All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-sh@vger.kernel.org
Subject: [PATCH 11/12] drm: Add adv7511 encoder driver
Date: Wed, 24 Sep 2014 20:04:31 +0000	[thread overview]
Message-ID: <1411589072-28609-12-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1411589072-28609-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>

From: Lars-Peter Clausen <lars@metafoo.de>

This patch adds a driver for the Analog Devices adv7511. The adv7511 is
a standalone HDMI transmitter chip. It features a HDMI output interface
on one end and video and audio input interfaces on the other.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

---

This commit incorporates the following commits.

DRM: adv7511: Sync to latest version
DRM: adv7511: Fix calculation and setting of CTS
DRM: adv7511: Write status word frequency and word len registers
adv7511: Remove some debug printks
Merge branch 'xcomm_zynq' into xcomm_zynq_3_5
Sync adv7511 and axi-hdmi driver to latest version
drm:adv7511: Re-add module information
DRM: adv7511: Don't use raw_edid to pass edid data
drm: adv7511: Ignore the csc scaling factor when the csc is disabled
drm: adv7511: Check if edid is NULL before duplicating it
drm: adv7511: Include the extension sections when duplicating the edid
DRM: adv7511: Work around off-by-one hardware bug
DRM: adv7511: Make embedded sync generator setup more robust
DRM: adv7511_audio: Fix typo
DRM: adv7511: Add powerdown gpio support
drm: adv7511: Fix use after free
DRM: adv7511: Properly initialize dpms_mode and status
DRM: adv7511: Avoid uneccessary disconnected events
drm: adv7511: Fix adv7511 encoder driver
drm: adv7511: Fix kernel-doc format
drm: adv7511: Fix adv7511_parse_dt()
drm: adv7511: Add the rgb format flag to adv7511_link_config
drm: adv7511: Configure CSC in adv7511_set_config()
drm: adv7511: Add adv7511_set_config_csc()
drm: adv7511: Configure the csc when getting modes
drm: adv7511: Add adv7511_encoder_mode_valid() function
drm: adv7511: Don't export adv7511_get_edid function
drm: adv7511: Mark the revision register as volatile
drm: adv7511: Initialize work queue before requesting IRQ
drm: adv7511: Remove trailing whitespaces
drm: adv7511: Remove audio support
drm: adv7511: Remove DRM slave encoder .set_config operation
drm: adv7511: Make the adv7511_packet_(enable|disable) functions static
drm: adv7511: Move Kconfig entry to drivers/gpu/drm/i2c/Kconfig
drm: adv7511: Update to the latest DRM API
drm: adv7511: Rename driver source file to adv7511.c
drm: adv7511: Add OF match table
drm: adv7511: Add ADV7513 support
drm: adv7511: Remove platform data support
drm: adv7511: Convert to the gpiod API
drm: adv7511: Remove packet and CEC I2C device support
drm: adv7511: Use the devm_ managed IRQ API
drm: adv7511: Remove unneeded local variable initialization
drm: adv7511: Pass the adv7511 pointer to adv7511_get_edid_block
drm: adv7511: Make loop counter unsigned
drm: adv7511: Pass adv7511 pointer to adv7511_set_config_csc function
drm: adv7511: Reorganize the code in sections
drm: adv7511: Simplify DT bindings
---
 drivers/gpu/drm/i2c/Kconfig   |    6 +
 drivers/gpu/drm/i2c/Makefile  |    2 +
 drivers/gpu/drm/i2c/adv7511.c | 1007 +++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i2c/adv7511.h |  289 ++++++++++++
 4 files changed, 1304 insertions(+)
 create mode 100644 drivers/gpu/drm/i2c/adv7511.c
 create mode 100644 drivers/gpu/drm/i2c/adv7511.h

diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig
index 4d341db..22c7ed6 100644
--- a/drivers/gpu/drm/i2c/Kconfig
+++ b/drivers/gpu/drm/i2c/Kconfig
@@ -1,6 +1,12 @@
 menu "I2C encoder or helper chips"
      depends on DRM && DRM_KMS_HELPER && I2C
 
+config DRM_I2C_ADV7511
+	tristate "AV7511 encoder"
+	select REGMAP_I2C
+	help
+	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+
 config DRM_I2C_CH7006
 	tristate "Chrontel ch7006 TV encoder"
 	default m if DRM_NOUVEAU
diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile
index 43aa33b..2c72eb5 100644
--- a/drivers/gpu/drm/i2c/Makefile
+++ b/drivers/gpu/drm/i2c/Makefile
@@ -1,5 +1,7 @@
 ccflags-y := -Iinclude/drm
 
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
+
 ch7006-y := ch7006_drv.o ch7006_mode.o
 obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
 
