[PATCH 02/18] Remove i810_drm.h and i830_drm.h from the distribution tarball

[Emil Velikov <emil.l.velikov@gmail.com>]

Both of these headers are not installed since they were imported.
They  are not even used internally. The latter does not exist in the
kernel...

Note the * symbol in EXTRA_DIST causes 'make distcheck' fail. When was
the last time we ran it ?

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
---
 Makefile.am            |   2 +-
 include/drm/i810_drm.h | 281 ----------------------------------------
 include/drm/i830_drm.h | 342 -------------------------------------------------
 3 files changed, 1 insertion(+), 624 deletions(-)
 delete mode 100644 include/drm/i810_drm.h
 delete mode 100644 include/drm/i830_drm.h

diff --git a/Makefile.am b/Makefile.am
index 083861f..a9ec25b 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -69,7 +69,7 @@ libdrm_la_SOURCES = $(LIBDRM_FILES)
 libdrmincludedir = ${includedir}
 libdrminclude_HEADERS = $(LIBDRM_H_FILES)
 
-EXTRA_DIST = libdrm.pc.in include/drm/*
+EXTRA_DIST = libdrm.pc.in
 
 klibdrmincludedir = ${includedir}/libdrm
 klibdrminclude_HEADERS = $(LIBDRM_INCLUDE_H_FILES)
diff --git a/include/drm/i810_drm.h b/include/drm/i810_drm.h
deleted file mode 100644
index 7a10bb6..0000000
--- a/include/drm/i810_drm.h
+++ /dev/null
@@ -1,281 +0,0 @@
-#ifndef _I810_DRM_H_
-#define _I810_DRM_H_
-
-/* WARNING: These defines must be the same as what the Xserver uses.
- * if you change them, you must change the defines in the Xserver.
- */
-
-#ifndef _I810_DEFINES_
-#define _I810_DEFINES_
-
-#define I810_DMA_BUF_ORDER		12
-#define I810_DMA_BUF_SZ 		(1<<I810_DMA_BUF_ORDER)
-#define I810_DMA_BUF_NR 		256
-#define I810_NR_SAREA_CLIPRECTS 	8
-
-/* Each region is a minimum of 64k, and there are at most 64 of them.
- */
-#define I810_NR_TEX_REGIONS 64
-#define I810_LOG_MIN_TEX_REGION_SIZE 16
-#endif
-
-#define I810_UPLOAD_TEX0IMAGE  0x1	/* handled clientside */
-#define I810_UPLOAD_TEX1IMAGE  0x2	/* handled clientside */
-#define I810_UPLOAD_CTX        0x4
-#define I810_UPLOAD_BUFFERS    0x8
-#define I810_UPLOAD_TEX0       0x10
-#define I810_UPLOAD_TEX1       0x20
-#define I810_UPLOAD_CLIPRECTS  0x40
-
-/* Indices into buf.Setup where various bits of state are mirrored per
- * context and per buffer.  These can be fired at the card as a unit,
- * or in a piecewise fashion as required.
- */
-
-/* Destbuffer state
- *    - backbuffer linear offset and pitch -- invarient in the current dri
- *    - zbuffer linear offset and pitch -- also invarient
- *    - drawing origin in back and depth buffers.
- *
- * Keep the depth/back buffer state here to accommodate private buffers
- * in the future.
