All of lore.kernel.org
 help / color / mirror / Atom feed
From: YoungJun Cho <yj44.cho@samsung.com>
To: airlied@linux.ie, dri-devel@lists.freedesktop.org
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, pawel.moll@arm.com,
	ijc+devicetree@hellion.org.uk, sw0312.kim@samsung.com,
	a.hajda@samsung.com, kyungmin.park@samsung.com,
	robh+dt@kernel.org, galak@codeaurora.org, kgene.kim@samsung.com
Subject: [PATCH v4 10/14] drm/panel: add S6E3FA0 driver
Date: Thu, 05 Jun 2014 15:19:50 +0900	[thread overview]
Message-ID: <1401949194-20092-11-git-send-email-yj44.cho@samsung.com> (raw)
In-Reply-To: <1401949194-20092-1-git-send-email-yj44.cho@samsung.com>

This patch adds MIPI DSI command mode based
S6E3FA0 AMOLED LCD Panel driver.

Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 drivers/gpu/drm/panel/Kconfig         |    7 +
 drivers/gpu/drm/panel/Makefile        |    1 +
 drivers/gpu/drm/panel/panel-s6e3fa0.c |  568 +++++++++++++++++++++++++++++++++
 3 files changed, 576 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-s6e3fa0.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index 4ec874d..be1392e 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -30,4 +30,11 @@ config DRM_PANEL_S6E8AA0
 	select DRM_MIPI_DSI
 	select VIDEOMODE_HELPERS
 
+config DRM_PANEL_S6E3FA0
+	tristate "S6E3FA0 DSI command mode panel"
+	depends on DRM && DRM_PANEL
+	depends on OF
+	select DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
 endmenu
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index 8b92921..85c6738 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
 obj-$(CONFIG_DRM_PANEL_LD9040) += panel-ld9040.o
 obj-$(CONFIG_DRM_PANEL_S6E8AA0) += panel-s6e8aa0.o
+obj-$(CONFIG_DRM_PANEL_S6E3FA0) += panel-s6e3fa0.o
diff --git a/drivers/gpu/drm/panel/panel-s6e3fa0.c b/drivers/gpu/drm/panel/panel-s6e3fa0.c
new file mode 100644
index 0000000..5373ba7
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-s6e3fa0.c
@@ -0,0 +1,568 @@
+/*
+ * MIPI DSI command mode based s6e3fa0 AMOLED LCD 5.7 inch drm panel driver.
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ *
+ * YoungJun Cho <yj44.cho@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <drm/drmP.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+/* Manufacturer Command Set */
+#define MCS_GLOBAL_PARAMETER	0xb0
+#define MCS_AID			0xb2
+#define MCS_ELVSSOPT		0xb6
+#define MCS_TEMPERATURE_SET	0xb8
+#define MCS_PENTILE_CTRL	0xc0
+#define MCS_GAMMA_MODE		0xca
+#define MCS_VDDM		0xd7
+#define MCS_ALS			0xe3
+#define MCS_ERR_FG		0xed
+#define MCS_KEY_LEV1		0xf0
+#define MCS_PANEL_UPDATE	0xf7
+#define MCS_KEY_LEV2		0xfc
+#define MCS_RE			0xfe
+#define MCS_TOUT2_HSYNC		0xff
+
+/* Content Adaptive Brightness Control */
+#define DCS_WRITE_CABC		0x55
+
+#define MTP_ID_LEN		3
+#define GAMMA_LEVEL_NUM		30
+
+#define DEFAULT_VDDM_VAL	0x15
+
+struct s6e3fa0 {
+	struct device				*dev;
+	struct drm_panel			panel;
+
+	struct regulator_bulk_data		supplies[2];
+	struct gpio_desc			*reset_gpio;
+	struct gpio_desc			*det_gpio;
+	struct gpio_desc			*te_gpio;
+	struct videomode			vm;
+
+	unsigned int				power_on_delay;
+	unsigned int				reset_delay;
+	unsigned int				init_delay;
+	unsigned int				width_mm;
