTAT_RXP		 0x04
-#define KBDSTAT_KBD		 0x02
-#define KBDSTAT_KBC		 0x01
-
-#define KBDCLKDIV_DivVal	 Fld(4,0)
-
-#define MSECR_ENA		 0x08
-#define MSECR_FKD		 0x02
-#define MSECR_FKC		 0x01
-
-#define MSESTAT_TXE		 0x80
-#define MSESTAT_TXB		 0x40
-#define MSESTAT_RXF		 0x20
-#define MSESTAT_RXB		 0x10
-#define MSESTAT_ENA		 0x08
-#define MSESTAT_RXP		 0x04	
-#define MSESTAT_MSD		 0x02
-#define MSESTAT_MSC		 0x01
-
-#define MSECLKDIV_DivVal	 Fld(4,0)
-
-#define KBDTEST1_CD		 0x80
-#define KBDTEST1_RC1		 0x40
-#define KBDTEST1_MC		 0x20
-#define KBDTEST1_C		 Fld(2,3)
-#define KBDTEST1_T2		 0x40
-#define KBDTEST1_T1		 0x20
-#define KBDTEST1_T0		 0x10
-#define KBDTEST2_TICBnRES	 0x08
-#define KBDTEST2_RKC		 0x04
-#define KBDTEST2_RKD		 0x02
-#define KBDTEST2_SEL		 0x01
-#define KBDTEST3_ms_16		 0x80
-#define KBDTEST3_us_64		 0x40
-#define KBDTEST3_us_16		 0x20
-#define KBDTEST3_DIV8		 0x10
-#define KBDTEST3_DIn		 0x08
-#define KBDTEST3_CIn		 0x04
-#define KBDTEST3_KD		 0x02
-#define KBDTEST3_KC		 0x01
-#define KBDTEST4_BC12		 0x80
-#define KBDTEST4_BC11		 0x40
-#define KBDTEST4_TRES		 0x20
-#define KBDTEST4_CLKOE		 0x10
-#define KBDTEST4_CRES		 0x08
-#define KBDTEST4_RXB		 0x04
-#define KBDTEST4_TXB		 0x02
-#define KBDTEST4_SRX		 0x01
-
-#define MSETEST1_CD		 0x80
-#define MSETEST1_RC1		 0x40
-#define MSETEST1_MC		 0x20
-#define MSETEST1_C		 Fld(2,3)
-#define MSETEST1_T2		 0x40
-#define MSETEST1_T1		 0x20
-#define MSETEST1_T0		 0x10
-#define MSETEST2_TICBnRES	 0x08
-#define MSETEST2_RKC		 0x04
-#define MSETEST2_RKD		 0x02
-#define MSETEST2_SEL		 0x01
-#define MSETEST3_ms_16		 0x80
-#define MSETEST3_us_64		 0x40
-#define MSETEST3_us_16		 0x20
-#define MSETEST3_DIV8		 0x10
-#define MSETEST3_DIn		 0x08
-#define MSETEST3_CIn		 0x04
-#define MSETEST3_KD		 0x02
-#define MSETEST3_KC		 0x01
-#define MSETEST4_BC12		 0x80
-#define MSETEST4_BC11		 0x40
-#define MSETEST4_TRES		 0x20
-#define MSETEST4_CLKOE		 0x10
-#define MSETEST4_CRES		 0x08
-#define MSETEST4_RXB		 0x04
-#define MSETEST4_TXB		 0x02
-#define MSETEST4_SRX		 0x01
-
-#endif  /* LANGUAGE == C */
-
-
-/*
- * General-Purpose I/O Interface
- *
- * Registers
- *    PADWR	Port A Data Write Register
- *    PBDWR	Port B Data Write Register
- *    PADRR	Port A Data Read Register
- *    PBDRR	Port B Data Read Register
- *    PADDR	Port A Data Direction Register
- *    PBDDR	Port B Data Direction Register
- *    PASSR	Port A Sleep State Register
- *    PBSSR	Port B Sleep State Register
- *
- */
-
-#define _PIO( x )      _SA1101( ( x ) + __GPIO_INTERFACE )
-
-#define _PADWR	       _PIO( 0x0000 )
-#define _PBDWR	       _PIO( 0x0400 )
-#define _PADRR	       _PIO( 0x0000 )
-#define _PBDRR	       _PIO( 0x0400 )
-#define _PADDR	       _PIO( 0x0800 )
-#define _PBDDR	       _PIO( 0x0c00 )
-#define _PASSR	       _PIO( 0x1000 )
-#define _PBSSR	       _PIO( 0x1400 )
-
-
-#if ( LANGUAGE == C )
-
-
-#define PADWR	    (*((volatile Word *) SA1101_p2v (_PADWR)))
-#define PBDWR	    (*((volatile Word *) SA1101_p2v (_PBDWR)))
-#define PADRR	    (*((volatile Word *) SA1101_p2v (_PADRR)))
-#define PBDRR	    (*((volatile Word *) SA1101_p2v (_PBDRR)))
-#define PADDR	    (*((volatile Word *) SA1101_p2v (_PADDR)))
-#define PBDDR	    (*((volatile Word *) SA1101_p2v (_PBDDR)))
-#define PASSR	    (*((volatile Word *) SA1101_p2v (_PASSR)))
-#define PBSSR	    (*((volatile Word *) SA1101_p2v (_PBSSR)))
-
-#endif
-
-
-
-/*
- * Keypad Interface
- *
- * Registers
- *    PXDWR
- *    PXDRR
- *    PYDWR
- *    PYDRR
- *
- */
-
-#define _KEYPAD( x )	_SA1101( ( x ) + __KEYPAD_INTERFACE ) 
-
-#define _PXDWR	   _KEYPAD( 0x0000 )
-#define _PXDRR	   _KEYPAD( 0x0000 )
-#define _PYDWR	   _KEYPAD( 0x0400 )
-#define _PYDRR	   _KEYPAD( 0x0400 )
-
-#if ( LANGUAGE == C )
-
-
-#define PXDWR	    (*((volatile Word *) SA1101_p2v (_PXDWR)))
-#define PXDRR	    (*((volatile Word *) SA1101_p2v (_PXDRR)))
-#define PYDWR	    (*((volatile Word *) SA1101_p2v (_PYDWR)))
-#define PYDRR	    (*((volatile Word *) SA1101_p2v (_PYDRR)))
-
-#endif
-
-
-
-/*
- * PCMCIA Interface
- *
- * Registers
- *    PCSR	Status Register
- *    PCCR	Control Register
- *    PCSSR	Sleep State Register
- *
- */
-
-#define _CARD( x )	_SA1101( ( x ) + __PCMCIA_INTERFACE )
-
-#define _PCSR	   _CARD( 0x0000 )
-#define _PCCR	   _CARD( 0x0400 )
-#define _PCSSR	   _CARD( 0x0800 )
-
-#if ( LANGUAGE == C )
-#define PCSR    (*((volatile Word *) SA1101_p2v (_PCSR)))
-#define PCCR	(*((volatile Word *) SA1101_p2v (_PCCR)))
-#define PCSSR	(*((volatile Word *) SA1101_p2v (_PCSSR)))
-
-#define PCSR_S0_ready		0x0001
-#define PCSR_S1_ready		0x0002
-#define PCSR_S0_detected	0x0004
-#define PCSR_S1_detected	0x0008
-#define PCSR_S0_VS1		0x0010
-#define PCSR_S0_VS2		0x0020
-#define PCSR_S1_VS1		0x0040
-#define PCSR_S1_VS2		0x0080
-#define PCSR_S0_WP		0x0100
-#define PCSR_S1_WP		0x0200
-#define PCSR_S0_BVD1_nSTSCHG	0x0400
-#define PCSR_S0_BVD2_nSPKR	0x0800
-#define PCSR_S1_BVD1_nSTSCHG	0x1000
-#define PCSR_S1_BVD2_nSPKR	0x2000
-
-#define PCCR_S0_VPP0		0x0001
-#define PCCR_S0_VPP1		0x0002
-#define PCCR_S0_VCC0		0x0004
-#define PCCR_S0_VCC1		0x0008
-#define PCCR_S1_VPP0		0x0010
-#define PCCR_S1_VPP1		0x0020
-#define PCCR_S1_VCC0		0x0040
-#define PCCR_S1_VCC1		0x0080
-#define PCCR_S0_reset		0x0100
-#define PCCR_S1_reset		0x0200
-#define PCCR_S0_float		0x0400
-#define PCCR_S1_float		0x0800
-
-#define PCSSR_S0_VCC0		0x0001
-#define PCSSR_S0_VCC1		0x0002
-#define PCSSR_S0_VPP0		0x0004
-#define PCSSR_S0_VPP1		0x0008
-#define PCSSR_S0_control	0x0010
-#define PCSSR_S1_VCC0		0x0020
-#define PCSSR_S1_VCC1		0x0040
-#define PCSSR_S1_VPP0		0x0080
-#define PCSSR_S1_VPP1		0x0100
-#define PCSSR_S1_control	0x0200
-
-#endif
-
-#undef C
-#undef Assembly
diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h
index cbedd75a9d65..4393634af25e 100644
--- a/arch/arm/mach-sa1100/include/mach/hardware.h
+++ b/arch/arm/mach-sa1100/include/mach/hardware.h
@@ -74,8 +74,4 @@ static inline unsigned long get_clock_tick_rate(void)
 
 #include "SA-1100.h"
 
-#ifdef CONFIG_SA1101
-#include "SA-1101.h"
-#endif
-
 #endif  /* _ASM_ARCH_HARDWARE_H */
-- 
1.9.0