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
new file mode 100644
index 0000000..0a61a17
--- /dev/null
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -0,0 +1,1007 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_encoder_slave.h>
+
+#include "adv7511.h"
+
+struct adv7511 {
+	struct i2c_client *i2c_main;
+	struct i2c_client *i2c_edid;
+
+	struct regmap *regmap;
+	struct regmap *packet_memory_regmap;
+	enum drm_connector_status status;
+	int dpms_mode;
+
+	unsigned int f_tmds;
+
+	unsigned int current_edid_segment;
+	uint8_t edid_buf[256];
+
+	wait_queue_head_t wq;
+	struct drm_encoder *encoder;
+
+	bool embedded_sync;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+	bool rgb;
+
+	struct edid *edid;
+
+	struct gpio_desc *gpio_pd;
+};
+
+static struct adv7511 *encoder_to_adv7511(struct drm_encoder *encoder)
+{
+	return to_encoder_slave(encoder)->slave_priv;
+}
+
+/* ADI recommanded values for proper operation. */
+static const struct reg_default adv7511_fixed_registers[] = {
+	{ 0x98, 0x03 },
+	{ 0x9a, 0xe0 },
+	{ 0x9c, 0x30 },
+	{ 0x9d, 0x61 },
+	{ 0xa2, 0xa4 },
+	{ 0xa3, 0xa4 },
+	{ 0xe0, 0xd0 },
+	{ 0xf9, 0x00 },
+	{ 0x55, 0x02 },
+};
+
+/* -----------------------------------------------------------------------------
+ * Register access
+ */
+
+static const uint8_t adv7511_register_defaults[] = {
+	0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */
+	0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13,
+	0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */
+	0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84,
+	0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */
+	0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0,
+	0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */
+	0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */
+	0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00,
+	0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */
+	0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */
+	0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04,
+	0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01,
+	0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */
+	0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ADV7511_REG_CHIP_REVISION:
+	case ADV7511_REG_SPDIF_FREQ:
+	case ADV7511_REG_CTS_AUTOMATIC1:
+	case ADV7511_REG_CTS_AUTOMATIC2:
+	case ADV7511_REG_VIC_DETECTED:
+	case ADV7511_REG_VIC_SEND:
+	case ADV7511_REG_AUX_VIC_DETECTED:
+	case ADV7511_REG_STATUS:
+	case ADV7511_REG_GC(1):
+	case ADV7511_REG_INT(0):
+	case ADV7511_REG_INT(1):
+	case ADV7511_REG_PLL_STATUS:
+	case ADV7511_REG_AN(0):
+	case ADV7511_REG_AN(1):
+	case ADV7511_REG_AN(2):
+	case ADV7511_REG_AN(3):
+	case ADV7511_REG_AN(4):
+	case ADV7511_REG_AN(5):
+	case ADV7511_REG_AN(6):
+	case ADV7511_REG_AN(7):
+	case ADV7511_REG_HDCP_STATUS:
+	case ADV7511_REG_BCAPS:
+	case ADV7511_REG_BKSV(0):
+	case ADV7511_REG_BKSV(1):
+	case ADV7511_REG_BKSV(2):
+	case ADV7511_REG_BKSV(3):
+	case ADV7511_REG_BKSV(4):
+	case ADV7511_REG_DDC_STATUS:
+	case ADV7511_REG_BSTATUS(0):
+	case ADV7511_REG_BSTATUS(1):
+	case ADV7511_REG_CHIP_ID_HIGH:
+	case ADV7511_REG_CHIP_ID_LOW:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config adv7511_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults_raw = adv7511_register_defaults,
+	.num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults),
+
+	.volatile_reg = adv7511_register_volatile,
+};
+
+/* -----------------------------------------------------------------------------
+ * Hardware configuration
+ */
+
+static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
+				 const uint16_t *coeff,
+				 unsigned int scaling_factor)
+{
+	unsigned int i;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+			   ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE);
+
+	if (enable) {
+		for (i = 0; i < 12; ++i) {
+			regmap_update_bits(adv7511->regmap,
+					   ADV7511_REG_CSC_UPPER(i),
+					   0x1f, coeff[i] >> 8);
+			regmap_write(adv7511->regmap,
+				     ADV7511_REG_CSC_LOWER(i),
+				     coeff[i] & 0xff);
+		}
+	}
+
+	if (enable)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+				   0xe0, 0x80 | (scaling_factor << 5));
+	else
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+				   0x80, 0x00);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+			   ADV7511_CSC_UPDATE_MODE, 0);
+}
+
+static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
+{
+	if (packet & 0xff)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+				   packet, 0xff);
+
+	if (packet & 0xff00) {
+		packet >>= 8;
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				   packet, 0xff);
+	}
+
+	return 0;
+}
+
+static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
+{
+	if (packet & 0xff)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+				   packet, 0x00);
+
+	if (packet & 0xff00) {
+		packet >>= 8;
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				   packet, 0x00);
+	}
+
+	return 0;
+}
+
+/* Coefficients for adv7511 color space conversion */
+static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
+	0x0734, 0x04ad, 0x0000, 0x1c1b,
+	0x1ddc, 0x04ad, 0x1f24, 0x0135,
+	0x0000, 0x04ad, 0x087c, 0x1b77,
+};
+
+static void adv7511_set_config_csc(struct adv7511 *adv7511,
+				   struct drm_connector *connector,
+				   bool rgb)
+{
+	struct adv7511_video_config config;
+	bool output_format_422, output_format_ycbcr;
+	unsigned int mode;
+	uint8_t infoframe[17];
+
+	if (adv7511->edid)
+		config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
+	else
+		config.hdmi_mode = false;
+
+	hdmi_avi_infoframe_init(&config.avi_infoframe);
+
+	config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
+
+	if (rgb) {
+		config.csc_enable = false;
+		config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+	} else {
+		config.csc_scaling_factor = ADV7511_CSC_SCALING_4;
+		config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
+
+		if ((connector->display_info.color_formats &
+		     DRM_COLOR_FORMAT_YCRCB422) &&
+		    config.hdmi_mode) {
+			config.csc_enable = false;
+			config.avi_infoframe.colorspace +				HDMI_COLORSPACE_YUV422;
+		} else {
+			config.csc_enable = true;
+			config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+		}
+	}
+
+	if (config.hdmi_mode) {
+		mode = ADV7511_HDMI_CFG_MODE_HDMI;
+
+		switch (config.avi_infoframe.colorspace) {
+		case HDMI_COLORSPACE_YUV444:
+			output_format_422 = false;
+			output_format_ycbcr = true;
+			break;
+		case HDMI_COLORSPACE_YUV422:
+			output_format_422 = true;
+			output_format_ycbcr = true;
+			break;
+		default:
+			output_format_422 = false;
+			output_format_ycbcr = false;
+			break;
+		}
+	} else {
+		mode = ADV7511_HDMI_CFG_MODE_DVI;
+		output_format_422 = false;
+		output_format_ycbcr = false;
+	}
+
+	adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+
+	adv7511_set_colormap(adv7511, config.csc_enable,
+			     config.csc_coefficents,
+			     config.csc_scaling_factor);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81,
+			   (output_format_422 << 7) | output_format_ycbcr);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
+			   ADV7511_HDMI_CFG_MODE_MASK, mode);
+
+	hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe,
+				sizeof(infoframe));
+
+	/* The AVI infoframe id is not configurable */
+	regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION,
+			  infoframe + 1, sizeof(infoframe) - 1);
+
+	adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+}
+
+static void adv7511_set_link_config(struct adv7511 *adv7511,
+				    const struct adv7511_link_config *config)
+{
+	unsigned int clock_delay;
+	unsigned int color_depth;
+	unsigned int input_style;
+	unsigned int input_id;
+
+	clock_delay = (config->clock_delay + 1200) / 400;
+	color_depth = config->input_color_depth = 8 ? 3
+		    : (config->input_color_depth = 10 ? 1 : 2);
+
+	input_style = config->input_style = 1 ? 2
+		    : (config->input_style = 2 ? 1 : 3);
+
+	/* TODO Support input ID 6 */
+	if (config->input_colorspace != HDMI_COLORSPACE_YUV422)
+		input_id = config->input_clock = ADV7511_INPUT_CLOCK_DDR
+			 ? 5 : 0;
+	else if (config->input_clock = ADV7511_INPUT_CLOCK_DDR)
+		input_id = config->embedded_sync ? 8 : 7;
+	else if (config->input_clock = ADV7511_INPUT_CLOCK_2X)
+		input_id = config->embedded_sync ? 4 : 3;
+	else
+		input_id = config->embedded_sync ? 2 : 1;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf,
+			   input_id);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e,
+			   (color_depth << 4) | (input_style << 2));
+	regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2,
+		     config->input_justification << 3);
+	regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ,
+		     config->sync_pulse << 2);
+
+	regmap_write(adv7511->regmap, 0xba, clock_delay << 5);
+
+	adv7511->embedded_sync = config->embedded_sync;
+	adv7511->hsync_polarity = config->hsync_polarity;
+	adv7511->vsync_polarity = config->vsync_polarity;
+	adv7511->rgb = config->input_colorspace = HDMI_COLORSPACE_RGB;
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt and hotplug detection
+ */
+