+	unsigned int				height_mm;
+
+	unsigned char				id;
+	unsigned char				vddm;
+	unsigned int				brightness;
+};
+
+#define panel_to_s6e3fa0(p) container_of(p, struct s6e3fa0, panel)
+
+/* VDD Memory Lookup Table contains pairs of {ReadValue, WriteValue} */
+static const unsigned char s6e3fa0_vddm_lut[][2] = {
+	{0x00, 0x0d}, {0x01, 0x0d}, {0x02, 0x0e}, {0x03, 0x0f}, {0x04, 0x10},
+	{0x05, 0x11}, {0x06, 0x12}, {0x07, 0x13}, {0x08, 0x14}, {0x09, 0x15},
+	{0x0a, 0x16}, {0x0b, 0x17}, {0x0c, 0x18}, {0x0d, 0x19}, {0x0e, 0x1a},
+	{0x0f, 0x1b}, {0x10, 0x1c}, {0x11, 0x1d}, {0x12, 0x1e}, {0x13, 0x1f},
+	{0x14, 0x20}, {0x15, 0x21}, {0x16, 0x22}, {0x17, 0x23}, {0x18, 0x24},
+	{0x19, 0x25}, {0x1a, 0x26}, {0x1b, 0x27}, {0x1c, 0x28}, {0x1d, 0x29},
+	{0x1e, 0x2a}, {0x1f, 0x2b}, {0x20, 0x2c}, {0x21, 0x2d}, {0x22, 0x2e},
+	{0x23, 0x2f}, {0x24, 0x30}, {0x25, 0x31}, {0x26, 0x32}, {0x27, 0x33},
+	{0x28, 0x34}, {0x29, 0x35}, {0x2a, 0x36}, {0x2b, 0x37}, {0x2c, 0x38},
+	{0x2d, 0x39}, {0x2e, 0x3a}, {0x2f, 0x3b}, {0x30, 0x3c}, {0x31, 0x3d},
+	{0x32, 0x3e}, {0x33, 0x3f}, {0x34, 0x3f}, {0x35, 0x3f}, {0x36, 0x3f},
+	{0x37, 0x3f}, {0x38, 0x3f}, {0x39, 0x3f}, {0x3a, 0x3f}, {0x3b, 0x3f},
+	{0x3c, 0x3f}, {0x3d, 0x3f}, {0x3e, 0x3f}, {0x3f, 0x3f}, {0x40, 0x0c},
+	{0x41, 0x0b}, {0x42, 0x0a}, {0x43, 0x09}, {0x44, 0x08}, {0x45, 0x07},
+	{0x46, 0x06}, {0x47, 0x05}, {0x48, 0x04}, {0x49, 0x03}, {0x4a, 0x02},
+	{0x4b, 0x01}, {0x4c, 0x40}, {0x4d, 0x41}, {0x4e, 0x42}, {0x4f, 0x43},
+	{0x50, 0x44}, {0x51, 0x45}, {0x52, 0x46}, {0x53, 0x47}, {0x54, 0x48},
+	{0x55, 0x49}, {0x56, 0x4a}, {0x57, 0x4b}, {0x58, 0x4c}, {0x59, 0x4d},
+	{0x5a, 0x4e}, {0x5b, 0x4f}, {0x5c, 0x50}, {0x5d, 0x51}, {0x5e, 0x52},
+	{0x5f, 0x53}, {0x60, 0x54}, {0x61, 0x55}, {0x62, 0x56}, {0x63, 0x57},
+	{0x64, 0x58}, {0x65, 0x59}, {0x66, 0x5a}, {0x67, 0x5b}, {0x68, 0x5c},
+	{0x69, 0x5d}, {0x6a, 0x5e}, {0x6b, 0x5f}, {0x6c, 0x60}, {0x6d, 0x61},
+	{0x6e, 0x62}, {0x6f, 0x63}, {0x70, 0x64}, {0x71, 0x65}, {0x72, 0x66},
+	{0x73, 0x67}, {0x74, 0x68}, {0x75, 0x69}, {0x76, 0x6a}, {0x77, 0x6b},
+	{0x78, 0x6c}, {0x79, 0x6d}, {0x7a, 0x6e}, {0x7b, 0x6f}, {0x7c, 0x70},
+	{0x7d, 0x71}, {0x7e, 0x72}, {0x7f, 0x73},
+};
+
+static int s6e3fa0_dcs_read(struct s6e3fa0 *ctx, unsigned char cmd,
+							void *data, size_t len)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	return mipi_dsi_dcs_read(dsi, dsi->channel, cmd, data, len);
+}
+
+static void s6e3fa0_dcs_write(struct s6e3fa0 *ctx, const void *data, size_t len)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+
+	mipi_dsi_dcs_write(dsi, dsi->channel, data, len);
+}
+
+#define s6e3fa0_dcs_write_seq(ctx, seq...)				\
+do {									\
+	const unsigned char d[] = { seq };				\
+	BUILD_BUG_ON_MSG(ARRAY_SIZE(d) > 64, "too big seq for stack");	\
+	s6e3fa0_dcs_write(ctx, d, ARRAY_SIZE(d));			\
+} while (0)
+
+#define s6e3fa0_dcs_write_seq_static(ctx, seq...)			\
+do {									\
+	static const unsigned char d[] = { seq };			\
+	s6e3fa0_dcs_write(ctx, d, ARRAY_SIZE(d));			\
+} while (0)
+
+static void s6e3fa0_apply_level_1_key(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, MCS_KEY_LEV1, 0x5a, 0x5a);
+}
+
+static void s6e3fa0_apply_level_2_key(struct s6e3fa0 *ctx, bool on)
+{
+	if (on)