- */
-#define I810_DESTREG_DI0  0	/* CMD_OP_DESTBUFFER_INFO (2 dwords) */
-#define I810_DESTREG_DI1  1
-#define I810_DESTREG_DV0  2	/* GFX_OP_DESTBUFFER_VARS (2 dwords) */
-#define I810_DESTREG_DV1  3
-#define I810_DESTREG_DR0  4	/* GFX_OP_DRAWRECT_INFO (4 dwords) */
-#define I810_DESTREG_DR1  5
-#define I810_DESTREG_DR2  6
-#define I810_DESTREG_DR3  7
-#define I810_DESTREG_DR4  8
-#define I810_DEST_SETUP_SIZE 10
-
-/* Context state
- */
-#define I810_CTXREG_CF0   0	/* GFX_OP_COLOR_FACTOR */
-#define I810_CTXREG_CF1   1
-#define I810_CTXREG_ST0   2	/* GFX_OP_STIPPLE */
-#define I810_CTXREG_ST1   3
-#define I810_CTXREG_VF    4	/* GFX_OP_VERTEX_FMT */
-#define I810_CTXREG_MT    5	/* GFX_OP_MAP_TEXELS */
-#define I810_CTXREG_MC0   6	/* GFX_OP_MAP_COLOR_STAGES - stage 0 */
-#define I810_CTXREG_MC1   7	/* GFX_OP_MAP_COLOR_STAGES - stage 1 */
-#define I810_CTXREG_MC2   8	/* GFX_OP_MAP_COLOR_STAGES - stage 2 */
-#define I810_CTXREG_MA0   9	/* GFX_OP_MAP_ALPHA_STAGES - stage 0 */
-#define I810_CTXREG_MA1   10	/* GFX_OP_MAP_ALPHA_STAGES - stage 1 */
-#define I810_CTXREG_MA2   11	/* GFX_OP_MAP_ALPHA_STAGES - stage 2 */
-#define I810_CTXREG_SDM   12	/* GFX_OP_SRC_DEST_MONO */
-#define I810_CTXREG_FOG   13	/* GFX_OP_FOG_COLOR */
-#define I810_CTXREG_B1    14	/* GFX_OP_BOOL_1 */
-#define I810_CTXREG_B2    15	/* GFX_OP_BOOL_2 */
-#define I810_CTXREG_LCS   16	/* GFX_OP_LINEWIDTH_CULL_SHADE_MODE */
-#define I810_CTXREG_PV    17	/* GFX_OP_PV_RULE -- Invarient! */
-#define I810_CTXREG_ZA    18	/* GFX_OP_ZBIAS_ALPHAFUNC */
-#define I810_CTXREG_AA    19	/* GFX_OP_ANTIALIAS */
-#define I810_CTX_SETUP_SIZE 20
-
-/* Texture state (per tex unit)
- */
-#define I810_TEXREG_MI0  0	/* GFX_OP_MAP_INFO (4 dwords) */
-#define I810_TEXREG_MI1  1
-#define I810_TEXREG_MI2  2
-#define I810_TEXREG_MI3  3
-#define I810_TEXREG_MF   4	/* GFX_OP_MAP_FILTER */
-#define I810_TEXREG_MLC  5	/* GFX_OP_MAP_LOD_CTL */
-#define I810_TEXREG_MLL  6	/* GFX_OP_MAP_LOD_LIMITS */
-#define I810_TEXREG_MCS  7	/* GFX_OP_MAP_COORD_SETS ??? */
-#define I810_TEX_SETUP_SIZE 8
-
-/* Flags for clear ioctl
- */
-#define I810_FRONT   0x1
-#define I810_BACK    0x2
-#define I810_DEPTH   0x4
-
-typedef enum _drm_i810_init_func {
-	I810_INIT_DMA = 0x01,
-	I810_CLEANUP_DMA = 0x02,
-	I810_INIT_DMA_1_4 = 0x03
-} drm_i810_init_func_t;
-
-/* This is the init structure after v1.2 */
-typedef struct _drm_i810_init {
-	drm_i810_init_func_t func;
-	unsigned int mmio_offset;
-	unsigned int buffers_offset;
-	int sarea_priv_offset;
-	unsigned int ring_start;
-	unsigned int ring_end;
-	unsigned int ring_size;
-	unsigned int front_offset;
-	unsigned int back_offset;
-	unsigned int depth_offset;
-	unsigned int overlay_offset;
-	unsigned int overlay_physical;
