All of lore.kernel.org
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Lee Jones <lee.jones@linaro.org>
Cc: Samuel Ortiz <sameo@linux.intel.com>,
	Mark Brown <broonie@kernel.org>,
	Mike Turquette <mturquette@linaro.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Alessandro Zummo <a.zummo@towertech.it>,
	Kukjin Kim <kgene.kim@samsung.com>,
	Doug Anderson <dianders@chromium.org>,
	Olof Johansson <olof@lixom.net>,
	Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
	Daniel Stone <daniels@collabora.com>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Subject: [PATCH v2 05/10] clk: max77686: convert to the generic max clock driver
Date: Mon, 16 Jun 2014 20:02:33 +0200	[thread overview]
Message-ID: <1402941758-11216-6-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1402941758-11216-1-git-send-email-javier.martinez@collabora.co.uk>

Clocks drivers for Maxim PMIC are very similar so they can
be converted to use the generic Maxim clock driver.

Also, while being there use module_platform_driver() helper
macro to eliminate more boilerplate code.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
 drivers/clk/Kconfig        |   1 +
 drivers/clk/clk-max77686.c | 176 +++------------------------------------------
 2 files changed, 9 insertions(+), 168 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 73f78e8..3fd4270 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -38,6 +38,7 @@ config COMMON_CLK_MAX_GEN
 config COMMON_CLK_MAX77686
 	tristate "Clock driver for Maxim 77686 MFD"
 	depends on MFD_MAX77686
+	select COMMON_CLK_MAX_GEN
 	---help---
 	  This driver supports Maxim 77686 crystal oscillator clock. 
 
diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
index 185b611..ed0beb4 100644
--- a/drivers/clk/clk-max77686.c
+++ b/drivers/clk/clk-max77686.c
@@ -31,187 +31,37 @@
 #include <linux/clkdev.h>
 
 #include <dt-bindings/clock/maxim,max77686.h>
-
-struct max77686_clk {
-	struct max77686_dev *iodev;
-	u32 mask;
-	struct clk_hw hw;
-	struct clk_lookup *lookup;
-};
-
-static struct max77686_clk *to_max77686_clk(struct clk_hw *hw)
-{
-	return container_of(hw, struct max77686_clk, hw);
-}
-
-static int max77686_clk_prepare(struct clk_hw *hw)
-{
-	struct max77686_clk *max77686 = to_max77686_clk(hw);
-
-	return regmap_update_bits(max77686->iodev->regmap,
-				  MAX77686_REG_32KHZ, max77686->mask,
-				  max77686->mask);
-}
-
-static void max77686_clk_unprepare(struct clk_hw *hw)
-{
-	struct max77686_clk *max77686 = to_max77686_clk(hw);
-
-	regmap_update_bits(max77686->iodev->regmap,
-		MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
-}
-
-static int max77686_clk_is_prepared(struct clk_hw *hw)
-{
-	struct max77686_clk *max77686 = to_max77686_clk(hw);
-	int ret;
-	u32 val;
-
-	ret = regmap_read(max77686->iodev->regmap,
-				MAX77686_REG_32KHZ, &val);
-
-	if (ret < 0)
-		return -EINVAL;
-
-	return val & max77686->mask;
-}
-
-static unsigned long max77686_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
-{
-	return 32768;
-}
-
-static struct clk_ops max77686_clk_ops = {
-	.prepare	= max77686_clk_prepare,
-	.unprepare	= max77686_clk_unprepare,
-	.is_prepared	= max77686_clk_is_prepared,
-	.recalc_rate	= max77686_recalc_rate,
-};
+#include "clk-max-gen.h"
 
 static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = {
 	[MAX77686_CLK_AP] = {
 		.name = "32khz_ap",
-		.ops = &max77686_clk_ops,
+		.ops = &max_gen_clk_ops,
 		.flags = CLK_IS_ROOT,
 	},
 	[MAX77686_CLK_CP] = {
 		.name = "32khz_cp",
-		.ops = &max77686_clk_ops,
+		.ops = &max_gen_clk_ops,
 		.flags = CLK_IS_ROOT,
 	},
 	[MAX77686_CLK_PMIC] = {
 		.name = "32khz_pmic",
-		.ops = &max77686_clk_ops,
+		.ops = &max_gen_clk_ops,
 		.flags = CLK_IS_ROOT,
 	},
 };
 