+		s6e3fa0_dcs_write_seq_static(ctx, MCS_KEY_LEV2, 0x5a, 0x5a);
+	else
+		s6e3fa0_dcs_write_seq_static(ctx, MCS_KEY_LEV2, 0xa5, 0xa5);
+}
+
+static void s6e3fa0_set_maximum_return_packet_size(struct s6e3fa0 *ctx,
+							unsigned int size)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	const struct mipi_dsi_host_ops *ops = dsi->host->ops;
+
+	if (ops && ops->transfer) {
+		unsigned char buf[] = {size, 0};
+		struct mipi_dsi_msg msg = {
+			.channel = dsi->channel,
+			.type = MIPI_DSI_SET_MAXIMUM_RETURN_PACKET_SIZE,
+			.tx_len = sizeof(buf),
+			.tx_buf = buf
+		};
+
+		ops->transfer(dsi->host, &msg);
+	}
+}
+
+static void s6e3fa0_read_mtp_id(struct s6e3fa0 *ctx)
+{
+	unsigned char id[MTP_ID_LEN];
+	int ret;
+
+	s6e3fa0_set_maximum_return_packet_size(ctx, MTP_ID_LEN);
+	ret = s6e3fa0_dcs_read(ctx, MIPI_DCS_GET_DISPLAY_ID, id, MTP_ID_LEN);
+	if (ret < MTP_ID_LEN || id[0] == 0x00) {
+		dev_err(ctx->dev, "failed to read id\n");
+		return;
+	}
+
+	dev_info(ctx->dev, "ID: 0x%02x, 0x%02x, 0x%02x\n", id[0], id[1], id[2]);
+
+	ctx->id = id[2];
+}
+
+static void s6e3fa0_read_vddm(struct s6e3fa0 *ctx)
+{
+	unsigned char vddm;
+	int ret;
+
+	s6e3fa0_apply_level_2_key(ctx, true);
+	s6e3fa0_dcs_write_seq_static(ctx, MCS_GLOBAL_PARAMETER, 0x16);
+	s6e3fa0_set_maximum_return_packet_size(ctx, 1);
+	ret = s6e3fa0_dcs_read(ctx, MCS_VDDM, &vddm, 1);
+	s6e3fa0_apply_level_2_key(ctx, false);
+
+	if (ret < 1 || vddm > 0x7f) {
+		dev_err(ctx->dev, "failed to read vddm, use default val.\n");
+		vddm = DEFAULT_VDDM_VAL;
+	}
+
+	ctx->vddm = s6e3fa0_vddm_lut[vddm][1];
+}
+
+static void s6e3fa0_set_pentile_control(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, MCS_PENTILE_CTRL, 0x00, 0x02, 0x03,
+					0x32, 0x03, 0x44, 0x44, 0xc0, 0x00,
+					0x1c, 0x20, 0xe8);
+}
+
+static void s6e3fa0_write_ambient_light_sensor(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, MCS_ALS, 0xff, 0xff, 0xff, 0xff);
+}
+
+static void s6e3fa0_set_readability_enhancement(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, MCS_RE, 0x00, 0x03,
+					MCS_GLOBAL_PARAMETER, 0x2b,
+					MCS_RE, 0xe4);
+}
+
+static void s6e3fa0_set_common_control(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_set_pentile_control(ctx);
+	s6e3fa0_write_ambient_light_sensor(ctx);
+	s6e3fa0_set_readability_enhancement(ctx);
+}
+
+static void s6e3fa0_set_gamma(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, MCS_GAMMA_MODE, 0x01, 0x00, 0x01,
+					0x00, 0x01, 0x00, 0x80, 0x80, 0x80,
+					0x80, 0x80, 0x00, 0x80, 0x80, 0x80,
+					0x80, 0x80, 0x00, 0x80, 0x80, 0x80,
+					0x80, 0x80, 0x00, 0x80, 0x80, 0x80,
+					0x80, 0x80, 0x00, 0x00, 0x00);
+}
+
+static void s6e3fa0_set_amoled_impulse_driving(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, MCS_AID, 0x00, 0x06, 0x00, 0x06);
+}
+
+static void s6e3fa0_set_elvss(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, MCS_ELVSSOPT, 0x88, 0x0a);
+}
+
+static void s6e3fa0_update_panel(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, MCS_PANEL_UPDATE, 0x03);
+}
+
+static void s6e3fa0_write_automatic_current_limit(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, DCS_WRITE_CABC, 0x02);
+}
+