-	unsigned int w;
-	unsigned int h;
-	unsigned int pitch;
-	unsigned int pitch_bits;
-} drm_i810_init_t;
-
-/* This is the init structure prior to v1.2 */
-typedef struct _drm_i810_pre12_init {
-	drm_i810_init_func_t func;
-	unsigned int mmio_offset;
-	unsigned int buffers_offset;
-	int sarea_priv_offset;
-	unsigned int ring_start;
-	unsigned int ring_end;
-	unsigned int ring_size;
-	unsigned int front_offset;
-	unsigned int back_offset;
-	unsigned int depth_offset;
-	unsigned int w;
-	unsigned int h;
-	unsigned int pitch;
-	unsigned int pitch_bits;
-} drm_i810_pre12_init_t;
-
-/* Warning: If you change the SAREA structure you must change the Xserver
- * structure as well */
-
-typedef struct _drm_i810_tex_region {
-	unsigned char next, prev;	/* indices to form a circular LRU  */
-	unsigned char in_use;	/* owned by a client, or free? */
-	int age;		/* tracked by clients to update local LRU's */
-} drm_i810_tex_region_t;
-
-typedef struct _drm_i810_sarea {
-	unsigned int ContextState[I810_CTX_SETUP_SIZE];
-	unsigned int BufferState[I810_DEST_SETUP_SIZE];
-	unsigned int TexState[2][I810_TEX_SETUP_SIZE];
-	unsigned int dirty;
-
-	unsigned int nbox;
-	struct drm_clip_rect boxes[I810_NR_SAREA_CLIPRECTS];
-
-	/* Maintain an LRU of contiguous regions of texture space.  If
-	 * you think you own a region of texture memory, and it has an
-	 * age different to the one you set, then you are mistaken and
-	 * it has been stolen by another client.  If global texAge
-	 * hasn't changed, there is no need to walk the list.
-	 *
-	 * These regions can be used as a proxy for the fine-grained
-	 * texture information of other clients - by maintaining them
-	 * in the same lru which is used to age their own textures,
-	 * clients have an approximate lru for the whole of global
-	 * texture space, and can make informed decisions as to which
-	 * areas to kick out.  There is no need to choose whether to
-	 * kick out your own texture or someone else's - simply eject
-	 * them all in LRU order.
-	 */
-
-	drm_i810_tex_region_t texList[I810_NR_TEX_REGIONS + 1];
-	/* Last elt is sentinal */
-	int texAge;		/* last time texture was uploaded */
-	int last_enqueue;	/* last time a buffer was enqueued */
-	int last_dispatch;	/* age of the most recently dispatched buffer */
-	int last_quiescent;	/*  */
-	int ctxOwner;		/* last context to upload state */
-
-	int vertex_prim;
-
-	int pf_enabled;		/* is pageflipping allowed? */
-	int pf_active;
-	int pf_current_page;	/* which buffer is being displayed? */
-} drm_i810_sarea_t;
-
-/* WARNING: If you change any of these defines, make sure to change the
- * defines in the Xserver file (xf86drmMga.h)
- */
-
-/* i810 specific ioctls
- * The device specific ioctl range is 0x40 to 0x79.