+static bool adv7511_hpd(struct adv7511 *adv7511)
+{
+	unsigned int irq0;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+	if (ret < 0)
+		return false;
+
+	if (irq0 & ADV7511_INT0_HDP) {
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_HDP);
+		return true;
+	}
+
+	return false;
+}
+
+static irqreturn_t adv7511_irq_handler(int irq, void *devid)
+{
+	struct adv7511 *adv7511 = devid;
+
+	if (adv7511_hpd(adv7511))
+		drm_helper_hpd_irq_event(adv7511->encoder->dev);
+
+	wake_up_all(&adv7511->wq);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int adv7511_is_interrupt_pending(struct adv7511 *adv7511,
+						 unsigned int irq)
+{
+	unsigned int irq0, irq1;
+	unsigned int pending;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+	if (ret < 0)
+		return 0;
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
+	if (ret < 0)
+		return 0;
+
+	pending = (irq1 << 8) | irq0;
+
+	return pending & irq;
+}
+
+static int adv7511_wait_for_interrupt(struct adv7511 *adv7511, int irq,
+				      int timeout)
+{
+	unsigned int pending;
+	int ret;
+
+	if (adv7511->i2c_main->irq) {
+		ret = wait_event_interruptible_timeout(adv7511->wq,
+				adv7511_is_interrupt_pending(adv7511, irq),
+				msecs_to_jiffies(timeout));
+		if (ret <= 0)
+			return 0;
+		pending = adv7511_is_interrupt_pending(adv7511, irq);
+	} else {
+		if (timeout < 25)
+			timeout = 25;
+		do {
+			pending = adv7511_is_interrupt_pending(adv7511, irq);
+			if (pending)
+				break;
+			msleep(25);
+			timeout -= 25;
+		} while (timeout >= 25);
+	}
+
+	return pending;
+}
+
+/* -----------------------------------------------------------------------------
+ * EDID retrieval
+ */
+
+static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
+				  size_t len)
+{
+	struct adv7511 *adv7511 = data;
+	struct i2c_msg xfer[2];
+	uint8_t offset;
+	unsigned int i;
+	int ret;
+
+	if (len > 128)
+		return -EINVAL;
+
+	if (adv7511->current_edid_segment != block / 2) {
+		unsigned int status;
+
+		ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS,
+				  &status);
+		if (ret < 0)
+			return ret;
+
+		if (status != 2) {
+			regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
+				     block);
+			ret = adv7511_wait_for_interrupt(adv7511,
+					ADV7511_INT0_EDID_READY |
+					ADV7511_INT1_DDC_ERROR, 200);
+
+			if (!(ret & ADV7511_INT0_EDID_READY))
+				return -EIO;
+		}
+
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+
+		/* Break this apart, hopefully more I2C controllers will
+		 * support 64 byte transfers than 256 byte transfers
+		 */
+
+		xfer[0].addr = adv7511->i2c_edid->addr;
+		xfer[0].flags = 0;
+		xfer[0].len = 1;
+		xfer[0].buf = &offset;
+		xfer[1].addr = adv7511->i2c_edid->addr;
+		xfer[1].flags = I2C_M_RD;
+		xfer[1].len = 64;
+		xfer[1].buf = adv7511->edid_buf;
+
+		offset = 0;
+
+		for (i = 0; i < 4; ++i) {
+			ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer,
+					   ARRAY_SIZE(xfer));
+			if (ret < 0)
+				return ret;
+			else if (ret != 2)
+				return -EIO;
+
+			xfer[1].buf += 64;
+			offset += 64;
+		}
+
+		adv7511->current_edid_segment = block / 2;
+	}
+
+	if (block % 2 = 0)
+		memcpy(buf, adv7511->edid_buf, len);
+	else
+		memcpy(buf, adv7511->edid_buf + 128, len);
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Encoder operations
+ */
+
+static int adv7511_get_modes(struct drm_encoder *encoder,
+			     struct drm_connector *connector)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+	struct edid *edid;
+	unsigned int count;
+
+	/* Reading the EDID only works if the device is powered */
+	if (adv7511->dpms_mode != DRM_MODE_DPMS_ON) {
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN, 0);
+		adv7511->current_edid_segment = -1;
+	}
+
+	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
+
+	if (adv7511->dpms_mode != DRM_MODE_DPMS_ON)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN,
+				   ADV7511_POWER_POWER_DOWN);
+
+	kfree(adv7511->edid);
+	adv7511->edid = edid;
+	if (!edid)
+		return 0;
+
+	drm_mode_connector_update_edid_property(connector, edid);
+	count = drm_add_edid_modes(connector, edid);
+
+	adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
+
+	return count;
+}
+
+static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		adv7511->current_edid_segment = -1;
+
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN, 0);
+		/*
+		 * Per spec it is allowed to pulse the HDP signal to indicate
+		 * that the EDID information has changed. Some monitors do this
+		 * when they wakeup from standby or are enabled. When the HDP
+		 * goes low the adv7511 is reset and the outputs are disabled
+		 * which might cause the monitor to go to standby again. To
+		 * avoid this we ignore the HDP pin for the first few seconds
+		 * after enabeling the output.
+		 */
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+				   ADV7511_REG_POWER2_HDP_SRC_MASK,
+				   ADV7511_REG_POWER2_HDP_SRC_NONE);
+		/* Most of the registers are reset during power down or
+		 * when HPD is low
+		 */
+		regcache_sync(adv7511->regmap);
+		break;
+	default:
+		/* TODO: setup additional power down modes */
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN,
+				   ADV7511_POWER_POWER_DOWN);
+		regcache_mark_dirty(adv7511->regmap);
+		break;
+	}
+
+	adv7511->dpms_mode = mode;
+}
+
+static enum drm_connector_status
+adv7511_encoder_detect(struct drm_encoder *encoder,
+		       struct drm_connector *connector)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+	enum drm_connector_status status;
+	unsigned int val;
+	bool hpd;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
+	if (ret < 0)
+		return connector_status_disconnected;
+
+	if (val & ADV7511_STATUS_HPD)
+		status = connector_status_connected;
+	else
+		status = connector_status_disconnected;
+
+	hpd = adv7511_hpd(adv7511);
+
+	/* The chip resets itself when the cable is disconnected, so in case
+	 * there is a pending HPD interrupt and the cable is connected there was
+	 * at least one transition from disconnected to connected and the chip
+	 * has to be reinitialized. */
+	if (status = connector_status_connected && hpd &&
+	    adv7511->dpms_mode = DRM_MODE_DPMS_ON) {
+		regcache_mark_dirty(adv7511->regmap);
+		adv7511_encoder_dpms(encoder, adv7511->dpms_mode);
+		adv7511_get_modes(encoder, connector);
+		if (adv7511->status = connector_status_connected)
+			status = connector_status_disconnected;
+	} else {
+		/* Renable HDP sensing */
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+				   ADV7511_REG_POWER2_HDP_SRC_MASK,
+				   ADV7511_REG_POWER2_HDP_SRC_BOTH);
+	}
+
+	adv7511->status = status;
+	return status;
+}
+
+static int adv7511_encoder_mode_valid(struct drm_encoder *encoder,
+				      struct drm_display_mode *mode)
+{
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	return MODE_OK;
+}
+
+static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
+				     struct drm_display_mode *mode,
+				     struct drm_display_mode *adj_mode)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+	unsigned int low_refresh_rate;
+	unsigned int hsync_polarity = 0;
+	unsigned int vsync_polarity = 0;
+
+	if (adv7511->embedded_sync) {
+		unsigned int hsync_offset, hsync_len;
+		unsigned int vsync_offset, vsync_len;
+
+		hsync_offset = adj_mode->crtc_hsync_start -
+			       adj_mode->crtc_hdisplay;
+		vsync_offset = adj_mode->crtc_vsync_start -
+			       adj_mode->crtc_vdisplay;
+		hsync_len = adj_mode->crtc_hsync_end -
+			    adj_mode->crtc_hsync_start;
+		vsync_len = adj_mode->crtc_vsync_end -
+			    adj_mode->crtc_vsync_start;
+
+		/* The hardware vsync generator has a off-by-one bug */
+		vsync_offset += 1;
+
+		regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB,
+			     ((hsync_offset >> 10) & 0x7) << 5);
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0),
+			     (hsync_offset >> 2) & 0xff);
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1),
+			     ((hsync_offset & 0x3) << 6) |
+			     ((hsync_len >> 4) & 0x3f));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2),
+			     ((hsync_len & 0xf) << 4) |
+			     ((vsync_offset >> 6) & 0xf));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3),
+			     ((vsync_offset & 0x3f) << 2) |
+			     ((vsync_len >> 8) & 0x3));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4),
+			     vsync_len & 0xff);
+
+		hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC);
+		vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC);
+	} else {
+		enum adv7511_sync_polarity mode_hsync_polarity;
+		enum adv7511_sync_polarity mode_vsync_polarity;
+
+		/**
+		 * If the input signal is always low or always high we want to
+		 * invert or let it passthrough depending on the polarity of the
+		 * current mode.
+		 **/
+		if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+		else
+			mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+		if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+		else
+			mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+		if (adv7511->hsync_polarity != mode_hsync_polarity &&
+		    adv7511->hsync_polarity !+		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
+			hsync_polarity = 1;
+