+static void s6e3fa0_set_brightness_control(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_set_gamma(ctx);
+	s6e3fa0_set_amoled_impulse_driving(ctx);
+	s6e3fa0_set_elvss(ctx);
+	s6e3fa0_update_panel(ctx);
+	s6e3fa0_write_automatic_current_limit(ctx);
+}
+
+static void s6e3fa0_set_temperature(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, MCS_GLOBAL_PARAMETER, 0x05,
+					MCS_TEMPERATURE_SET, 0x19);
+}
+
+static void s6e3fa0_set_elvss_control(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_set_temperature(ctx);
+	s6e3fa0_set_elvss(ctx);
+}
+
+static void s6e3fa0_set_te_on(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_SET_TEAR_ON, 0x00);
+}
+
+static void s6e3fa0_set_etc_and_write_vddm(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_apply_level_2_key(ctx, true);
+	s6e3fa0_dcs_write_seq(ctx, MCS_ERR_FG, 0x0c, 0x04,
+				MCS_TOUT2_HSYNC, 0x01,
+				MCS_GLOBAL_PARAMETER, 0x16,
+				MCS_VDDM, ctx->vddm);
+	s6e3fa0_apply_level_2_key(ctx, false);
+}
+
+static void s6e3fa0_set_etc_condition(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_set_te_on(ctx);
+	s6e3fa0_set_etc_and_write_vddm(ctx);
+}
+
+static void s6e3fa0_panel_init(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_set_common_control(ctx);
+	s6e3fa0_set_brightness_control(ctx);
+	s6e3fa0_set_elvss_control(ctx);
+	s6e3fa0_set_etc_condition(ctx);
+
+	msleep(ctx->init_delay);
+}
+
+static int s6e3fa0_power_off(struct s6e3fa0 *ctx)
+{
+	gpiod_set_value(ctx->reset_gpio, 0);
+
+	return regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+}
+
+static int s6e3fa0_power_on(struct s6e3fa0 *ctx)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
+	if (ret)
+		return ret;
+
+	msleep(ctx->power_on_delay);
+
+	gpiod_set_value(ctx->reset_gpio, 1);
+	gpiod_set_value(ctx->reset_gpio, 0);
+	usleep_range(1000, 2000);
+	gpiod_set_value(ctx->reset_gpio, 1);
+
+	msleep(ctx->reset_delay);
+
+	return 0;
+}
+
+static void s6e3fa0_set_sequence(struct s6e3fa0 *ctx)
+{
+	s6e3fa0_apply_level_1_key(ctx);
+	s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_EXIT_SLEEP_MODE);
+	msleep(20);
+
+	s6e3fa0_read_mtp_id(ctx);
+	s6e3fa0_read_vddm(ctx);
+
+	s6e3fa0_panel_init(ctx);
+
+	s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_ON);
+}
+
+static int s6e3fa0_disable(struct drm_panel *panel)
+{
+	struct s6e3fa0 *ctx = panel_to_s6e3fa0(panel);
+
+	s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_ENTER_SLEEP_MODE);
+	s6e3fa0_dcs_write_seq_static(ctx, MIPI_DCS_SET_DISPLAY_OFF);
+	msleep(35);
+
+	return s6e3fa0_power_off(ctx);
+}
+
+static int s6e3fa0_enable(struct drm_panel *panel)
+{
+	struct s6e3fa0 *ctx = panel_to_s6e3fa0(panel);
+	int ret;
+
+	ret = s6e3fa0_power_on(ctx);
+	if (ret)
+		return ret;
+
+	s6e3fa0_set_sequence(ctx);
+
+	return ret;
+}
+
+static int s6e3fa0_get_modes(struct drm_panel *panel)
+{
+	struct drm_connector *connector = panel->connector;
+	struct s6e3fa0 *ctx = panel_to_s6e3fa0(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_create(connector->dev);
+	if (!mode) {
+		DRM_ERROR("failed to create a new display mode\n");
+		return 0;
+	}
+
+	drm_display_mode_from_videomode(&ctx->vm, mode);
+	mode->width_mm = ctx->width_mm;