- */
-#define DRM_I810_INIT		0x00
-#define DRM_I810_VERTEX		0x01
-#define DRM_I810_CLEAR		0x02
-#define DRM_I810_FLUSH		0x03
-#define DRM_I810_GETAGE		0x04
-#define DRM_I810_GETBUF		0x05
-#define DRM_I810_SWAP		0x06
-#define DRM_I810_COPY		0x07
-#define DRM_I810_DOCOPY		0x08
-#define DRM_I810_OV0INFO	0x09
-#define DRM_I810_FSTATUS	0x0a
-#define DRM_I810_OV0FLIP	0x0b
-#define DRM_I810_MC		0x0c
-#define DRM_I810_RSTATUS	0x0d
-#define DRM_I810_FLIP		0x0e
-
-#define DRM_IOCTL_I810_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_INIT, drm_i810_init_t)
-#define DRM_IOCTL_I810_VERTEX		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_VERTEX, drm_i810_vertex_t)
-#define DRM_IOCTL_I810_CLEAR		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_CLEAR, drm_i810_clear_t)
-#define DRM_IOCTL_I810_FLUSH		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_FLUSH)
-#define DRM_IOCTL_I810_GETAGE		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_GETAGE)
-#define DRM_IOCTL_I810_GETBUF		DRM_IOWR(DRM_COMMAND_BASE + DRM_I810_GETBUF, drm_i810_dma_t)
-#define DRM_IOCTL_I810_SWAP		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_SWAP)
-#define DRM_IOCTL_I810_COPY		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_COPY, drm_i810_copy_t)
-#define DRM_IOCTL_I810_DOCOPY		DRM_IO(  DRM_COMMAND_BASE + DRM_I810_DOCOPY)
-#define DRM_IOCTL_I810_OV0INFO		DRM_IOR( DRM_COMMAND_BASE + DRM_I810_OV0INFO, drm_i810_overlay_t)
-#define DRM_IOCTL_I810_FSTATUS		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FSTATUS)
-#define DRM_IOCTL_I810_OV0FLIP		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_OV0FLIP)
-#define DRM_IOCTL_I810_MC		DRM_IOW( DRM_COMMAND_BASE + DRM_I810_MC, drm_i810_mc_t)
-#define DRM_IOCTL_I810_RSTATUS		DRM_IO ( DRM_COMMAND_BASE + DRM_I810_RSTATUS)
-#define DRM_IOCTL_I810_FLIP             DRM_IO ( DRM_COMMAND_BASE + DRM_I810_FLIP)
-
-typedef struct _drm_i810_clear {
-	int clear_color;
-	int clear_depth;
-	int flags;
-} drm_i810_clear_t;
-
-/* These may be placeholders if we have more cliprects than
- * I810_NR_SAREA_CLIPRECTS.  In that case, the client sets discard to
- * false, indicating that the buffer will be dispatched again with a
- * new set of cliprects.
- */
-typedef struct _drm_i810_vertex {
-	int idx;		/* buffer index */
-	int used;		/* nr bytes in use */
-	int discard;		/* client is finished with the buffer? */
-} drm_i810_vertex_t;
-
-typedef struct _drm_i810_copy_t {
-	int idx;		/* buffer index */
-	int used;		/* nr bytes in use */
-	void *address;		/* Address to copy from */
-} drm_i810_copy_t;
-
-#define PR_TRIANGLES         (0x0<<18)
-#define PR_TRISTRIP_0        (0x1<<18)
-#define PR_TRISTRIP_1        (0x2<<18)
-#define PR_TRIFAN            (0x3<<18)
-#define PR_POLYGON           (0x4<<18)
-#define PR_LINES             (0x5<<18)
-#define PR_LINESTRIP         (0x6<<18)
-#define PR_RECTS             (0x7<<18)
-#define PR_MASK              (0x7<<18)
-
-typedef struct drm_i810_dma {
-	void *virtual;
-	int request_idx;
-	int request_size;
-	int granted;
-} drm_i810_dma_t;
-
-typedef struct _drm_i810_overlay_t {
-	unsigned int offset;	/* Address of the Overlay Regs */
-	unsigned int physical;
-} drm_i810_overlay_t;
-
-typedef struct _drm_i810_mc {
-	int idx;		/* buffer index */
-	int used;		/* nr bytes in use */
-	int num_blocks;		/* number of GFXBlocks */
-	int *length;		/* List of lengths for GFXBlocks (FUTURE) */
-	unsigned int last_render;	/* Last Render Request */
-} drm_i810_mc_t;
-
-#endif				/* _I810_DRM_H_ */
diff --git a/include/drm/i830_drm.h b/include/drm/i830_drm.h
deleted file mode 100644
index e1b08e4..0000000
--- a/include/drm/i830_drm.h
+++ /dev/null
@@ -1,342 +0,0 @@
-#ifndef _I830_DRM_H_
-#define _I830_DRM_H_
-
-/* WARNING: These defines must be the same as what the Xserver uses.
- * if you change them, you must change the defines in the Xserver.
- *
- * KW: Actually, you can't ever change them because doing so would
- * break backwards compatibility.