+		if (adv7511->vsync_polarity != mode_vsync_polarity &&
+		    adv7511->vsync_polarity !+		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
+			vsync_polarity = 1;
+	}
+
+	if (mode->vrefresh <= 24000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
+	else if (mode->vrefresh <= 25000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
+	else if (mode->vrefresh <= 30000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
+	else
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
+
+	regmap_update_bits(adv7511->regmap, 0xfb,
+		0x6, low_refresh_rate << 1);
+	regmap_update_bits(adv7511->regmap, 0x17,
+		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
+
+	/*
+	 * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
+	 * supposed to give better results.
+	 */
+
+	adv7511->f_tmds = mode->clock;
+}
+
+static struct drm_encoder_slave_funcs adv7511_encoder_funcs = {
+	.dpms = adv7511_encoder_dpms,
+	.mode_valid = adv7511_encoder_mode_valid,
+	.mode_set = adv7511_encoder_mode_set,
+	.detect = adv7511_encoder_detect,
+	.get_modes = adv7511_get_modes,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & remove
+ */
+
+static int adv7511_parse_dt(struct device_node *np,
+			    struct adv7511_link_config *config)
+{
+	const char *str;
+	int ret;
+
+	memset(config, 0, sizeof(*config));
+
+	of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
+	if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
+	    config->input_color_depth != 12)
+		return -EINVAL;
+
+	ret = of_property_read_string(np, "adi,input-colorspace", &str);
+	if (ret < 0)
+		return ret;
+
+	if (!strcmp(str, "rgb"))
+		config->input_colorspace = HDMI_COLORSPACE_RGB;
+	else if (!strcmp(str, "yuv422"))
+		config->input_colorspace = HDMI_COLORSPACE_YUV422;
+	else if (!strcmp(str, "yuv444"))
+		config->input_colorspace = HDMI_COLORSPACE_YUV444;
+	else
+		return -EINVAL;
+
+	ret = of_property_read_string(np, "adi,input-clock", &str);
+	if (ret < 0)
+		return ret;
+
+	if (!strcmp(str, "1x"))
+		config->input_clock = ADV7511_INPUT_CLOCK_1X;
+	else if (!strcmp(str, "2x"))
+		config->input_clock = ADV7511_INPUT_CLOCK_2X;
+	else if (!strcmp(str, "ddr"))
+		config->input_clock = ADV7511_INPUT_CLOCK_DDR;
+	else
+		return -EINVAL;
+
+	if (config->input_colorspace = HDMI_COLORSPACE_YUV422 ||
+	    config->input_clock != ADV7511_INPUT_CLOCK_1X) {
+		ret = of_property_read_u32(np, "adi,input-style",
+					   &config->input_style);
+		if (ret)
+			return ret;
+
+		if (config->input_style < 1 || config->input_style > 3)
+			return -EINVAL;
+
+		ret = of_property_read_string(np, "adi,input-justification",
+					      &str);
+		if (ret < 0)
+			return ret;
+
+		if (!strcmp(str, "left"))
+			config->input_justification +				ADV7511_INPUT_JUSTIFICATION_LEFT;
+		else if (!strcmp(str, "evenly"))
+			config->input_justification +				ADV7511_INPUT_JUSTIFICATION_EVENLY;
+		else if (!strcmp(str, "right"))
+			config->input_justification +				ADV7511_INPUT_JUSTIFICATION_RIGHT;
+		else
+			return -EINVAL;
+
+	} else {
+		config->input_style = 1;
+		config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT;
+	}
+
+	of_property_read_u32(np, "adi,clock-delay", &config->clock_delay);
+	if (config->clock_delay < -1200 || config->clock_delay > 1600)
+		return -EINVAL;
+
+	config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
+
+	/* Hardcode the sync pulse configurations for now. */
+	config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
+	config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+	config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+
+	return 0;
+}
+
+static const int edid_i2c_addr = 0x7e;
+static const int packet_i2c_addr = 0x70;
+static const int cec_i2c_addr = 0x78;
+
+static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+	struct adv7511_link_config link_config;
+	struct adv7511 *adv7511;
+	struct device *dev = &i2c->dev;
+	unsigned int val;
+	int ret;
+
+	if (!dev->of_node)
+		return -EINVAL;
+
+	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
+	if (!adv7511)
+		return -ENOMEM;
+
+	adv7511->dpms_mode = DRM_MODE_DPMS_OFF;
+	adv7511->status = connector_status_disconnected;
+
+	ret = adv7511_parse_dt(dev->of_node, &link_config);
+	if (ret)
+		return ret;
+
+	/*
+	 * The power down GPIO is optional. If present, toggle it from active to
+	 * inactive to wake up the encoder.
+	 */
+	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
+	if (IS_ERR(adv7511->gpio_pd))
+		return PTR_ERR(adv7511->gpio_pd);
+
+	if (adv7511->gpio_pd) {
+		mdelay(5);
+		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
+	}
+
+	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
+	if (IS_ERR(adv7511->regmap))
+		return PTR_ERR(adv7511->regmap);
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
+	if (ret)
+		return ret;
+	dev_dbg(dev, "Rev. %d\n", val);
+
+	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
+				    ARRAY_SIZE(adv7511_fixed_registers));
+	if (ret)
+		return ret;
+
+	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
+	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
+		     packet_i2c_addr);
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
+	adv7511_packet_disable(adv7511, 0xffff);
+
+	adv7511->i2c_main = i2c;
+	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
+	if (!adv7511->i2c_edid)
+		return -ENOMEM;
+
+	if (i2c->irq) {
+		init_waitqueue_head(&adv7511->wq);
+
+		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
+						adv7511_irq_handler,
+						IRQF_ONESHOT, dev_name(dev),
+						adv7511);
+		if (ret)
+			goto err_i2c_unregister_device;
+	}
+
+	/* CEC is unused for now */
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
+		     ADV7511_CEC_CTRL_POWER_DOWN);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+			   ADV7511_POWER_POWER_DOWN, ADV7511_POWER_POWER_DOWN);
+
+	adv7511->current_edid_segment = -1;
+
+	i2c_set_clientdata(i2c, adv7511);
+
+	adv7511_set_link_config(adv7511, &link_config);
+
+	return 0;
+
+err_i2c_unregister_device:
+	i2c_unregister_device(adv7511->i2c_edid);
+
+	return ret;
+}
+
+static int adv7511_remove(struct i2c_client *i2c)
+{
+	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+	i2c_unregister_device(adv7511->i2c_edid);
+
+	kfree(adv7511->edid);
+
+	return 0;
+}
+
+static int adv7511_encoder_init(struct i2c_client *i2c, struct drm_device *dev,
+				struct drm_encoder_slave *encoder)
+{
+
+	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+	encoder->slave_priv = adv7511;
+	encoder->slave_funcs = &adv7511_encoder_funcs;
+
+	adv7511->encoder = &encoder->base;
+
+	return 0;
+}
+
+static const struct i2c_device_id adv7511_i2c_ids[] = {
+	{ "adv7511", 0 },
+	{ "adv7511w", 0 },
+	{ "adv7513", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
+
+static const struct of_device_id adv7511_of_ids[] = {
+	{ .compatible = "adi,adv7511", },
+	{ .compatible = "adi,adv7511w", },
+	{ .compatible = "adi,adv7513", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adv7511_of_ids);
+
+static struct drm_i2c_encoder_driver adv7511_driver = {
+	.i2c_driver = {
+		.driver = {
+			.name = "adv7511",
+			.of_match_table = adv7511_of_ids,
+		},
+		.id_table = adv7511_i2c_ids,
+		.probe = adv7511_probe,
+		.remove = adv7511_remove,
+	},
+
+	.encoder_init = adv7511_encoder_init,
+};
+
+static int __init adv7511_init(void)
+{
+	return drm_i2c_encoder_register(THIS_MODULE, &adv7511_driver);
+}
+module_init(adv7511_init);
+
+static void __exit adv7511_exit(void)
+{
+	drm_i2c_encoder_unregister(&adv7511_driver);
+}
+module_exit(adv7511_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/i2c/adv7511.h b/drivers/gpu/drm/i2c/adv7511.h
new file mode 100644
index 0000000..6599ed5
--- /dev/null
+++ b/drivers/gpu/drm/i2c/adv7511.h
@@ -0,0 +1,289 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __DRM_I2C_ADV7511_H__
+#define __DRM_I2C_ADV7511_H__
+
+#include <linux/hdmi.h>
+
+#define ADV7511_REG_CHIP_REVISION		0x00
+#define ADV7511_REG_N0				0x01
+#define ADV7511_REG_N1				0x02
+#define ADV7511_REG_N2				0x03
+#define ADV7511_REG_SPDIF_FREQ			0x04
+#define ADV7511_REG_CTS_AUTOMATIC1		0x05
+#define ADV7511_REG_CTS_AUTOMATIC2		0x06
+#define ADV7511_REG_CTS_MANUAL0			0x07
+#define ADV7511_REG_CTS_MANUAL1			0x08
+#define ADV7511_REG_CTS_MANUAL2			0x09
+#define ADV7511_REG_AUDIO_SOURCE		0x0a
+#define ADV7511_REG_AUDIO_CONFIG		0x0b
+#define ADV7511_REG_I2S_CONFIG			0x0c
+#define ADV7511_REG_I2S_WIDTH			0x0d
+#define ADV7511_REG_AUDIO_SUB_SRC0		0x0e
+#define ADV7511_REG_AUDIO_SUB_SRC1		0x0f
+#define ADV7511_REG_AUDIO_SUB_SRC2		0x10
+#define ADV7511_REG_AUDIO_SUB_SRC3		0x11
+#define ADV7511_REG_AUDIO_CFG1			0x12
+#define ADV7511_REG_AUDIO_CFG2			0x13
+#define ADV7511_REG_AUDIO_CFG3			0x14
+#define ADV7511_REG_I2C_FREQ_ID_CFG		0x15
+#define ADV7511_REG_VIDEO_INPUT_CFG1		0x16
+#define ADV7511_REG_CSC_UPPER(x)		(0x18 + (x) * 2)
+#define ADV7511_REG_CSC_LOWER(x)		(0x19 + (x) * 2)
+#define ADV7511_REG_SYNC_DECODER(x)		(0x30 + (x))
+#define ADV7511_REG_DE_GENERATOR		(0x35 + (x))
+#define ADV7511_REG_PIXEL_REPETITION		0x3b
+#define ADV7511_REG_VIC_MANUAL			0x3c
+#define ADV7511_REG_VIC_SEND			0x3d
+#define ADV7511_REG_VIC_DETECTED		0x3e
