From: Doug Anderson <dianders@chromium.org> To: Mark Brown <broonie@kernel.org>, Chris Zhong <zyw@rock-chips.com> Cc: Sonny Rao <sonnyrao@chromium.org>, Heiko Stuebner <heiko@sntech.de>, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, Doug Anderson <dianders@chromium.org>, lgirdwood@gmail.com, linux-kernel@vger.kernel.org Subject: [PATCH 1/2] regulator: RK808: Add proper input supplies for rk808 Date: Tue, 2 Sep 2014 09:14:28 -0700 [thread overview] Message-ID: <1409674469-12123-2-git-send-email-dianders@chromium.org> (raw) In-Reply-To: <1409674469-12123-1-git-send-email-dianders@chromium.org> The original RK808 regulator driver didn't setup input supplies properly. Add them. Signed-off-by: Doug Anderson <dianders@chromium.org> --- drivers/regulator/rk808-regulator.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 0d11df1..44f5a8d 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -108,6 +108,7 @@ static struct regulator_ops rk808_switch_ops = { static const struct regulator_desc rk808_reg[] = { { .name = "DCDC_REG1", + .supply_name = "vcc1", .id = RK808_ID_DCDC1, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -121,6 +122,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "DCDC_REG2", + .supply_name = "vcc2", .id = RK808_ID_DCDC2, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -134,6 +136,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "DCDC_REG3", + .supply_name = "vcc3", .id = RK808_ID_DCDC3, .ops = &rk808_switch_ops, .type = REGULATOR_VOLTAGE, @@ -143,6 +146,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "DCDC_REG4", + .supply_name = "vcc4", .id = RK808_ID_DCDC4, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -156,6 +160,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG1", + .supply_name = "vcc6", .id = RK808_ID_LDO1, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -169,6 +174,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG2", + .supply_name = "vcc6", .id = RK808_ID_LDO2, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -182,6 +188,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG3", + .supply_name = "vcc7", .id = RK808_ID_LDO3, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -195,6 +202,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG4", + .supply_name = "vcc9", .id = RK808_ID_LDO4, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -208,6 +216,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG5", + .supply_name = "vcc9", .id = RK808_ID_LDO5, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -221,6 +230,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG6", + .supply_name = "vcc10", .id = RK808_ID_LDO6, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -234,6 +244,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG7", + .supply_name = "vcc7", .id = RK808_ID_LDO7, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -247,6 +258,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG8", + .supply_name = "vcc11", .id = RK808_ID_LDO8, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -260,6 +272,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "SWITCH_REG1", + .supply_name = "vcc8", .id = RK808_ID_SWITCH1, .ops = &rk808_switch_ops, .type = REGULATOR_VOLTAGE, @@ -268,6 +281,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "SWITCH_REG2", + .supply_name = "vcc12", .id = RK808_ID_SWITCH2, .ops = &rk808_switch_ops, .type = REGULATOR_VOLTAGE, @@ -364,7 +378,6 @@ static int rk808_regulator_probe(struct platform_device *pdev) if (client->dev.of_node) config.of_node = pdata->of_node[i]; - reg_data->supply_regulator = rk808_reg[i].name; config.init_data = reg_data; rk808_rdev = devm_regulator_register(&pdev->dev, -- 2.1.0.rc2.206.gedb03e5
WARNING: multiple messages have this Message-ID (diff)