- */
-
-#ifndef _I830_DEFINES_
-#define _I830_DEFINES_
-
-#define I830_DMA_BUF_ORDER		12
-#define I830_DMA_BUF_SZ			(1<<I830_DMA_BUF_ORDER)
-#define I830_DMA_BUF_NR			256
-#define I830_NR_SAREA_CLIPRECTS		8
-
-/* Each region is a minimum of 64k, and there are at most 64 of them.
- */
-#define I830_NR_TEX_REGIONS 64
-#define I830_LOG_MIN_TEX_REGION_SIZE 16
-
-/* KW: These aren't correct but someone set them to two and then
- * released the module.  Now we can't change them as doing so would
- * break backwards compatibility.
- */
-#define I830_TEXTURE_COUNT	2
-#define I830_TEXBLEND_COUNT	I830_TEXTURE_COUNT
-
-#define I830_TEXBLEND_SIZE	12	/* (4 args + op) * 2 + COLOR_FACTOR */
-
-#define I830_UPLOAD_CTX			0x1
-#define I830_UPLOAD_BUFFERS		0x2
-#define I830_UPLOAD_CLIPRECTS		0x4
-#define I830_UPLOAD_TEX0_IMAGE		0x100	/* handled clientside */
-#define I830_UPLOAD_TEX0_CUBE		0x200	/* handled clientside */
-#define I830_UPLOAD_TEX1_IMAGE		0x400	/* handled clientside */
-#define I830_UPLOAD_TEX1_CUBE		0x800	/* handled clientside */
-#define I830_UPLOAD_TEX2_IMAGE		0x1000	/* handled clientside */
-#define I830_UPLOAD_TEX2_CUBE		0x2000	/* handled clientside */
-#define I830_UPLOAD_TEX3_IMAGE		0x4000	/* handled clientside */
-#define I830_UPLOAD_TEX3_CUBE		0x8000	/* handled clientside */
-#define I830_UPLOAD_TEX_N_IMAGE(n)	(0x100 << (n * 2))
-#define I830_UPLOAD_TEX_N_CUBE(n)	(0x200 << (n * 2))
-#define I830_UPLOAD_TEXIMAGE_MASK	0xff00
-#define I830_UPLOAD_TEX0			0x10000
-#define I830_UPLOAD_TEX1			0x20000
-#define I830_UPLOAD_TEX2			0x40000
-#define I830_UPLOAD_TEX3			0x80000
-#define I830_UPLOAD_TEX_N(n)		(0x10000 << (n))
-#define I830_UPLOAD_TEX_MASK		0xf0000
-#define I830_UPLOAD_TEXBLEND0		0x100000
-#define I830_UPLOAD_TEXBLEND1		0x200000
-#define I830_UPLOAD_TEXBLEND2		0x400000
-#define I830_UPLOAD_TEXBLEND3		0x800000
-#define I830_UPLOAD_TEXBLEND_N(n)	(0x100000 << (n))
-#define I830_UPLOAD_TEXBLEND_MASK	0xf00000
-#define I830_UPLOAD_TEX_PALETTE_N(n)    (0x1000000 << (n))
-#define I830_UPLOAD_TEX_PALETTE_SHARED	0x4000000
-#define I830_UPLOAD_STIPPLE		0x8000000
-
-/* Indices into buf.Setup where various bits of state are mirrored per
- * context and per buffer.  These can be fired at the card as a unit,
- * or in a piecewise fashion as required.
- */
-
-/* Destbuffer state
- *    - backbuffer linear offset and pitch -- invarient in the current dri
- *    - zbuffer linear offset and pitch -- also invarient
- *    - drawing origin in back and depth buffers.
- *
- * Keep the depth/back buffer state here to accommodate private buffers
- * in the future.
