All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mikko Perttunen <mperttunen@nvidia.com>
To: rui.zhang@intel.com, edubezval@gmail.com, swarren@wwwdotorg.org,
	thierry.reding@gmail.com
Cc: linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Mikko Perttunen <mperttunen@nvidia.com>
Subject: [PATCH v2 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree
Date: Tue, 5 Aug 2014 15:18:55 +0300	[thread overview]
Message-ID: <1407241137-32232-3-git-send-email-mperttunen@nvidia.com> (raw)
In-Reply-To: <1407241137-32232-1-git-send-email-mperttunen@nvidia.com>

This adds the soctherm thermal sensing and management unit to the
Tegra124 device tree along with the four thermal zones corresponding
to the four thermal sensors provided by soctherm.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
 arch/arm/boot/dts/tegra124.dtsi | 47 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 03916ef..a579fab 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -3,6 +3,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
 
 #include "skeleton.dtsi"
 
@@ -756,6 +757,52 @@
 		status = "disabled";
 	};
 
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+		};
+
+		mem {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+		};
+
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+		};
+
+		pllx {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+		};
+	};
+
+	soctherm: soctherm@0,700e2000 {
+		compatible = "nvidia,tegra124-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+			<&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
1.8.1.5

WARNING: multiple messages have this Message-ID (diff)
From: Mikko Perttunen <mperttunen@nvidia.com>
To: <rui.zhang@intel.com>, <edubezval@gmail.com>,
	<swarren@wwwdotorg.org>, <thierry.reding@gmail.com>
Cc: <linux-pm@vger.kernel.org>, <linux-tegra@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Mikko Perttunen <mperttunen@nvidia.com>
Subject: [PATCH v2 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree
Date: Tue, 5 Aug 2014 15:18:55 +0300	[thread overview]
Message-ID: <1407241137-32232-3-git-send-email-mperttunen@nvidia.com> (raw)
In-Reply-To: <1407241137-32232-1-git-send-email-mperttunen@nvidia.com>

This adds the soctherm thermal sensing and management unit to the
Tegra124 device tree along with the four thermal zones corresponding
to the four thermal sensors provided by soctherm.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
 arch/arm/boot/dts/tegra124.dtsi | 47 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 03916ef..a579fab 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -3,6 +3,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
 
 #include "skeleton.dtsi"
 
@@ -756,6 +757,52 @@
 		status = "disabled";
 	};
 
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+		};
+
+		mem {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+		};
+
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+		};
+
+		pllx {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+		};
+	};
+
+	soctherm: soctherm@0,700e2000 {
+		compatible = "nvidia,tegra124-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+			<&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
1.8.1.5


WARNING: multiple messages have this Message-ID (diff)
From: mperttunen@nvidia.com (Mikko Perttunen)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree
Date: Tue, 5 Aug 2014 15:18:55 +0300	[thread overview]
Message-ID: <1407241137-32232-3-git-send-email-mperttunen@nvidia.com> (raw)
In-Reply-To: <1407241137-32232-1-git-send-email-mperttunen@nvidia.com>

This adds the soctherm thermal sensing and management unit to the
Tegra124 device tree along with the four thermal zones corresponding
to the four thermal sensors provided by soctherm.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
---
 arch/arm/boot/dts/tegra124.dtsi | 47 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 03916ef..a579fab 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -3,6 +3,7 @@
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/tegra124-soctherm.h>
 
 #include "skeleton.dtsi"
 
@@ -756,6 +757,52 @@
 		status = "disabled";
 	};
 
+	thermal-zones {
+		cpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>;
+		};
+
+		mem {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>;
+		};
+
+		gpu {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>;
+		};
+
+		pllx {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+
+			thermal-sensors =
+				<&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>;
+		};
+	};
+
+	soctherm: soctherm at 0,700e2000 {
+		compatible = "nvidia,tegra124-soctherm";
+		reg = <0x0 0x700e2000 0x0 0x1000>;
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA124_CLK_TSENSOR>,
+			<&tegra_car TEGRA124_CLK_SOC_THERM>;
+		clock-names = "tsensor", "soctherm";
+		resets = <&tegra_car 78>;
+		reset-names = "soctherm";
+		#thermal-sensor-cells = <1>;
+	};
+
 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
-- 
1.8.1.5

  parent reply	other threads:[~2014-08-05 12:18 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-05 12:18 [PATCH v2 0/4] Tegra124 soctherm driver Mikko Perttunen
2014-08-05 12:18 ` Mikko Perttunen
2014-08-05 12:18 ` Mikko Perttunen
2014-08-05 12:18 ` [PATCH v2 1/4] of: Add bindings for nvidia,tegra124-soctherm Mikko Perttunen
2014-08-05 12:18   ` Mikko Perttunen
2014-08-05 12:18   ` Mikko Perttunen
2014-08-05 13:34   ` Eduardo Valentin
2014-08-05 13:34     ` Eduardo Valentin
2014-08-05 13:44     ` Mikko Perttunen
2014-08-05 13:44       ` Mikko Perttunen
2014-08-05 13:44       ` Mikko Perttunen
2014-08-05 12:18 ` Mikko Perttunen [this message]
2014-08-05 12:18   ` [PATCH v2 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree Mikko Perttunen
2014-08-05 12:18   ` Mikko Perttunen
2014-08-05 12:18 ` [PATCH v2 3/4] ARM: tegra: Add thermal trip points for Jetson TK1 Mikko Perttunen
2014-08-05 12:18   ` Mikko Perttunen
2014-08-05 12:18   ` Mikko Perttunen
2014-08-05 12:18 ` [PATCH v2 4/4] thermal: Add Tegra SOCTHERM thermal management driver Mikko Perttunen
2014-08-05 12:18   ` Mikko Perttunen
2014-08-05 12:18   ` Mikko Perttunen
2014-08-05 12:24   ` Mikko Perttunen
2014-08-05 12:24     ` Mikko Perttunen
2014-08-05 12:24     ` Mikko Perttunen
     [not found]   ` <1407241137-32232-5-git-send-email-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-08-05 13:53     ` Eduardo Valentin
2014-08-05 13:53       ` Eduardo Valentin
2014-08-05 13:53       ` Eduardo Valentin
2014-08-06  7:30       ` Mikko Perttunen
2014-08-06  7:30         ` Mikko Perttunen
2014-08-06  7:30         ` Mikko Perttunen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407241137-32232-3-git-send-email-mperttunen@nvidia.com \
    --to=mperttunen@nvidia.com \
    --cc=edubezval@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=swarren@wwwdotorg.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.