From: Stephen Boyd <sboyd@codeaurora.org> To: Mike Turquette <mturquette@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Kumar Gala <galak@codeaurora.org> Subject: [PATCH 1/2] clk: qcom: add clocks necessary for apq8064 sdcc Date: Tue, 10 Jun 2014 13:58:25 -0700 [thread overview] Message-ID: <1402433906-19309-2-git-send-email-sboyd@codeaurora.org> (raw) In-Reply-To: <1402433906-19309-1-git-send-email-sboyd@codeaurora.org> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> This patch adds clocks necessary for SD card controller on apq8064 SOC. Without this patch the clocks are visible to the sdcc driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> --- drivers/clk/qcom/gcc-msm8960.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c index f4ffd91901f8..c47a75829b2b 100644 --- a/drivers/clk/qcom/gcc-msm8960.c +++ b/drivers/clk/qcom/gcc-msm8960.c @@ -2876,6 +2876,14 @@ static struct clk_regmap *gcc_apq8064_clks[] = { [GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr, [GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr, [GSBI7_H_CLK] = &gsbi7_h_clk.clkr, + [SDC1_SRC] = &sdc1_src.clkr, + [SDC1_CLK] = &sdc1_clk.clkr, + [SDC2_SRC] = &sdc2_src.clkr, + [SDC2_CLK] = &sdc2_clk.clkr, + [SDC3_SRC] = &sdc3_src.clkr, + [SDC3_CLK] = &sdc3_clk.clkr, + [SDC4_SRC] = &sdc4_src.clkr, + [SDC4_CLK] = &sdc4_clk.clkr, }; static const struct regmap_config gcc_msm8960_regmap_config = { -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/2] clk: qcom: add clocks necessary for apq8064 sdcc Date: Tue, 10 Jun 2014 13:58:25 -0700 [thread overview] Message-ID: <1402433906-19309-2-git-send-email-sboyd@codeaurora.org> (raw) In-Reply-To: <1402433906-19309-1-git-send-email-sboyd@codeaurora.org> From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> This patch adds clocks necessary for SD card controller on apq8064 SOC. Without this patch the clocks are visible to the sdcc driver. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> --- drivers/clk/qcom/gcc-msm8960.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/clk/qcom/gcc-msm8960.c b/drivers/clk/qcom/gcc-msm8960.c index f4ffd91901f8..c47a75829b2b 100644 --- a/drivers/clk/qcom/gcc-msm8960.c +++ b/drivers/clk/qcom/gcc-msm8960.c @@ -2876,6 +2876,14 @@ static struct clk_regmap *gcc_apq8064_clks[] = { [GSBI7_QUP_SRC] = &gsbi7_qup_src.clkr, [GSBI7_QUP_CLK] = &gsbi7_qup_clk.clkr, [GSBI7_H_CLK] = &gsbi7_h_clk.clkr, + [SDC1_SRC] = &sdc1_src.clkr, + [SDC1_CLK] = &sdc1_clk.clkr, + [SDC2_SRC] = &sdc2_src.clkr, + [SDC2_CLK] = &sdc2_clk.clkr, + [SDC3_SRC] = &sdc3_src.clkr, + [SDC3_CLK] = &sdc3_clk.clkr, + [SDC4_SRC] = &sdc4_src.clkr, + [SDC4_CLK] = &sdc4_clk.clkr, }; static const struct regmap_config gcc_msm8960_regmap_config = { -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2014-06-10 20:58 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-06-10 20:58 [PATCH 0/2] Support apq8064 global clock control Stephen Boyd 2014-06-10 20:58 ` Stephen Boyd 2014-06-10 20:58 ` Stephen Boyd [this message] 2014-06-10 20:58 ` [PATCH 1/2] clk: qcom: add clocks necessary for apq8064 sdcc Stephen Boyd 2014-06-11 9:14 ` Andreas Färber 2014-06-11 9:14 ` Andreas Färber 2014-06-11 11:11 ` Srinivas Kandagatla 2014-06-11 11:11 ` Srinivas Kandagatla 2014-06-10 20:58 ` [PATCH 2/2] clk: qcom: Fully support apq8064 global clock control Stephen Boyd 2014-06-10 20:58 ` Stephen Boyd 2014-07-10 8:16 ` [PATCH v2 0/2] Support " Srinivas Kandagatla 2014-07-10 8:16 ` Srinivas Kandagatla 2014-07-10 8:18 ` [PATCH v2 1/2] clk: qcom: add clocks necessary for apq8064 sdcc Srinivas Kandagatla 2014-07-10 8:18 ` Srinivas Kandagatla 2014-07-10 8:18 ` Srinivas Kandagatla 2014-07-10 8:18 ` [PATCH v2 2/2] clk: qcom: Fully support apq8064 global clock control Srinivas Kandagatla 2014-07-10 8:18 ` Srinivas Kandagatla 2014-07-10 8:18 ` Srinivas Kandagatla 2014-07-15 8:39 ` [PATCH v2 0/2] Support " Srinivas Kandagatla 2014-07-15 8:39 ` Srinivas Kandagatla
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1402433906-19309-2-git-send-email-sboyd@codeaurora.org \ --to=sboyd@codeaurora.org \ --cc=galak@codeaurora.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mturquette@linaro.org \ --cc=srinivas.kandagatla@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.