All of lore.kernel.org
 help / color / mirror / Atom feed
From: Romain Perier <romain.perier@gmail.com>
To: heiko@sntech.de
Cc: linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, arnd@arndb.de
Subject: [PATCH 4/4] ARM: dts: Enable emac node on the rk3188-radxarock boards
Date: Wed,  3 Sep 2014 10:27:16 +0000	[thread overview]
Message-ID: <1409740036-8117-4-git-send-email-romain.perier@gmail.com> (raw)
In-Reply-To: <1409740036-8117-1-git-send-email-romain.perier@gmail.com>

This enables EMAC Rockchip support on radxa rock boards.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
 arch/arm/boot/dts/rk3188-radxarock.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 5e4e3c23..e1358d3 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -76,6 +76,24 @@
 	};
 };
 
+&emac {
+	status = "okay";
+	compatible = "rockchip,rk3188-emac";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+	mac-address = [ c6 ef 91 8e 60 4b ];
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -201,6 +219,12 @@
 		};
 	};
 
+	lan8720a  {
+		phy_int: phy-int {
+			rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	ir-receiver {
 		ir_recv_pin: ir-recv-pin {
 			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
-- 
1.9.1

WARNING: multiple messages have this Message-ID (diff)
From: romain.perier@gmail.com (Romain Perier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/4] ARM: dts: Enable emac node on the rk3188-radxarock boards
Date: Wed,  3 Sep 2014 10:27:16 +0000	[thread overview]
Message-ID: <1409740036-8117-4-git-send-email-romain.perier@gmail.com> (raw)
In-Reply-To: <1409740036-8117-1-git-send-email-romain.perier@gmail.com>

This enables EMAC Rockchip support on radxa rock boards.

Signed-off-by: Romain Perier <romain.perier@gmail.com>
---
 arch/arm/boot/dts/rk3188-radxarock.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index 5e4e3c23..e1358d3 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -76,6 +76,24 @@
 	};
 };
 
+&emac {
+	status = "okay";
+	compatible = "rockchip,rk3188-emac";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+	mac-address = [ c6 ef 91 8e 60 4b ];
+	phy = <&phy0>;
+	phy-supply = <&vcc_rmii>;
+
+	phy0: ethernet-phy at 0 {
+		reg = <0>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
 &i2c1 {
 	status = "okay";
 	clock-frequency = <400000>;
@@ -201,6 +219,12 @@
 		};
 	};
 
+	lan8720a  {
+		phy_int: phy-int {
+			rockchip,pins = <RK_GPIO3 26 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	ir-receiver {
 		ir_recv_pin: ir-recv-pin {
 			rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO &pcfg_pull_none>;
-- 
1.9.1

  parent reply	other threads:[~2014-09-03 10:25 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-03 10:27 [PATCH v4 1/4] ethernet: arc: Add support for Rockchip SoC layer device tree bindings Romain Perier
2014-09-03 10:27 ` Romain Perier
2014-09-03 10:27 ` [PATCH 2/4] dt-bindings: Document EMAC Rockchip Romain Perier
2014-09-03 10:27   ` Romain Perier
2014-09-03 14:26   ` Heiko Stübner
2014-09-03 14:26     ` Heiko Stübner
2014-09-03 10:27 ` [PATCH 3/4] ARM: dts: Add emac nodes to the rk3188 device tree Romain Perier
2014-09-03 10:27   ` Romain Perier
2014-09-03 10:27 ` Romain Perier [this message]
2014-09-03 10:27   ` [PATCH 4/4] ARM: dts: Enable emac node on the rk3188-radxarock boards Romain Perier
2014-09-03 15:29   ` Naoki FUKAUMI
2014-09-03 15:29     ` Naoki FUKAUMI
2014-09-03 16:37     ` PERIER Romain
2014-09-03 16:37       ` PERIER Romain
2014-09-03 17:45       ` Arnd Bergmann
2014-09-03 17:45         ` Arnd Bergmann
2014-09-03 10:42 ` [PATCH v4 1/4] ethernet: arc: Add support for Rockchip SoC layer device tree bindings Varka Bhadram
2014-09-03 10:42   ` Varka Bhadram
2014-09-03 11:14 ` Arnd Bergmann
2014-09-03 11:14   ` Arnd Bergmann
2014-09-03 12:20   ` Heiko Stübner
2014-09-03 12:20     ` Heiko Stübner
2014-09-03 12:50     ` Arnd Bergmann
2014-09-03 12:50       ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1409740036-8117-4-git-send-email-romain.perier@gmail.com \
    --to=romain.perier@gmail.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.