- */
-
-#define I830_DESTREG_CBUFADDR 0
-#define I830_DESTREG_DBUFADDR 1
-#define I830_DESTREG_DV0 2
-#define I830_DESTREG_DV1 3
-#define I830_DESTREG_SENABLE 4
-#define I830_DESTREG_SR0 5
-#define I830_DESTREG_SR1 6
-#define I830_DESTREG_SR2 7
-#define I830_DESTREG_DR0 8
-#define I830_DESTREG_DR1 9
-#define I830_DESTREG_DR2 10
-#define I830_DESTREG_DR3 11
-#define I830_DESTREG_DR4 12
-#define I830_DEST_SETUP_SIZE 13
-
-/* Context state
- */
-#define I830_CTXREG_STATE1		0
-#define I830_CTXREG_STATE2		1
-#define I830_CTXREG_STATE3		2
-#define I830_CTXREG_STATE4		3
-#define I830_CTXREG_STATE5		4
-#define I830_CTXREG_IALPHAB		5
-#define I830_CTXREG_STENCILTST		6
-#define I830_CTXREG_ENABLES_1		7
-#define I830_CTXREG_ENABLES_2		8
-#define I830_CTXREG_AA			9
-#define I830_CTXREG_FOGCOLOR		10
-#define I830_CTXREG_BLENDCOLR0		11
-#define I830_CTXREG_BLENDCOLR		12	/* Dword 1 of 2 dword command */
-#define I830_CTXREG_VF			13
-#define I830_CTXREG_VF2			14
-#define I830_CTXREG_MCSB0		15
-#define I830_CTXREG_MCSB1		16
-#define I830_CTX_SETUP_SIZE		17
-
-/* 1.3: Stipple state
- */
-#define I830_STPREG_ST0 0
-#define I830_STPREG_ST1 1
-#define I830_STP_SETUP_SIZE 2
-
-/* Texture state (per tex unit)
- */
-
-#define I830_TEXREG_MI0	0	/* GFX_OP_MAP_INFO (6 dwords) */
-#define I830_TEXREG_MI1	1
-#define I830_TEXREG_MI2	2
-#define I830_TEXREG_MI3	3
-#define I830_TEXREG_MI4	4
-#define I830_TEXREG_MI5	5
-#define I830_TEXREG_MF	6	/* GFX_OP_MAP_FILTER */
-#define I830_TEXREG_MLC	7	/* GFX_OP_MAP_LOD_CTL */
-#define I830_TEXREG_MLL	8	/* GFX_OP_MAP_LOD_LIMITS */
-#define I830_TEXREG_MCS	9	/* GFX_OP_MAP_COORD_SETS */
-#define I830_TEX_SETUP_SIZE 10
-
-#define I830_TEXREG_TM0LI      0	/* load immediate 2 texture map n */
-#define I830_TEXREG_TM0S0      1
-#define I830_TEXREG_TM0S1      2
-#define I830_TEXREG_TM0S2      3
-#define I830_TEXREG_TM0S3      4
-#define I830_TEXREG_TM0S4      5
-#define I830_TEXREG_NOP0       6	/* noop */
-#define I830_TEXREG_NOP1       7	/* noop */
-#define I830_TEXREG_NOP2       8	/* noop */
-#define __I830_TEXREG_MCS      9	/* GFX_OP_MAP_COORD_SETS -- shared */
-#define __I830_TEX_SETUP_SIZE   10
-
-#define I830_FRONT   0x1
-#define I830_BACK    0x2
-#define I830_DEPTH   0x4
-
-#endif				/* _I830_DEFINES_ */
-
-typedef struct _drm_i830_init {
-	enum {
-		I830_INIT_DMA = 0x01,
-		I830_CLEANUP_DMA = 0x02
-	} func;
-	unsigned int mmio_offset;
-	unsigned int buffers_offset;
-	int sarea_priv_offset;
-	unsigned int ring_start;
-	unsigned int ring_end;
-	unsigned int ring_size;
-	unsigned int front_offset;
-	unsigned int back_offset;
-	unsigned int depth_offset;
-	unsigned int w;
-	unsigned int h;
-	unsigned int pitch;
-	unsigned int pitch_bits;
-	unsigned int back_pitch;
-	unsigned int depth_pitch;
-	unsigned int cpp;
-} drm_i830_init_t;
-
-/* Warning: If you change the SAREA structure you must change the Xserver
- * structure as well */
-