-static struct clk *max77686_clk_register(struct device *dev,
-				struct max77686_clk *max77686)
-{
-	struct clk *clk;
-	struct clk_hw *hw = &max77686->hw;
-
-	clk = clk_register(dev, hw);
-	if (IS_ERR(clk))
-		return clk;
-
-	max77686->lookup = kzalloc(sizeof(struct clk_lookup), GFP_KERNEL);
-	if (!max77686->lookup)
-		return ERR_PTR(-ENOMEM);
-
-	max77686->lookup->con_id = hw->init->name;
-	max77686->lookup->clk = clk;
-
-	clkdev_add(max77686->lookup);
-
-	return clk;
-}
-
 static int max77686_clk_probe(struct platform_device *pdev)
 {
 	struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct max77686_clk *max77686_clks[MAX77686_CLKS_NUM];
-	struct clk **clocks;
-	int i, ret;
-
-	clocks = devm_kzalloc(&pdev->dev, sizeof(struct clk *)
-					* MAX77686_CLKS_NUM, GFP_KERNEL);
-	if (!clocks)
-		return -ENOMEM;
-
-	for (i = 0; i < MAX77686_CLKS_NUM; i++) {
-		max77686_clks[i] = devm_kzalloc(&pdev->dev,
-					sizeof(struct max77686_clk), GFP_KERNEL);
-		if (!max77686_clks[i])
-			return -ENOMEM;
-	}
-
-	for (i = 0; i < MAX77686_CLKS_NUM; i++) {
-		max77686_clks[i]->iodev = iodev;
-		max77686_clks[i]->mask = 1 << i;
-		max77686_clks[i]->hw.init = &max77686_clks_init[i];
-
-		clocks[i] = max77686_clk_register(&pdev->dev, max77686_clks[i]);
-		if (IS_ERR(clocks[i])) {
-			ret = PTR_ERR(clocks[i]);
-			dev_err(&pdev->dev, "failed to register %s\n",
-				max77686_clks[i]->hw.init->name);
-			goto err_clocks;
-		}
-	}
-
-	platform_set_drvdata(pdev, clocks);
-
-	if (iodev->dev->of_node) {
-		struct clk_onecell_data *of_data;
-
-		of_data = devm_kzalloc(&pdev->dev,
-					sizeof(*of_data), GFP_KERNEL);
-		if (!of_data) {
-			ret = -ENOMEM;
-			goto err_clocks;
-		}
 
-		of_data->clks = clocks;
-		of_data->clk_num = MAX77686_CLKS_NUM;
-		ret = of_clk_add_provider(iodev->dev->of_node,
-					of_clk_src_onecell_get, of_data);
-		if (ret) {
-			dev_err(&pdev->dev, "failed to register OF clock provider\n");
-			goto err_clocks;
-		}
-	}
-
-	return 0;
-
-err_clocks:
-	for (--i; i >= 0; --i) {
-		clkdev_drop(max77686_clks[i]->lookup);
-		clk_unregister(max77686_clks[i]->hw.clk);
-	}
-
-	return ret;
+	return max_gen_clk_probe(pdev, iodev->regmap, MAX77686_REG_32KHZ,
+				 max77686_clks_init, MAX77686_CLKS_NUM);
 }
 
 static int max77686_clk_remove(struct platform_device *pdev)
 {
-	struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct clk **clocks = platform_get_drvdata(pdev);
-	int i;
-
-	if (iodev->dev->of_node)
-		of_clk_del_provider(iodev->dev->of_node);
-
-	for (i = 0; i < MAX77686_CLKS_NUM; i++) {
-		struct clk_hw *hw = __clk_get_hw(clocks[i]);
-		struct max77686_clk *max77686 = to_max77686_clk(hw);
-
-		clkdev_drop(max77686->lookup);
-		clk_unregister(clocks[i]);
-	}
-	return 0;
+	return max_gen_clk_remove(pdev, MAX77686_CLKS_NUM);
 }
 
 static const struct platform_device_id max77686_clk_id[] = {
@@ -230,17 +80,7 @@ static struct platform_driver max77686_clk_driver = {
 	.id_table = max77686_clk_id,
 };
 
-static int __init max77686_clk_init(void)
-{
-	return platform_driver_register(&max77686_clk_driver);
-}
-subsys_initcall(max77686_clk_init);
-
-static void __init max77686_clk_cleanup(void)
-{
-	platform_driver_unregister(&max77686_clk_driver);
-}
-module_exit(max77686_clk_cleanup);
+module_platform_driver(max77686_clk_driver);
 