+#define ADV7511_REG_AUX_VIC_DETECTED		0x3f
+#define ADV7511_REG_PACKET_ENABLE0		0x40
+#define ADV7511_REG_POWER			0x41
+#define ADV7511_REG_STATUS			0x42
+#define ADV7511_REG_EDID_I2C_ADDR		0x43
+#define ADV7511_REG_PACKET_ENABLE1		0x44
+#define ADV7511_REG_PACKET_I2C_ADDR		0x45
+#define ADV7511_REG_DSD_ENABLE			0x46
+#define ADV7511_REG_VIDEO_INPUT_CFG2		0x48
+#define ADV7511_REG_INFOFRAME_UPDATE		0x4a
+#define ADV7511_REG_GC(x)			(0x4b + (x)) /* 0x4b - 0x51 */
+#define ADV7511_REG_AVI_INFOFRAME_VERSION	0x52
+#define ADV7511_REG_AVI_INFOFRAME_LENGTH	0x53
+#define ADV7511_REG_AVI_INFOFRAME_CHECKSUM	0x54
+#define ADV7511_REG_AVI_INFOFRAME(x)		(0x55 + (x)) /* 0x55 - 0x6f */
+#define ADV7511_REG_AUDIO_INFOFRAME_VERSION	0x70
+#define ADV7511_REG_AUDIO_INFOFRAME_LENGTH	0x71
+#define ADV7511_REG_AUDIO_INFOFRAME_CHECKSUM	0x72
+#define ADV7511_REG_AUDIO_INFOFRAME(x)		(0x73 + (x)) /* 0x73 - 0x7c */
+#define ADV7511_REG_INT_ENABLE(x)		(0x94 + (x))
+#define ADV7511_REG_INT(x)			(0x96 + (x))
+#define ADV7511_REG_INPUT_CLK_DIV		0x9d
+#define ADV7511_REG_PLL_STATUS			0x9e
+#define ADV7511_REG_HDMI_POWER			0xa1
+#define ADV7511_REG_HDCP_HDMI_CFG		0xaf
+#define ADV7511_REG_AN(x)			(0xb0 + (x)) /* 0xb0 - 0xb7 */
+#define ADV7511_REG_HDCP_STATUS			0xb8
+#define ADV7511_REG_BCAPS			0xbe
+#define ADV7511_REG_BKSV(x)			(0xc0 + (x)) /* 0xc0 - 0xc3 */
+#define ADV7511_REG_EDID_SEGMENT		0xc4
+#define ADV7511_REG_DDC_STATUS			0xc8
+#define ADV7511_REG_EDID_READ_CTRL		0xc9
+#define ADV7511_REG_BSTATUS(x)			(0xca + (x)) /* 0xca - 0xcb */
+#define ADV7511_REG_TIMING_GEN_SEQ		0xd0
+#define ADV7511_REG_POWER2			0xd6
+#define ADV7511_REG_HSYNC_PLACEMENT_MSB		0xfa
+
+#define ADV7511_REG_SYNC_ADJUSTMENT(x)		(0xd7 + (x)) /* 0xd7 - 0xdc */
+#define ADV7511_REG_TMDS_CLOCK_INV		0xde
+#define ADV7511_REG_ARC_CTRL			0xdf
+#define ADV7511_REG_CEC_I2C_ADDR		0xe1
+#define ADV7511_REG_CEC_CTRL			0xe2
+#define ADV7511_REG_CHIP_ID_HIGH		0xf5
+#define ADV7511_REG_CHIP_ID_LOW			0xf6
+
+#define ADV7511_CSC_ENABLE			BIT(7)
+#define ADV7511_CSC_UPDATE_MODE			BIT(5)
+
+#define ADV7511_INT0_HDP			BIT(7)
+#define ADV7511_INT0_VSYNC			BIT(5)
+#define ADV7511_INT0_AUDIO_FIFO_FULL		BIT(4)
+#define ADV7511_INT0_EDID_READY			BIT(2)
+#define ADV7511_INT0_HDCP_AUTHENTICATED		BIT(1)
+
+#define ADV7511_INT1_DDC_ERROR			BIT(7)
+#define ADV7511_INT1_BKSV			BIT(6)
+#define ADV7511_INT1_CEC_TX_READY		BIT(5)
+#define ADV7511_INT1_CEC_TX_ARBIT_LOST		BIT(4)
+#define ADV7511_INT1_CEC_TX_RETRY_TIMEOUT	BIT(3)
+#define ADV7511_INT1_CEC_RX_READY3		BIT(2)
+#define ADV7511_INT1_CEC_RX_READY2		BIT(1)
+#define ADV7511_INT1_CEC_RX_READY1		BIT(0)
+
+#define ADV7511_ARC_CTRL_POWER_DOWN		BIT(0)
+
+#define ADV7511_CEC_CTRL_POWER_DOWN		BIT(0)
+
+#define ADV7511_POWER_POWER_DOWN		BIT(6)
+
+#define ADV7511_HDMI_CFG_MODE_MASK		0x2
+#define ADV7511_HDMI_CFG_MODE_DVI		0x0
+#define ADV7511_HDMI_CFG_MODE_HDMI		0x2
+
+#define ADV7511_AUDIO_SELECT_I2C		0x0
+#define ADV7511_AUDIO_SELECT_SPDIF		0x1
+#define ADV7511_AUDIO_SELECT_DSD		0x2
+#define ADV7511_AUDIO_SELECT_HBR		0x3
+#define ADV7511_AUDIO_SELECT_DST		0x4
+
+#define ADV7511_I2S_SAMPLE_LEN_16		0x2
+#define ADV7511_I2S_SAMPLE_LEN_20		0x3
+#define ADV7511_I2S_SAMPLE_LEN_18		0x4
+#define ADV7511_I2S_SAMPLE_LEN_22		0x5
+#define ADV7511_I2S_SAMPLE_LEN_19		0x8
+#define ADV7511_I2S_SAMPLE_LEN_23		0x9
+#define ADV7511_I2S_SAMPLE_LEN_24		0xb
+#define ADV7511_I2S_SAMPLE_LEN_17		0xc
+#define ADV7511_I2S_SAMPLE_LEN_21		0xd
+
+#define ADV7511_SAMPLE_FREQ_44100		0x0
+#define ADV7511_SAMPLE_FREQ_48000		0x2
+#define ADV7511_SAMPLE_FREQ_32000		0x3
+#define ADV7511_SAMPLE_FREQ_88200		0x8
+#define ADV7511_SAMPLE_FREQ_96000		0xa
+#define ADV7511_SAMPLE_FREQ_176400		0xc
+#define ADV7511_SAMPLE_FREQ_192000		0xe
+
+#define ADV7511_STATUS_POWER_DOWN_POLARITY	BIT(7)
+#define ADV7511_STATUS_HPD			BIT(6)
+#define ADV7511_STATUS_MONITOR_SENSE		BIT(5)
+#define ADV7511_STATUS_I2S_32BIT_MODE		BIT(3)
+
+#define ADV7511_PACKET_ENABLE_N_CTS		BIT(8+6)
+#define ADV7511_PACKET_ENABLE_AUDIO_SAMPLE	BIT(8+5)
+#define ADV7511_PACKET_ENABLE_AVI_INFOFRAME	BIT(8+4)
+#define ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME	BIT(8+3)
+#define ADV7511_PACKET_ENABLE_GC		BIT(7)
+#define ADV7511_PACKET_ENABLE_SPD		BIT(6)
+#define ADV7511_PACKET_ENABLE_MPEG		BIT(5)
+#define ADV7511_PACKET_ENABLE_ACP		BIT(4)
+#define ADV7511_PACKET_ENABLE_ISRC		BIT(3)
+#define ADV7511_PACKET_ENABLE_GM		BIT(2)
+#define ADV7511_PACKET_ENABLE_SPARE2		BIT(1)
+#define ADV7511_PACKET_ENABLE_SPARE1		BIT(0)
+
+#define ADV7511_REG_POWER2_HDP_SRC_MASK		0xc0
+#define ADV7511_REG_POWER2_HDP_SRC_BOTH		0x00
+#define ADV7511_REG_POWER2_HDP_SRC_HDP		0x40
+#define ADV7511_REG_POWER2_HDP_SRC_CEC		0x80
+#define ADV7511_REG_POWER2_HDP_SRC_NONE		0xc0
+#define ADV7511_REG_POWER2_TDMS_ENABLE		BIT(4)
+#define ADV7511_REG_POWER2_GATE_INPUT_CLK	BIT(0)
+
+#define ADV7511_LOW_REFRESH_RATE_NONE		0x0
+#define ADV7511_LOW_REFRESH_RATE_24HZ		0x1
+#define ADV7511_LOW_REFRESH_RATE_25HZ		0x2
+#define ADV7511_LOW_REFRESH_RATE_30HZ		0x3
+
+#define ADV7511_AUDIO_CFG3_LEN_MASK		0x0f
+#define ADV7511_I2C_FREQ_ID_CFG_RATE_MASK	0xf0
+
+#define ADV7511_AUDIO_SOURCE_I2S		0
+#define ADV7511_AUDIO_SOURCE_SPDIF		1
+
+#define ADV7511_I2S_FORMAT_I2S			0
+#define ADV7511_I2S_FORMAT_RIGHT_J		1
+#define ADV7511_I2S_FORMAT_LEFT_J		2
+
+#define ADV7511_PACKET(p, x)	    ((p) * 0x20 + (x))
+#define ADV7511_PACKET_SDP(x)	    ADV7511_PACKET(0, x)
+#define ADV7511_PACKET_MPEG(x)	    ADV7511_PACKET(1, x)
+#define ADV7511_PACKET_ACP(x)	    ADV7511_PACKET(2, x)
+#define ADV7511_PACKET_ISRC1(x)	    ADV7511_PACKET(3, x)
+#define ADV7511_PACKET_ISRC2(x)	    ADV7511_PACKET(4, x)
+#define ADV7511_PACKET_GM(x)	    ADV7511_PACKET(5, x)
+#define ADV7511_PACKET_SPARE(x)	    ADV7511_PACKET(6, x)
+
+enum adv7511_input_clock {
+	ADV7511_INPUT_CLOCK_1X,
+	ADV7511_INPUT_CLOCK_2X,
+	ADV7511_INPUT_CLOCK_DDR,
+};
+
+enum adv7511_input_justification {
+	ADV7511_INPUT_JUSTIFICATION_EVENLY = 0,
+	ADV7511_INPUT_JUSTIFICATION_RIGHT = 1,
+	ADV7511_INPUT_JUSTIFICATION_LEFT = 2,
+};
+
+enum adv7511_input_sync_pulse {
+	ADV7511_INPUT_SYNC_PULSE_DE = 0,
+	ADV7511_INPUT_SYNC_PULSE_HSYNC = 1,
+	ADV7511_INPUT_SYNC_PULSE_VSYNC = 2,
+	ADV7511_INPUT_SYNC_PULSE_NONE = 3,
+};
+
+/**
+ * enum adv7511_sync_polarity - Polarity for the input sync signals
+ * @ADV7511_SYNC_POLARITY_PASSTHROUGH:  Sync polarity matches that of
+ *				       the currently configured mode.
+ * @ADV7511_SYNC_POLARITY_LOW:	    Sync polarity is low
+ * @ADV7511_SYNC_POLARITY_HIGH:	    Sync polarity is high
+ *
+ * If the polarity is set to either LOW or HIGH the driver will configure the
+ * ADV7511 to internally invert the sync signal if required to match the sync
+ * polarity setting for the currently selected output mode.
+ *
+ * If the polarity is set to PASSTHROUGH, the ADV7511 will route the signal
+ * unchanged. This is used when the upstream graphics core already generates
+ * the sync signals with the correct polarity.
+ */
+enum adv7511_sync_polarity {
+	ADV7511_SYNC_POLARITY_PASSTHROUGH,
+	ADV7511_SYNC_POLARITY_LOW,
+	ADV7511_SYNC_POLARITY_HIGH,
+};
+
+/**
+ * struct adv7511_link_config - Describes adv7511 hardware configuration
+ * @input_color_depth:		Number of bits per color component (8, 10 or 12)
+ * @input_colorspace:		The input colorspace (RGB, YUV444, YUV422)
+ * @input_clock:		The input video clock style (1x, 2x, DDR)
+ * @input_style:		The input component arrangement variant
+ * @input_justification:	Video input format bit justification
+ * @clock_delay:		Clock delay for the input clock (in ps)
+ * @embedded_sync:		Video input uses BT.656-style embedded sync
+ * @sync_pulse:			Select the sync pulse
+ * @vsync_polarity:		vsync input signal configuration
+ * @hsync_polarity:		hsync input signal configuration
+ */
+struct adv7511_link_config {
+	unsigned int input_color_depth;
+	enum hdmi_colorspace input_colorspace;
+	enum adv7511_input_clock input_clock;
+	unsigned int input_style;
+	enum adv7511_input_justification input_justification;
+
+	int clock_delay;
+
+	bool embedded_sync;
+	enum adv7511_input_sync_pulse sync_pulse;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+};
+
+/**
+ * enum adv7511_csc_scaling - Scaling factor for the ADV7511 CSC
+ * @ADV7511_CSC_SCALING_1: CSC results are not scaled
+ * @ADV7511_CSC_SCALING_2: CSC results are scaled by a factor of two
+ * @ADV7511_CSC_SCALING_4: CSC results are scalled by a factor of four
+ */
+enum adv7511_csc_scaling {
+	ADV7511_CSC_SCALING_1 = 0,
+	ADV7511_CSC_SCALING_2 = 1,
+	ADV7511_CSC_SCALING_4 = 2,
+};
+
+/**
+ * struct adv7511_video_config - Describes adv7511 hardware configuration
+ * @csc_enable:			Whether to enable color space conversion
+ * @csc_scaling_factor:		Color space conversion scaling factor
+ * @csc_coefficents:		Color space conversion coefficents
+ * @hdmi_mode:			Whether to use HDMI or DVI output mode
+ * @avi_infoframe:		HDMI infoframe
+ */
+struct adv7511_video_config {
+	bool csc_enable;
+	enum adv7511_csc_scaling csc_scaling_factor;
+	const uint16_t *csc_coefficents;
+
+	bool hdmi_mode;
+	struct hdmi_avi_infoframe avi_infoframe;
+};
+
+#endif /* __DRM_I2C_ADV7511_H__ */
-- 
1.8.5.5