-typedef struct _drm_i830_tex_region {
-	unsigned char next, prev;	/* indices to form a circular LRU  */
-	unsigned char in_use;	/* owned by a client, or free? */
-	int age;		/* tracked by clients to update local LRU's */
-} drm_i830_tex_region_t;
-
-typedef struct _drm_i830_sarea {
-	unsigned int ContextState[I830_CTX_SETUP_SIZE];
-	unsigned int BufferState[I830_DEST_SETUP_SIZE];
-	unsigned int TexState[I830_TEXTURE_COUNT][I830_TEX_SETUP_SIZE];
-	unsigned int TexBlendState[I830_TEXBLEND_COUNT][I830_TEXBLEND_SIZE];
-	unsigned int TexBlendStateWordsUsed[I830_TEXBLEND_COUNT];
-	unsigned int Palette[2][256];
-	unsigned int dirty;
-
-	unsigned int nbox;
-	struct drm_clip_rect boxes[I830_NR_SAREA_CLIPRECTS];
-
-	/* Maintain an LRU of contiguous regions of texture space.  If
-	 * you think you own a region of texture memory, and it has an
-	 * age different to the one you set, then you are mistaken and
-	 * it has been stolen by another client.  If global texAge
-	 * hasn't changed, there is no need to walk the list.
-	 *
-	 * These regions can be used as a proxy for the fine-grained
-	 * texture information of other clients - by maintaining them
-	 * in the same lru which is used to age their own textures,
-	 * clients have an approximate lru for the whole of global
-	 * texture space, and can make informed decisions as to which
-	 * areas to kick out.  There is no need to choose whether to
-	 * kick out your own texture or someone else's - simply eject
-	 * them all in LRU order.
-	 */
-
-	drm_i830_tex_region_t texList[I830_NR_TEX_REGIONS + 1];
-	/* Last elt is sentinal */
-	int texAge;		/* last time texture was uploaded */
-	int last_enqueue;	/* last time a buffer was enqueued */
-	int last_dispatch;	/* age of the most recently dispatched buffer */
-	int last_quiescent;	/*  */
-	int ctxOwner;		/* last context to upload state */
-
-	int vertex_prim;
-
-	int pf_enabled;		/* is pageflipping allowed? */
-	int pf_active;
-	int pf_current_page;	/* which buffer is being displayed? */
-
-	int perf_boxes;		/* performance boxes to be displayed */
-
-	/* Here's the state for texunits 2,3:
-	 */
-	unsigned int TexState2[I830_TEX_SETUP_SIZE];
-	unsigned int TexBlendState2[I830_TEXBLEND_SIZE];
-	unsigned int TexBlendStateWordsUsed2;
-
-	unsigned int TexState3[I830_TEX_SETUP_SIZE];
-	unsigned int TexBlendState3[I830_TEXBLEND_SIZE];
-	unsigned int TexBlendStateWordsUsed3;
-
-	unsigned int StippleState[I830_STP_SETUP_SIZE];
-} drm_i830_sarea_t;
-
-/* Flags for perf_boxes
- */
-#define I830_BOX_RING_EMPTY    0x1	/* populated by kernel */
-#define I830_BOX_FLIP          0x2	/* populated by kernel */
-#define I830_BOX_WAIT          0x4	/* populated by kernel & client */
-#define I830_BOX_TEXTURE_LOAD  0x8	/* populated by kernel */
-#define I830_BOX_LOST_CONTEXT  0x10	/* populated by client */
-
-/* I830 specific ioctls
- * The device specific ioctl range is 0x40 to 0x79.