 MODULE_DESCRIPTION("MAXIM 77686 Clock Driver");
 MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
-- 
2.0.0.rc2


WARNING: multiple messages have this Message-ID (diff)
From: javier.martinez@collabora.co.uk (Javier Martinez Canillas)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/10] clk: max77686: convert to the generic max clock driver
Date: Mon, 16 Jun 2014 20:02:33 +0200	[thread overview]
Message-ID: <1402941758-11216-6-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1402941758-11216-1-git-send-email-javier.martinez@collabora.co.uk>

Clocks drivers for Maxim PMIC are very similar so they can
be converted to use the generic Maxim clock driver.

Also, while being there use module_platform_driver() helper
macro to eliminate more boilerplate code.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
---
 drivers/clk/Kconfig        |   1 +
 drivers/clk/clk-max77686.c | 176 +++------------------------------------------
 2 files changed, 9 insertions(+), 168 deletions(-)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 73f78e8..3fd4270 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -38,6 +38,7 @@ config COMMON_CLK_MAX_GEN
 config COMMON_CLK_MAX77686
 	tristate "Clock driver for Maxim 77686 MFD"
 	depends on MFD_MAX77686
+	select COMMON_CLK_MAX_GEN
 	---help---
 	  This driver supports Maxim 77686 crystal oscillator clock. 
 
diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c
index 185b611..ed0beb4 100644
--- a/drivers/clk/clk-max77686.c
+++ b/drivers/clk/clk-max77686.c
@@ -31,187 +31,37 @@
 #include <linux/clkdev.h>
 
 #include <dt-bindings/clock/maxim,max77686.h>
-
-struct max77686_clk {
-	struct max77686_dev *iodev;
-	u32 mask;
-	struct clk_hw hw;
-	struct clk_lookup *lookup;
-};
-
-static struct max77686_clk *to_max77686_clk(struct clk_hw *hw)
-{
-	return container_of(hw, struct max77686_clk, hw);
-}
-
-static int max77686_clk_prepare(struct clk_hw *hw)
-{
-	struct max77686_clk *max77686 = to_max77686_clk(hw);
-
-	return regmap_update_bits(max77686->iodev->regmap,
-				  MAX77686_REG_32KHZ, max77686->mask,
-				  max77686->mask);
-}
-
-static void max77686_clk_unprepare(struct clk_hw *hw)
-{
-	struct max77686_clk *max77686 = to_max77686_clk(hw);
-
-	regmap_update_bits(max77686->iodev->regmap,
-		MAX77686_REG_32KHZ, max77686->mask, ~max77686->mask);
-}
-
-static int max77686_clk_is_prepared(struct clk_hw *hw)
-{
-	struct max77686_clk *max77686 = to_max77686_clk(hw);
-	int ret;
-	u32 val;
-
-	ret = regmap_read(max77686->iodev->regmap,
-				MAX77686_REG_32KHZ, &val);
-
-	if (ret < 0)
-		return -EINVAL;
-
-	return val & max77686->mask;
-}
-
-static unsigned long max77686_recalc_rate(struct clk_hw *hw,
-					  unsigned long parent_rate)
-{
-	return 32768;
-}
-
-static struct clk_ops max77686_clk_ops = {
-	.prepare	= max77686_clk_prepare,
-	.unprepare	= max77686_clk_unprepare,
-	.is_prepared	= max77686_clk_is_prepared,
-	.recalc_rate	= max77686_recalc_rate,
-};
+#include "clk-max-gen.h"
 
 static struct clk_init_data max77686_clks_init[MAX77686_CLKS_NUM] = {
 	[MAX77686_CLK_AP] = {
 		.name = "32khz_ap",
-		.ops = &max77686_clk_ops,
+		.ops = &max_gen_clk_ops,
 		.flags = CLK_IS_ROOT,
 	},
 	[MAX77686_CLK_CP] = {
 		.name = "32khz_cp",
-		.ops = &max77686_clk_ops,
+		.ops = &max_gen_clk_ops,
 		.flags = CLK_IS_ROOT,
 	},
 	[MAX77686_CLK_PMIC] = {
 		.name = "32khz_pmic",
-		.ops = &max77686_clk_ops,
+		.ops = &max_gen_clk_ops,
 		.flags = CLK_IS_ROOT,
 	},
 };
 
-static struct clk *max77686_clk_register(struct device *dev,
-				struct max77686_clk *max77686)
-{
-	struct clk *clk;
-	struct clk_hw *hw = &max77686->hw;
-
-	clk = clk_register(dev, hw);
-	if (IS_ERR(clk))
-		return clk;
-
-	max77686->lookup = kzalloc(sizeof(struct clk_lookup), GFP_KERNEL);
-	if (!max77686->lookup)
-		return ERR_PTR(-ENOMEM);
-
-	max77686->lookup->con_id = hw->init->name;
-	max77686->lookup->clk = clk;
-
-	clkdev_add(max77686->lookup);
-
-	return clk;
-}
-
 static int max77686_clk_probe(struct platform_device *pdev)
 {
 	struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct max77686_clk *max77686_clks[MAX77686_CLKS_NUM];
-	struct clk **clocks;
-	int i, ret;
-
-	clocks = devm_kzalloc(&pdev->dev, sizeof(struct clk *)
-					* MAX77686_CLKS_NUM, GFP_KERNEL);
-	if (!clocks)
-		return -ENOMEM;
-
-	for (i = 0; i < MAX77686_CLKS_NUM; i++) {
-		max77686_clks[i] = devm_kzalloc(&pdev->dev,
-					sizeof(struct max77686_clk), GFP_KERNEL);
-		if (!max77686_clks[i])
-			return -ENOMEM;
-	}
-
-	for (i = 0; i < MAX77686_CLKS_NUM; i++) {
-		max77686_clks[i]->iodev = iodev;
-		max77686_clks[i]->mask = 1 << i;
-		max77686_clks[i]->hw.init = &max77686_clks_init[i];
-
-		clocks[i] = max77686_clk_register(&pdev->dev, max77686_clks[i]);
-		if (IS_ERR(clocks[i])) {
-			ret = PTR_ERR(clocks[i]);
-			dev_err(&pdev->dev, "failed to register %s\n",
-				max77686_clks[i]->hw.init->name);
-			goto err_clocks;
-		}
-	}
-
-	platform_set_drvdata(pdev, clocks);
-
-	if (iodev->dev->of_node) {
-		struct clk_onecell_data *of_data;
-
-		of_data = devm_kzalloc(&pdev->dev,
-					sizeof(*of_data), GFP_KERNEL);
-		if (!of_data) {
-			ret = -ENOMEM;
-			goto err_clocks;
-		}
 
-		of_data->clks = clocks;
-		of_data->clk_num = MAX77686_CLKS_NUM;
-		ret = of_clk_add_provider(iodev->dev->of_node,
-					of_clk_src_onecell_get, of_data);
-		if (ret) {
-			dev_err(&pdev->dev, "failed to register OF clock provider\n");
-			goto err_clocks;
-		}
-	}
-
-	return 0;
-
-err_clocks:
-	for (--i; i >= 0; --i) {
-		clkdev_drop(max77686_clks[i]->lookup);
-		clk_unregister(max77686_clks[i]->hw.clk);
-	}
-
-	return ret;
+	return max_gen_clk_probe(pdev, iodev->regmap, MAX77686_REG_32KHZ,
+				 max77686_clks_init, MAX77686_CLKS_NUM);
 }
 
 static int max77686_clk_remove(struct platform_device *pdev)
 {
-	struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
-	struct clk **clocks = platform_get_drvdata(pdev);
-	int i;
-
-	if (iodev->dev->of_node)
-		of_clk_del_provider(iodev->dev->of_node);
-
-	for (i = 0; i < MAX77686_CLKS_NUM; i++) {
-		struct clk_hw *hw = __clk_get_hw(clocks[i]);
-		struct max77686_clk *max77686 = to_max77686_clk(hw);
-
-		clkdev_drop(max77686->lookup);
-		clk_unregister(clocks[i]);
-	}
-	return 0;
+	return max_gen_clk_remove(pdev, MAX77686_CLKS_NUM);
 }
 
 static const struct platform_device_id max77686_clk_id[] = {
@@ -230,17 +80,7 @@ static struct platform_driver max77686_clk_driver = {
 	.id_table = max77686_clk_id,
 };
 
-static int __init max77686_clk_init(void)
-{
-	return platform_driver_register(&max77686_clk_driver);
-}
-subsys_initcall(max77686_clk_init);
-
-static void __init max77686_clk_cleanup(void)
-{
-	platform_driver_unregister(&max77686_clk_driver);
-}
-module_exit(max77686_clk_cleanup);
+module_platform_driver(max77686_clk_driver);
 
 MODULE_DESCRIPTION("MAXIM 77686 Clock Driver");
 MODULE_AUTHOR("Jonghwa Lee <jonghwa3.lee@samsung.com>");
-- 
2.0.0.rc2

  parent reply	other threads:[~2014-06-16 18:03 UTC|newest]

Thread overview: 67+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-16 18:02 [PATCH v2 00/10] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-06-16 18:02 ` Javier Martinez Canillas
2014-06-16 18:02 ` [PATCH v2 01/10] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas
2014-06-17 20:32   ` Lee Jones
2014-06-17 20:32     ` Lee Jones
2014-06-17 20:57   ` Doug Anderson
2014-06-17 20:57     ` Doug Anderson
2014-06-17 20:57     ` Doug Anderson
2014-06-18  9:21     ` Javier Martinez Canillas
2014-06-18  9:21       ` Javier Martinez Canillas
2014-06-18  9:21       ` Javier Martinez Canillas
2014-06-16 18:02 ` [PATCH v2 02/10] clk: max77686: add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas
2014-06-16 18:02 ` [PATCH v2 03/10] Documentation: dt: improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas
2014-06-16 18:02 ` [PATCH v2 04/10] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas
2014-06-16 18:02 ` Javier Martinez Canillas [this message]
2014-06-16 18:02   ` [PATCH v2 05/10] clk: max77686: convert to the generic max clock driver Javier Martinez Canillas
2014-06-16 18:02 ` [PATCH v2 06/10] mfd: Add driver for Maxim 77802 Power Management IC Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas
2014-06-16 19:27   ` Mark Brown
2014-06-16 19:27     ` Mark Brown
2014-06-17 10:57     ` Javier Martinez Canillas
2014-06-17 10:57       ` Javier Martinez Canillas
2014-06-18  8:32       ` Lee Jones
2014-06-18  8:32         ` Lee Jones
2014-06-18  9:50         ` Javier Martinez Canillas
2014-06-18  9:50           ` Javier Martinez Canillas
2014-06-16 18:02 ` [PATCH v2 07/10] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas
2014-06-16 19:25   ` Mark Brown
2014-06-16 19:25     ` Mark Brown
2014-06-17 10:49     ` Javier Martinez Canillas
2014-06-17 10:49       ` Javier Martinez Canillas
2014-06-17 10:49       ` Javier Martinez Canillas
2014-06-17 14:12       ` Mark Brown
2014-06-17 14:12         ` Mark Brown
2014-06-17 16:05         ` Javier Martinez Canillas
2014-06-17 16:05           ` Javier Martinez Canillas
2014-06-21 20:40           ` Mark Brown
2014-06-21 20:40             ` Mark Brown
2014-06-23  9:28             ` Javier Martinez Canillas
2014-06-23  9:28               ` Javier Martinez Canillas
2014-06-23  9:47               ` Mark Brown
2014-06-23  9:47                 ` Mark Brown
2014-06-23  9:47                 ` Mark Brown
2014-06-24 16:43                 ` Javier Martinez Canillas
2014-06-24 16:43                   ` Javier Martinez Canillas
2014-06-17 21:17   ` Lee Jones
2014-06-17 21:17     ` Lee Jones
2014-06-17 21:17     ` Lee Jones
2014-06-18  9:47     ` Javier Martinez Canillas
2014-06-18  9:47       ` Javier Martinez Canillas
2014-06-18 14:10       ` Lee Jones
2014-06-18 14:10         ` Lee Jones
2014-06-19 13:32         ` Alessandro Zummo
2014-06-19 13:32           ` Alessandro Zummo
2014-06-16 18:02 ` [PATCH v2 08/10] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas
2014-06-16 18:02 ` [PATCH v2 09/10] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas
2014-06-16 18:02 ` [PATCH v2 10/10] ARM: dts: Add max77802 device node for exynos5420-peach-pit Javier Martinez Canillas
2014-06-16 18:02   ` Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1402941758-11216-6-git-send-email-javier.martinez@collabora.co.uk \
    --to=javier.martinez@collabora.co.uk \
    --cc=a.zummo@towertech.it \
    --cc=broonie@kernel.org \
    --cc=daniels@collabora.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=olof@lixom.net \
    --cc=sameo@linux.intel.com \
    --cc=sjoerd.simons@collabora.co.uk \
    --cc=tomeu.vizoso@collabora.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.