From: dianders@chromium.org (Doug Anderson) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/2] regulator: RK808: Add proper input supplies for rk808 Date: Tue, 2 Sep 2014 09:14:28 -0700 [thread overview] Message-ID: <1409674469-12123-2-git-send-email-dianders@chromium.org> (raw) In-Reply-To: <1409674469-12123-1-git-send-email-dianders@chromium.org> The original RK808 regulator driver didn't setup input supplies properly. Add them. Signed-off-by: Doug Anderson <dianders@chromium.org> --- drivers/regulator/rk808-regulator.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 0d11df1..44f5a8d 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -108,6 +108,7 @@ static struct regulator_ops rk808_switch_ops = { static const struct regulator_desc rk808_reg[] = { { .name = "DCDC_REG1", + .supply_name = "vcc1", .id = RK808_ID_DCDC1, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -121,6 +122,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "DCDC_REG2", + .supply_name = "vcc2", .id = RK808_ID_DCDC2, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -134,6 +136,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "DCDC_REG3", + .supply_name = "vcc3", .id = RK808_ID_DCDC3, .ops = &rk808_switch_ops, .type = REGULATOR_VOLTAGE, @@ -143,6 +146,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "DCDC_REG4", + .supply_name = "vcc4", .id = RK808_ID_DCDC4, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -156,6 +160,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG1", + .supply_name = "vcc6", .id = RK808_ID_LDO1, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -169,6 +174,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG2", + .supply_name = "vcc6", .id = RK808_ID_LDO2, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -182,6 +188,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG3", + .supply_name = "vcc7", .id = RK808_ID_LDO3, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -195,6 +202,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG4", + .supply_name = "vcc9", .id = RK808_ID_LDO4, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -208,6 +216,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG5", + .supply_name = "vcc9", .id = RK808_ID_LDO5, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -221,6 +230,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG6", + .supply_name = "vcc10", .id = RK808_ID_LDO6, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -234,6 +244,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG7", + .supply_name = "vcc7", .id = RK808_ID_LDO7, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -247,6 +258,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "LDO_REG8", + .supply_name = "vcc11", .id = RK808_ID_LDO8, .ops = &rk808_reg_ops, .type = REGULATOR_VOLTAGE, @@ -260,6 +272,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "SWITCH_REG1", + .supply_name = "vcc8", .id = RK808_ID_SWITCH1, .ops = &rk808_switch_ops, .type = REGULATOR_VOLTAGE, @@ -268,6 +281,7 @@ static const struct regulator_desc rk808_reg[] = { .owner = THIS_MODULE, }, { .name = "SWITCH_REG2", + .supply_name = "vcc12", .id = RK808_ID_SWITCH2, .ops = &rk808_switch_ops, .type = REGULATOR_VOLTAGE, @@ -364,7 +378,6 @@ static int rk808_regulator_probe(struct platform_device *pdev) if (client->dev.of_node) config.of_node = pdata->of_node[i]; - reg_data->supply_regulator = rk808_reg[i].name; config.init_data = reg_data; rk808_rdev = devm_regulator_register(&pdev->dev, -- 2.1.0.rc2.206.gedb03e5
next prev parent reply other threads:[~2014-09-02 16:15 UTC|newest] Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-09-02 16:14 [PATCH 0/2] Add input supplies to rk808 regulator Doug Anderson 2014-09-02 16:14 ` Doug Anderson 2014-09-02 16:14 ` Doug Anderson [this message] 2014-09-02 16:14 ` [PATCH 1/2] regulator: RK808: Add proper input supplies for rk808 Doug Anderson 2014-09-02 16:14 ` [PATCH 2/2] dt-bindings: Add input supplies to rk808 bindings Doug Anderson 2014-09-02 16:14 ` Doug Anderson 2014-09-02 16:31 ` Mark Brown 2014-09-02 16:31 ` Mark Brown 2014-09-02 16:31 ` Mark Brown 2014-09-02 16:53 ` Doug Anderson 2014-09-02 16:53 ` Doug Anderson 2014-09-02 16:53 ` Doug Anderson 2014-09-02 19:48 ` [PATCH 0/2] Add input supplies to rk808 regulator Heiko Stübner 2014-09-02 19:48 ` Heiko Stübner 2014-09-02 19:50 ` Doug Anderson 2014-09-02 19:50 ` Doug Anderson 2014-09-02 19:50 ` Doug Anderson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1409674469-12123-2-git-send-email-dianders@chromium.org \ --to=dianders@chromium.org \ --cc=broonie@kernel.org \ --cc=heiko@sntech.de \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=sonnyrao@chromium.org \ --cc=zyw@rock-chips.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.