- */
-#define DRM_I830_INIT	0x00
-#define DRM_I830_VERTEX	0x01
-#define DRM_I830_CLEAR	0x02
-#define DRM_I830_FLUSH	0x03
-#define DRM_I830_GETAGE	0x04
-#define DRM_I830_GETBUF	0x05
-#define DRM_I830_SWAP	0x06
-#define DRM_I830_COPY	0x07
-#define DRM_I830_DOCOPY	0x08
-#define DRM_I830_FLIP	0x09
-#define DRM_I830_IRQ_EMIT	0x0a
-#define DRM_I830_IRQ_WAIT	0x0b
-#define DRM_I830_GETPARAM	0x0c
-#define DRM_I830_SETPARAM	0x0d
-
-#define DRM_IOCTL_I830_INIT		DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_INIT, drm_i830_init_t)
-#define DRM_IOCTL_I830_VERTEX		DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_VERTEX, drm_i830_vertex_t)
-#define DRM_IOCTL_I830_CLEAR		DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_CLEAR, drm_i830_clear_t)
-#define DRM_IOCTL_I830_FLUSH		DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_FLUSH)
-#define DRM_IOCTL_I830_GETAGE		DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_GETAGE)
-#define DRM_IOCTL_I830_GETBUF		DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_GETBUF, drm_i830_dma_t)
-#define DRM_IOCTL_I830_SWAP		DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_SWAP)
-#define DRM_IOCTL_I830_COPY		DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_COPY, drm_i830_copy_t)
-#define DRM_IOCTL_I830_DOCOPY		DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_DOCOPY)
-#define DRM_IOCTL_I830_FLIP		DRM_IO ( DRM_COMMAND_BASE + DRM_IOCTL_I830_FLIP)
-#define DRM_IOCTL_I830_IRQ_EMIT         DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_IRQ_EMIT, drm_i830_irq_emit_t)
-#define DRM_IOCTL_I830_IRQ_WAIT         DRM_IOW( DRM_COMMAND_BASE + DRM_IOCTL_I830_IRQ_WAIT, drm_i830_irq_wait_t)
-#define DRM_IOCTL_I830_GETPARAM         DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_GETPARAM, drm_i830_getparam_t)
-#define DRM_IOCTL_I830_SETPARAM         DRM_IOWR(DRM_COMMAND_BASE + DRM_IOCTL_I830_SETPARAM, drm_i830_setparam_t)
-
-typedef struct _drm_i830_clear {
-	int clear_color;
-	int clear_depth;
-	int flags;
-	unsigned int clear_colormask;
-	unsigned int clear_depthmask;
-} drm_i830_clear_t;
-
-/* These may be placeholders if we have more cliprects than
- * I830_NR_SAREA_CLIPRECTS.  In that case, the client sets discard to
- * false, indicating that the buffer will be dispatched again with a
- * new set of cliprects.
- */
-typedef struct _drm_i830_vertex {
-	int idx;		/* buffer index */
-	int used;		/* nr bytes in use */
-	int discard;		/* client is finished with the buffer? */
-} drm_i830_vertex_t;
-
-typedef struct _drm_i830_copy_t {
-	int idx;		/* buffer index */
-	int used;		/* nr bytes in use */
-	void *address;	/* Address to copy from */
-} drm_i830_copy_t;
-
-typedef struct drm_i830_dma {
-	void *virtual;
-	int request_idx;
-	int request_size;
-	int granted;
-} drm_i830_dma_t;
-
-/* 1.3: Userspace can request & wait on irq's:
- */
-typedef struct drm_i830_irq_emit {
-	int *irq_seq;
-} drm_i830_irq_emit_t;
-
-typedef struct drm_i830_irq_wait {
-	int irq_seq;
-} drm_i830_irq_wait_t;
-
-/* 1.3: New ioctl to query kernel params:
- */
-#define I830_PARAM_IRQ_ACTIVE            1
-
-typedef struct drm_i830_getparam {
-	int param;
-	int *value;
-} drm_i830_getparam_t;
-
-/* 1.3: New ioctl to set kernel params:
- */
-#define I830_SETPARAM_USE_MI_BATCHBUFFER_START            1
-
-typedef struct drm_i830_setparam {
-	int param;
-	int value;
-} drm_i830_setparam_t;
-
-#endif				/* _I830_DRM_H_ */
-- 
2.0.2

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel