[PATCH] PM / OPP: Remove ARCH_HAS_OPP

[Mark Brown <broonie@kernel.org>]

From: Mark Brown <broonie@linaro.org>

Since the OPP layer is a kernel library which has been converted to be
directly selectable by its callers rather than user selectable and
requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol
has become redundant and can be removed. Do so.

Signed-off-by: Mark Brown <broonie@linaro.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Shawn Guo <shawn.guo@freescale.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
---

Raphael, IIRC you said that you'd applied this but it seems not to have
appeared in -next.  There's a few more references crept in, I'll try to
get them removed at source.

 Documentation/power/opp.txt    | 3 ---
 arch/arm/mach-exynos/Kconfig   | 1 -
 arch/arm/mach-highbank/Kconfig | 1 -
 arch/arm/mach-imx/Kconfig      | 1 -
 arch/arm/mach-omap2/Kconfig    | 1 -
 arch/arm/mach-shmobile/Kconfig | 2 --
 arch/arm/mach-vexpress/Kconfig | 1 -
 arch/arm/mach-zynq/Kconfig     | 1 -
 drivers/devfreq/Kconfig        | 1 -
 kernel/power/Kconfig           | 3 ---
 10 files changed, 15 deletions(-)

diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt
index a9adad828cdc..c6279c2be47c 100644
--- a/Documentation/power/opp.txt
+++ b/Documentation/power/opp.txt
@@ -51,9 +51,6 @@ Typical usage of the OPP library is as follows:
 SoC framework	-> modifies on required cases certain OPPs	-> OPP layer
 		-> queries to search/retrieve information	->
 
-Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP
-to make the OPP layer available.
-
 OPP layer expects each domain to be represented by a unique device pointer. SoC
 framework registers a set of initial OPPs per device with the OPP layer. This
 list is expected to be an optimally small number typically around 5 per device.
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 8f9b66c4ac78..f7889f6a1353 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -100,7 +100,6 @@ config SOC_EXYNOS5440
 	default y
 	depends on ARCH_EXYNOS5
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-	select ARCH_HAS_OPP
 	select HAVE_ARM_ARCH_TIMER
 	select AUTO_ZRELADDR
 	select MIGHT_HAVE_PCI
diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig
index a5960e2ac090..31aa866c3317 100644
--- a/arch/arm/mach-highbank/Kconfig
+++ b/arch/arm/mach-highbank/Kconfig
@@ -2,7 +2,6 @@ config ARCH_HIGHBANK
 	bool "Calxeda ECX-1000/2000 (Highbank/Midway)" if ARCH_MULTI_V7
 	select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select ARCH_HAS_OPP
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_ERRATA_764369 if SMP
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 2bc7b97861b4..9de84a215abd 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -1,6 +1,5 @@
 menuconfig ARCH_MXC
 	bool "Freescale i.MX family" if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7
-	select ARCH_HAS_OPP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_CPU_SUSPEND if PM
 	select CLKSRC_MMIO
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 1c1ed737f7ab..e7189dcc9309 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -15,7 +15,6 @@ config ARCH_OMAP3
 	bool "TI OMAP3"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
-	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select OMAP_INTERCONNECT
 	select PM_OPP if PM
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 384221d72d22..5814754c1240 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -92,7 +92,6 @@ config ARCH_R8A73A4
 	select CPU_V7
 	select SH_CLK_CPG
 	select RENESAS_IRQC
-	select ARCH_HAS_OPP
 	select SYS_SUPPORTS_SH_CMT
 	select SYS_SUPPORTS_SH_TMU
 
@@ -244,7 +243,6 @@ config MACH_KOELSCH
 config MACH_KZM9G
 	bool "KZM-A9-GT board"
 	depends on ARCH_SH73A0
-	select ARCH_HAS_OPP
 	select ARCH_REQUIRE_GPIOLIB
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 	select SND_SOC_AK4642 if SND_SIMPLE_CARD
diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig
index d8b9330f896a..1af70329b88d 100644
--- a/arch/arm/mach-vexpress/Kconfig
+++ b/arch/arm/mach-vexpress/Kconfig
@@ -64,7 +64,6 @@ config ARCH_VEXPRESS_DCSCB
 
 config ARCH_VEXPRESS_SPC
 	bool "Versatile Express Serial Power Controller (SPC)"
-	select ARCH_HAS_OPP
 	select PM_OPP
 	help
 	  The TC2 (A15x2 A7x3) versatile express core tile integrates a logic
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 0c164f81e72d..aaa5162c1509 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -1,6 +1,5 @@
 config ARCH_ZYNQ
 	bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
-	select ARCH_HAS_OPP
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select ARM_AMBA
 	select ARM_GIC
diff --git a/drivers/devfreq/Kconfig b/drivers/devfreq/Kconfig
index 49e74c1fc639..3dced0a9eae3 100644
--- a/drivers/devfreq/Kconfig
+++ b/drivers/devfreq/Kconfig
@@ -68,7 +68,6 @@ comment "DEVFREQ Drivers"
 config ARM_EXYNOS4_BUS_DEVFREQ
 	bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver"
 	depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
-	select ARCH_HAS_OPP
 	select DEVFREQ_GOV_SIMPLE_ONDEMAND
 	select PM_OPP
 	help
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 9a83d780facd..e4e4121fa327 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -253,9 +253,6 @@ config APM_EMULATION
 	  anything, try disabling/enabling this option (or disabling/enabling
 	  APM in your BIOS).
 
-config ARCH_HAS_OPP
-	bool
-
 config PM_OPP
 	bool
 	---help---
-- 
2.0.1