+	mode->height_mm = ctx->height_mm;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_probed_add(connector, mode);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs s6e3fa0_drm_funcs = {
+	.disable	= s6e3fa0_disable,
+	.enable		= s6e3fa0_enable,
+	.get_modes	= s6e3fa0_get_modes,
+};
+
+static int s6e3fa0_parse_dt(struct s6e3fa0 *ctx)
+{
+	struct device *dev = ctx->dev;
+	int ret;
+
+	ret = of_get_videomode(dev->of_node, &ctx->vm, 0);
+	if (ret) {
+		dev_err(dev, "failed to get video mode: %d\n", ret);
+		return ret;
+	}
+
+	return ret;
+}
+
+irqreturn_t s6e3fa0_det_interrupt(int irq, void *dev_id)
+{
+	/* TODO */
+	return IRQ_HANDLED;
+}
+
+irqreturn_t s6e3fa0_te_interrupt(int irq, void *dev_id)
+{
+	struct s6e3fa0 *ctx = dev_id;
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	struct mipi_dsi_host *host = dsi->host;
+	const struct mipi_dsi_host_ops *ops = host->ops;
+
+	if (ops && ops->te_handler)
+		ops->te_handler(host);
+
+	return IRQ_HANDLED;
+}
+
+static int s6e3fa0_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct s6e3fa0 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(struct s6e3fa0), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+
+	ret = s6e3fa0_parse_dt(ctx);
+	if (ret)
+		return ret;
+
+	ctx->supplies[0].supply = "vdd3";
+	ctx->supplies[1].supply = "vci";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
+					ctx->supplies);
+	if (ret) {
+		dev_err(dev, "failed to get regulators: %d\n", ret);
+		return ret;
+	}
+
+	ctx->reset_gpio = devm_gpiod_get(dev, "reset");
+	if (IS_ERR(ctx->reset_gpio)) {
+		dev_err(dev, "failed to get reset gpio: %ld\n",
+						PTR_ERR(ctx->reset_gpio));
+		return PTR_ERR(ctx->reset_gpio);
+	}
+	ret = gpiod_direction_output(ctx->reset_gpio, 1);
+	if (ret < 0) {
+		dev_err(dev, "failed to configure reset gpio: %d\n", ret);
+		return ret;
+	}
+
+	ctx->det_gpio = devm_gpiod_get(dev, "det");
+	if (IS_ERR(ctx->det_gpio)) {
+		dev_err(dev, "failed to get det gpio: %ld\n",
+						PTR_ERR(ctx->det_gpio));
+		return PTR_ERR(ctx->det_gpio);
+	}
+	ret = gpiod_direction_input(ctx->det_gpio);
+	if (ret < 0) {
+		dev_err(dev, "failed to configure det gpio: %d\n", ret);
+		return ret;
+	}
+	ret = devm_request_irq(dev, gpiod_to_irq(ctx->det_gpio),
+						s6e3fa0_det_interrupt,
+						IRQF_TRIGGER_FALLING,
+						"oled-det", ctx);
+	if (ret) {
+		dev_err(dev, "failed to request det irq: %d\n", ret);
+		return ret;
+	}
+
+	ctx->te_gpio = devm_gpiod_get(dev, "te");
+	if (IS_ERR(ctx->te_gpio)) {
+		dev_err(dev, "failed to get te gpio: %ld\n",
+						PTR_ERR(ctx->te_gpio));
+		return PTR_ERR(ctx->te_gpio);
+	}
+	ret = gpiod_direction_input(ctx->te_gpio);
+	if (ret < 0) {
+		dev_err(dev, "failed to configure te gpio: %d\n", ret);
+		return ret;
+	}
+	ret = devm_request_irq(dev, gpiod_to_irq(ctx->te_gpio),
+						s6e3fa0_te_interrupt,
+						IRQF_TRIGGER_RISING,
+						"TE", ctx);
+	if (ret) {
+		dev_err(dev, "failed to request det irq: %d\n", ret);
+		return ret;
+	}
+
+	ctx->power_on_delay = 10;
+	ctx->reset_delay = 5;
+	ctx->init_delay = 120;
+	ctx->width_mm = 71;
+	ctx->height_mm = 126;
+
+	ctx->brightness = GAMMA_LEVEL_NUM - 1;
+
+	drm_panel_init(&ctx->panel);
+	ctx->panel.dev = dev;
+	ctx->panel.funcs = &s6e3fa0_drm_funcs;
+
+	ret = drm_panel_add(&ctx->panel);
+	if (ret)
+		return ret;
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret)
+		drm_panel_remove(&ctx->panel);
+
+	return ret;
+}
+
+static int s6e3fa0_remove(struct mipi_dsi_device *dsi)
+{
+	struct s6e3fa0 *ctx = mipi_dsi_get_drvdata(dsi);
+
+	mipi_dsi_detach(dsi);
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static struct of_device_id s6e3fa0_of_match[] = {
+	{ .compatible = "samsung,s6e3fa0" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, s6e3fa0_of_match);
+
+static struct mipi_dsi_driver s6e3fa0_driver = {
+	.probe = s6e3fa0_probe,
+	.remove = s6e3fa0_remove,
+	.driver = {
+		.name = "panel_s6e3fa0",
+		.owner = THIS_MODULE,
+		.of_match_table = s6e3fa0_of_match,
+	},
+};
+module_mipi_dsi_driver(s6e3fa0_driver);
+
+MODULE_AUTHOR("YoungJun Cho <yj44.cho@samsung.com>");
+MODULE_DESCRIPTION("MIPI DSI command mode based s6e3fa0 AMOLED LCD Driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

  parent reply	other threads:[~2014-06-05  6:19 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-05  6:19 [PATCH v4 00/14] drm/exynos: support LCD I80 interface display YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 01/14] drm/exynos: dsi: move the EoT packets configuration point YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 02/14] drm/exynos: use wait_event_timeout() for safety usage YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 03/14] ARM: dts: samsung-fimd: add LCD I80 interface specific properties YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 04/14] drm/exynos: add TE handler to support LCD I80 interface YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 05/14] drm/exynos: dsi: " YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 06/14] drm/exynos: fimd: " YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 07/14] ARM: dts: exynos_dsim: add exynos5420 compatible to DT bindings YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 08/14] drm/exynos: dsi: add driver data to support Exynos5420 YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 09/14] ARM: dts: s6e3fa0: add DT bindings YoungJun Cho
2014-06-05  6:19 ` YoungJun Cho [this message]
2014-06-05  6:19 ` [PATCH v4 11/14] ARM: dts: exynos4: add system register property YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 12/14] ARM: dts: exynos5: " YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 13/14] ARM: dts: exynos5420: add mipi-phy node YoungJun Cho
2014-06-05  6:19 ` [PATCH v4 14/14] ARM: dts: exynos5420: add dsi node YoungJun Cho
2014-06-05  8:14 ` [PATCH v4 00/14] drm/exynos: support LCD I80 interface display Inki Dae
2014-06-05  8:20   ` Thierry Reding
2014-06-05  8:43     ` Inki Dae
2014-06-05  8:51       ` Thierry Reding

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1401949194-20092-11-git-send-email-yj44.cho@samsung.com \
    --to=yj44.cho@samsung.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=galak@codeaurora.org \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=kgene.kim@samsung.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=pawel.moll@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=sw0312.kim@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.