WARNING: multiple messages have this Message-ID (diff)
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: linux-sh@vger.kernel.org
Subject: [PATCH 11/12] drm: Add adv7511 encoder driver
Date: Wed, 24 Sep 2014 23:04:31 +0300	[thread overview]
Message-ID: <1411589072-28609-12-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)
In-Reply-To: <1411589072-28609-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com>

From: Lars-Peter Clausen <lars@metafoo.de>

This patch adds a driver for the Analog Devices adv7511. The adv7511 is
a standalone HDMI transmitter chip. It features a HDMI output interface
on one end and video and audio input interfaces on the other.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

---

This commit incorporates the following commits.

DRM: adv7511: Sync to latest version
DRM: adv7511: Fix calculation and setting of CTS
DRM: adv7511: Write status word frequency and word len registers
adv7511: Remove some debug printks
Merge branch 'xcomm_zynq' into xcomm_zynq_3_5
Sync adv7511 and axi-hdmi driver to latest version
drm:adv7511: Re-add module information
DRM: adv7511: Don't use raw_edid to pass edid data
drm: adv7511: Ignore the csc scaling factor when the csc is disabled
drm: adv7511: Check if edid is NULL before duplicating it
drm: adv7511: Include the extension sections when duplicating the edid
DRM: adv7511: Work around off-by-one hardware bug
DRM: adv7511: Make embedded sync generator setup more robust
DRM: adv7511_audio: Fix typo
DRM: adv7511: Add powerdown gpio support
drm: adv7511: Fix use after free
DRM: adv7511: Properly initialize dpms_mode and status
DRM: adv7511: Avoid uneccessary disconnected events
drm: adv7511: Fix adv7511 encoder driver
drm: adv7511: Fix kernel-doc format
drm: adv7511: Fix adv7511_parse_dt()
drm: adv7511: Add the rgb format flag to adv7511_link_config
drm: adv7511: Configure CSC in adv7511_set_config()
drm: adv7511: Add adv7511_set_config_csc()
drm: adv7511: Configure the csc when getting modes
drm: adv7511: Add adv7511_encoder_mode_valid() function
drm: adv7511: Don't export adv7511_get_edid function
drm: adv7511: Mark the revision register as volatile
drm: adv7511: Initialize work queue before requesting IRQ
drm: adv7511: Remove trailing whitespaces
drm: adv7511: Remove audio support
drm: adv7511: Remove DRM slave encoder .set_config operation
drm: adv7511: Make the adv7511_packet_(enable|disable) functions static
drm: adv7511: Move Kconfig entry to drivers/gpu/drm/i2c/Kconfig
drm: adv7511: Update to the latest DRM API
drm: adv7511: Rename driver source file to adv7511.c
drm: adv7511: Add OF match table
drm: adv7511: Add ADV7513 support
drm: adv7511: Remove platform data support
drm: adv7511: Convert to the gpiod API
drm: adv7511: Remove packet and CEC I2C device support
drm: adv7511: Use the devm_ managed IRQ API
drm: adv7511: Remove unneeded local variable initialization
drm: adv7511: Pass the adv7511 pointer to adv7511_get_edid_block
drm: adv7511: Make loop counter unsigned
drm: adv7511: Pass adv7511 pointer to adv7511_set_config_csc function
drm: adv7511: Reorganize the code in sections
drm: adv7511: Simplify DT bindings
---
 drivers/gpu/drm/i2c/Kconfig   |    6 +
 drivers/gpu/drm/i2c/Makefile  |    2 +
 drivers/gpu/drm/i2c/adv7511.c | 1007 +++++++++++++++++++++++++++++++++++++++++
 drivers/gpu/drm/i2c/adv7511.h |  289 ++++++++++++
 4 files changed, 1304 insertions(+)
 create mode 100644 drivers/gpu/drm/i2c/adv7511.c
 create mode 100644 drivers/gpu/drm/i2c/adv7511.h

diff --git a/drivers/gpu/drm/i2c/Kconfig b/drivers/gpu/drm/i2c/Kconfig
index 4d341db..22c7ed6 100644
--- a/drivers/gpu/drm/i2c/Kconfig
+++ b/drivers/gpu/drm/i2c/Kconfig
@@ -1,6 +1,12 @@
 menu "I2C encoder or helper chips"
      depends on DRM && DRM_KMS_HELPER && I2C
 
+config DRM_I2C_ADV7511
+	tristate "AV7511 encoder"
+	select REGMAP_I2C
+	help
+	  Support for the Analog Device ADV7511(W) and ADV7513 HDMI encoders.
+
 config DRM_I2C_CH7006
 	tristate "Chrontel ch7006 TV encoder"
 	default m if DRM_NOUVEAU
diff --git a/drivers/gpu/drm/i2c/Makefile b/drivers/gpu/drm/i2c/Makefile
index 43aa33b..2c72eb5 100644
--- a/drivers/gpu/drm/i2c/Makefile
+++ b/drivers/gpu/drm/i2c/Makefile
@@ -1,5 +1,7 @@
 ccflags-y := -Iinclude/drm
 
+obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511.o
+
 ch7006-y := ch7006_drv.o ch7006_mode.o
 obj-$(CONFIG_DRM_I2C_CH7006) += ch7006.o
 
diff --git a/drivers/gpu/drm/i2c/adv7511.c b/drivers/gpu/drm/i2c/adv7511.c
new file mode 100644
index 0000000..0a61a17
--- /dev/null
+++ b/drivers/gpu/drm/i2c/adv7511.c
@@ -0,0 +1,1007 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_encoder_slave.h>
+
+#include "adv7511.h"
+
+struct adv7511 {
+	struct i2c_client *i2c_main;
+	struct i2c_client *i2c_edid;
+
+	struct regmap *regmap;
+	struct regmap *packet_memory_regmap;
+	enum drm_connector_status status;
+	int dpms_mode;
+
+	unsigned int f_tmds;
+
+	unsigned int current_edid_segment;
+	uint8_t edid_buf[256];
+
+	wait_queue_head_t wq;
+	struct drm_encoder *encoder;
+
+	bool embedded_sync;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+	bool rgb;
+
+	struct edid *edid;
+
+	struct gpio_desc *gpio_pd;
+};
+
+static struct adv7511 *encoder_to_adv7511(struct drm_encoder *encoder)
+{
+	return to_encoder_slave(encoder)->slave_priv;
+}
+
+/* ADI recommanded values for proper operation. */
+static const struct reg_default adv7511_fixed_registers[] = {
+	{ 0x98, 0x03 },
+	{ 0x9a, 0xe0 },
+	{ 0x9c, 0x30 },
+	{ 0x9d, 0x61 },
+	{ 0xa2, 0xa4 },
+	{ 0xa3, 0xa4 },
+	{ 0xe0, 0xd0 },
+	{ 0xf9, 0x00 },
+	{ 0x55, 0x02 },
+};
+
+/* -----------------------------------------------------------------------------
+ * Register access
+ */
+
+static const uint8_t adv7511_register_defaults[] = {
+	0x12, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00 */
+	0x00, 0x00, 0x01, 0x0e, 0xbc, 0x18, 0x01, 0x13,
+	0x25, 0x37, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10 */
+	0x46, 0x62, 0x04, 0xa8, 0x00, 0x00, 0x1c, 0x84,
+	0x1c, 0xbf, 0x04, 0xa8, 0x1e, 0x70, 0x02, 0x1e, /* 20 */
+	0x00, 0x00, 0x04, 0xa8, 0x08, 0x12, 0x1b, 0xac,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 30 */
+	0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xb0,
+	0x00, 0x50, 0x90, 0x7e, 0x79, 0x70, 0x00, 0x00, /* 40 */
+	0x00, 0xa8, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x02, 0x0d, 0x00, 0x00, 0x00, 0x00, /* 50 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 60 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x01, 0x0a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 70 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 80 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0xc0, 0x00, 0x00, 0x00, /* 90 */
+	0x0b, 0x02, 0x00, 0x18, 0x5a, 0x60, 0x00, 0x00,
+	0x00, 0x00, 0x80, 0x80, 0x08, 0x04, 0x00, 0x00, /* a0 */
+	0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x14,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* b0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* c0 */
+	0x00, 0x03, 0x00, 0x00, 0x02, 0x00, 0x01, 0x04,
+	0x30, 0xff, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, /* d0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x01,
+	0x80, 0x75, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, /* e0 */
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x75, 0x11, 0x00, /* f0 */
+	0x00, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+};
+
+static bool adv7511_register_volatile(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case ADV7511_REG_CHIP_REVISION:
+	case ADV7511_REG_SPDIF_FREQ:
+	case ADV7511_REG_CTS_AUTOMATIC1:
+	case ADV7511_REG_CTS_AUTOMATIC2:
+	case ADV7511_REG_VIC_DETECTED:
+	case ADV7511_REG_VIC_SEND:
+	case ADV7511_REG_AUX_VIC_DETECTED:
+	case ADV7511_REG_STATUS:
+	case ADV7511_REG_GC(1):
+	case ADV7511_REG_INT(0):
+	case ADV7511_REG_INT(1):
+	case ADV7511_REG_PLL_STATUS:
+	case ADV7511_REG_AN(0):
+	case ADV7511_REG_AN(1):
+	case ADV7511_REG_AN(2):
+	case ADV7511_REG_AN(3):
+	case ADV7511_REG_AN(4):
+	case ADV7511_REG_AN(5):
+	case ADV7511_REG_AN(6):
+	case ADV7511_REG_AN(7):
+	case ADV7511_REG_HDCP_STATUS:
+	case ADV7511_REG_BCAPS:
+	case ADV7511_REG_BKSV(0):
+	case ADV7511_REG_BKSV(1):
+	case ADV7511_REG_BKSV(2):
+	case ADV7511_REG_BKSV(3):
+	case ADV7511_REG_BKSV(4):
+	case ADV7511_REG_DDC_STATUS:
+	case ADV7511_REG_BSTATUS(0):
+	case ADV7511_REG_BSTATUS(1):
+	case ADV7511_REG_CHIP_ID_HIGH:
+	case ADV7511_REG_CHIP_ID_LOW:
+		return true;
+	}
+
+	return false;
+}
+
+static const struct regmap_config adv7511_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = 0xff,
+	.cache_type = REGCACHE_RBTREE,
+	.reg_defaults_raw = adv7511_register_defaults,
+	.num_reg_defaults_raw = ARRAY_SIZE(adv7511_register_defaults),
+
+	.volatile_reg = adv7511_register_volatile,
+};
+
+/* -----------------------------------------------------------------------------
+ * Hardware configuration
+ */
+
+static void adv7511_set_colormap(struct adv7511 *adv7511, bool enable,
+				 const uint16_t *coeff,
+				 unsigned int scaling_factor)
+{
+	unsigned int i;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+			   ADV7511_CSC_UPDATE_MODE, ADV7511_CSC_UPDATE_MODE);
+
+	if (enable) {
+		for (i = 0; i < 12; ++i) {
+			regmap_update_bits(adv7511->regmap,
+					   ADV7511_REG_CSC_UPPER(i),
+					   0x1f, coeff[i] >> 8);
+			regmap_write(adv7511->regmap,
+				     ADV7511_REG_CSC_LOWER(i),
+				     coeff[i] & 0xff);
+		}
+	}
+
+	if (enable)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+				   0xe0, 0x80 | (scaling_factor << 5));
+	else
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(0),
+				   0x80, 0x00);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_CSC_UPPER(1),
+			   ADV7511_CSC_UPDATE_MODE, 0);
+}
+
+static int adv7511_packet_enable(struct adv7511 *adv7511, unsigned int packet)
+{
+	if (packet & 0xff)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+				   packet, 0xff);
+
+	if (packet & 0xff00) {
+		packet >>= 8;
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				   packet, 0xff);
+	}
+
+	return 0;
+}
+
+static int adv7511_packet_disable(struct adv7511 *adv7511, unsigned int packet)
+{
+	if (packet & 0xff)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE0,
+				   packet, 0x00);
+
+	if (packet & 0xff00) {
+		packet >>= 8;
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_PACKET_ENABLE1,
+				   packet, 0x00);
+	}
+
+	return 0;
+}
+
+/* Coefficients for adv7511 color space conversion */
+static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
+	0x0734, 0x04ad, 0x0000, 0x1c1b,
+	0x1ddc, 0x04ad, 0x1f24, 0x0135,
+	0x0000, 0x04ad, 0x087c, 0x1b77,
+};
+
+static void adv7511_set_config_csc(struct adv7511 *adv7511,
+				   struct drm_connector *connector,
+				   bool rgb)
+{
+	struct adv7511_video_config config;
+	bool output_format_422, output_format_ycbcr;
+	unsigned int mode;
+	uint8_t infoframe[17];
+
+	if (adv7511->edid)
+		config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
+	else
+		config.hdmi_mode = false;
+
+	hdmi_avi_infoframe_init(&config.avi_infoframe);
+
+	config.avi_infoframe.scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
+
+	if (rgb) {
+		config.csc_enable = false;
+		config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+	} else {
+		config.csc_scaling_factor = ADV7511_CSC_SCALING_4;
+		config.csc_coefficents = adv7511_csc_ycbcr_to_rgb;
+
+		if ((connector->display_info.color_formats &
+		     DRM_COLOR_FORMAT_YCRCB422) &&
+		    config.hdmi_mode) {
+			config.csc_enable = false;
+			config.avi_infoframe.colorspace =
+				HDMI_COLORSPACE_YUV422;
+		} else {
+			config.csc_enable = true;
+			config.avi_infoframe.colorspace = HDMI_COLORSPACE_RGB;
+		}
+	}
+
+	if (config.hdmi_mode) {
+		mode = ADV7511_HDMI_CFG_MODE_HDMI;
+
+		switch (config.avi_infoframe.colorspace) {
+		case HDMI_COLORSPACE_YUV444:
+			output_format_422 = false;
+			output_format_ycbcr = true;
+			break;
+		case HDMI_COLORSPACE_YUV422:
+			output_format_422 = true;
+			output_format_ycbcr = true;
+			break;
+		default:
+			output_format_422 = false;
+			output_format_ycbcr = false;
+			break;
+		}
+	} else {
+		mode = ADV7511_HDMI_CFG_MODE_DVI;
+		output_format_422 = false;
+		output_format_ycbcr = false;
+	}
+
+	adv7511_packet_disable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+
+	adv7511_set_colormap(adv7511, config.csc_enable,
+			     config.csc_coefficents,
+			     config.csc_scaling_factor);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x81,
+			   (output_format_422 << 7) | output_format_ycbcr);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_HDCP_HDMI_CFG,
+			   ADV7511_HDMI_CFG_MODE_MASK, mode);
+
+	hdmi_avi_infoframe_pack(&config.avi_infoframe, infoframe,
+				sizeof(infoframe));
+
+	/* The AVI infoframe id is not configurable */
+	regmap_bulk_write(adv7511->regmap, ADV7511_REG_AVI_INFOFRAME_VERSION,
+			  infoframe + 1, sizeof(infoframe) - 1);
+
+	adv7511_packet_enable(adv7511, ADV7511_PACKET_ENABLE_AVI_INFOFRAME);
+}
+
+static void adv7511_set_link_config(struct adv7511 *adv7511,
+				    const struct adv7511_link_config *config)
+{
+	unsigned int clock_delay;
+	unsigned int color_depth;
+	unsigned int input_style;
+	unsigned int input_id;
+
+	clock_delay = (config->clock_delay + 1200) / 400;
+	color_depth = config->input_color_depth == 8 ? 3
+		    : (config->input_color_depth == 10 ? 1 : 2);
+
+	input_style = config->input_style == 1 ? 2
+		    : (config->input_style == 2 ? 1 : 3);
+
+	/* TODO Support input ID 6 */
+	if (config->input_colorspace != HDMI_COLORSPACE_YUV422)
+		input_id = config->input_clock == ADV7511_INPUT_CLOCK_DDR
+			 ? 5 : 0;
+	else if (config->input_clock == ADV7511_INPUT_CLOCK_DDR)
+		input_id = config->embedded_sync ? 8 : 7;
+	else if (config->input_clock == ADV7511_INPUT_CLOCK_2X)
+		input_id = config->embedded_sync ? 4 : 3;
+	else
+		input_id = config->embedded_sync ? 2 : 1;
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG, 0xf,
+			   input_id);
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG1, 0x7e,
+			   (color_depth << 4) | (input_style << 2));
+	regmap_write(adv7511->regmap, ADV7511_REG_VIDEO_INPUT_CFG2,
+		     config->input_justification << 3);
+	regmap_write(adv7511->regmap, ADV7511_REG_TIMING_GEN_SEQ,
+		     config->sync_pulse << 2);
+
+	regmap_write(adv7511->regmap, 0xba, clock_delay << 5);
+
+	adv7511->embedded_sync = config->embedded_sync;
+	adv7511->hsync_polarity = config->hsync_polarity;
+	adv7511->vsync_polarity = config->vsync_polarity;
+	adv7511->rgb = config->input_colorspace == HDMI_COLORSPACE_RGB;
+}
+
+/* -----------------------------------------------------------------------------
+ * Interrupt and hotplug detection
+ */
+
+static bool adv7511_hpd(struct adv7511 *adv7511)
+{
+	unsigned int irq0;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+	if (ret < 0)
+		return false;
+
+	if (irq0 & ADV7511_INT0_HDP) {
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_HDP);
+		return true;
+	}
+
+	return false;
+}
+
+static irqreturn_t adv7511_irq_handler(int irq, void *devid)
+{
+	struct adv7511 *adv7511 = devid;
+
+	if (adv7511_hpd(adv7511))
+		drm_helper_hpd_irq_event(adv7511->encoder->dev);
+
+	wake_up_all(&adv7511->wq);
+
+	return IRQ_HANDLED;
+}
+
+static unsigned int adv7511_is_interrupt_pending(struct adv7511 *adv7511,
+						 unsigned int irq)
+{
+	unsigned int irq0, irq1;
+	unsigned int pending;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(0), &irq0);
+	if (ret < 0)
+		return 0;
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_INT(1), &irq1);
+	if (ret < 0)
+		return 0;
+
+	pending = (irq1 << 8) | irq0;
+
+	return pending & irq;
+}
+
+static int adv7511_wait_for_interrupt(struct adv7511 *adv7511, int irq,
+				      int timeout)
+{
+	unsigned int pending;
+	int ret;
+
+	if (adv7511->i2c_main->irq) {
+		ret = wait_event_interruptible_timeout(adv7511->wq,
+				adv7511_is_interrupt_pending(adv7511, irq),
+				msecs_to_jiffies(timeout));
+		if (ret <= 0)
+			return 0;
+		pending = adv7511_is_interrupt_pending(adv7511, irq);
+	} else {
+		if (timeout < 25)
+			timeout = 25;
+		do {
+			pending = adv7511_is_interrupt_pending(adv7511, irq);
+			if (pending)
+				break;
+			msleep(25);
+			timeout -= 25;
+		} while (timeout >= 25);
+	}
+
+	return pending;
+}
+
+/* -----------------------------------------------------------------------------
+ * EDID retrieval
+ */
+
+static int adv7511_get_edid_block(void *data, u8 *buf, unsigned int block,
+				  size_t len)
+{
+	struct adv7511 *adv7511 = data;
+	struct i2c_msg xfer[2];
+	uint8_t offset;
+	unsigned int i;
+	int ret;
+
+	if (len > 128)
+		return -EINVAL;
+
+	if (adv7511->current_edid_segment != block / 2) {
+		unsigned int status;
+
+		ret = regmap_read(adv7511->regmap, ADV7511_REG_DDC_STATUS,
+				  &status);
+		if (ret < 0)
+			return ret;
+
+		if (status != 2) {
+			regmap_write(adv7511->regmap, ADV7511_REG_EDID_SEGMENT,
+				     block);
+			ret = adv7511_wait_for_interrupt(adv7511,
+					ADV7511_INT0_EDID_READY |
+					ADV7511_INT1_DDC_ERROR, 200);
+
+			if (!(ret & ADV7511_INT0_EDID_READY))
+				return -EIO;
+		}
+
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+
+		/* Break this apart, hopefully more I2C controllers will
+		 * support 64 byte transfers than 256 byte transfers
+		 */
+
+		xfer[0].addr = adv7511->i2c_edid->addr;
+		xfer[0].flags = 0;
+		xfer[0].len = 1;
+		xfer[0].buf = &offset;
+		xfer[1].addr = adv7511->i2c_edid->addr;
+		xfer[1].flags = I2C_M_RD;
+		xfer[1].len = 64;
+		xfer[1].buf = adv7511->edid_buf;
+
+		offset = 0;
+
+		for (i = 0; i < 4; ++i) {
+			ret = i2c_transfer(adv7511->i2c_edid->adapter, xfer,
+					   ARRAY_SIZE(xfer));
+			if (ret < 0)
+				return ret;
+			else if (ret != 2)
+				return -EIO;
+
+			xfer[1].buf += 64;
+			offset += 64;
+		}
+
+		adv7511->current_edid_segment = block / 2;
+	}
+
+	if (block % 2 == 0)
+		memcpy(buf, adv7511->edid_buf, len);
+	else
+		memcpy(buf, adv7511->edid_buf + 128, len);
+
+	return 0;
+}
+
+/* -----------------------------------------------------------------------------
+ * Encoder operations
+ */
+
+static int adv7511_get_modes(struct drm_encoder *encoder,
+			     struct drm_connector *connector)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+	struct edid *edid;
+	unsigned int count;
+
+	/* Reading the EDID only works if the device is powered */
+	if (adv7511->dpms_mode != DRM_MODE_DPMS_ON) {
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN, 0);
+		adv7511->current_edid_segment = -1;
+	}
+
+	edid = drm_do_get_edid(connector, adv7511_get_edid_block, adv7511);
+
+	if (adv7511->dpms_mode != DRM_MODE_DPMS_ON)
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN,
+				   ADV7511_POWER_POWER_DOWN);
+
+	kfree(adv7511->edid);
+	adv7511->edid = edid;
+	if (!edid)
+		return 0;
+
+	drm_mode_connector_update_edid_property(connector, edid);
+	count = drm_add_edid_modes(connector, edid);
+
+	adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
+
+	return count;
+}
+
+static void adv7511_encoder_dpms(struct drm_encoder *encoder, int mode)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+		adv7511->current_edid_segment = -1;
+
+		regmap_write(adv7511->regmap, ADV7511_REG_INT(0),
+			     ADV7511_INT0_EDID_READY | ADV7511_INT1_DDC_ERROR);
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN, 0);
+		/*
+		 * Per spec it is allowed to pulse the HDP signal to indicate
+		 * that the EDID information has changed. Some monitors do this
+		 * when they wakeup from standby or are enabled. When the HDP
+		 * goes low the adv7511 is reset and the outputs are disabled
+		 * which might cause the monitor to go to standby again. To
+		 * avoid this we ignore the HDP pin for the first few seconds
+		 * after enabeling the output.
+		 */
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+				   ADV7511_REG_POWER2_HDP_SRC_MASK,
+				   ADV7511_REG_POWER2_HDP_SRC_NONE);
+		/* Most of the registers are reset during power down or
+		 * when HPD is low
+		 */
+		regcache_sync(adv7511->regmap);
+		break;
+	default:
+		/* TODO: setup additional power down modes */
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+				   ADV7511_POWER_POWER_DOWN,
+				   ADV7511_POWER_POWER_DOWN);
+		regcache_mark_dirty(adv7511->regmap);
+		break;
+	}
+
+	adv7511->dpms_mode = mode;
+}
+
+static enum drm_connector_status
+adv7511_encoder_detect(struct drm_encoder *encoder,
+		       struct drm_connector *connector)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+	enum drm_connector_status status;
+	unsigned int val;
+	bool hpd;
+	int ret;
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_STATUS, &val);
+	if (ret < 0)
+		return connector_status_disconnected;
+
+	if (val & ADV7511_STATUS_HPD)
+		status = connector_status_connected;
+	else
+		status = connector_status_disconnected;
+
+	hpd = adv7511_hpd(adv7511);
+
+	/* The chip resets itself when the cable is disconnected, so in case
+	 * there is a pending HPD interrupt and the cable is connected there was
+	 * at least one transition from disconnected to connected and the chip
+	 * has to be reinitialized. */
+	if (status == connector_status_connected && hpd &&
+	    adv7511->dpms_mode == DRM_MODE_DPMS_ON) {
+		regcache_mark_dirty(adv7511->regmap);
+		adv7511_encoder_dpms(encoder, adv7511->dpms_mode);
+		adv7511_get_modes(encoder, connector);
+		if (adv7511->status == connector_status_connected)
+			status = connector_status_disconnected;
+	} else {
+		/* Renable HDP sensing */
+		regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER2,
+				   ADV7511_REG_POWER2_HDP_SRC_MASK,
+				   ADV7511_REG_POWER2_HDP_SRC_BOTH);
+	}
+
+	adv7511->status = status;
+	return status;
+}
+
+static int adv7511_encoder_mode_valid(struct drm_encoder *encoder,
+				      struct drm_display_mode *mode)
+{
+	if (mode->clock > 165000)
+		return MODE_CLOCK_HIGH;
+
+	if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+		return MODE_NO_INTERLACE;
+
+	return MODE_OK;
+}
+
+static void adv7511_encoder_mode_set(struct drm_encoder *encoder,
+				     struct drm_display_mode *mode,
+				     struct drm_display_mode *adj_mode)
+{
+	struct adv7511 *adv7511 = encoder_to_adv7511(encoder);
+	unsigned int low_refresh_rate;
+	unsigned int hsync_polarity = 0;
+	unsigned int vsync_polarity = 0;
+
+	if (adv7511->embedded_sync) {
+		unsigned int hsync_offset, hsync_len;
+		unsigned int vsync_offset, vsync_len;
+
+		hsync_offset = adj_mode->crtc_hsync_start -
+			       adj_mode->crtc_hdisplay;
+		vsync_offset = adj_mode->crtc_vsync_start -
+			       adj_mode->crtc_vdisplay;
+		hsync_len = adj_mode->crtc_hsync_end -
+			    adj_mode->crtc_hsync_start;
+		vsync_len = adj_mode->crtc_vsync_end -
+			    adj_mode->crtc_vsync_start;
+
+		/* The hardware vsync generator has a off-by-one bug */
+		vsync_offset += 1;
+
+		regmap_write(adv7511->regmap, ADV7511_REG_HSYNC_PLACEMENT_MSB,
+			     ((hsync_offset >> 10) & 0x7) << 5);
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(0),
+			     (hsync_offset >> 2) & 0xff);
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(1),
+			     ((hsync_offset & 0x3) << 6) |
+			     ((hsync_len >> 4) & 0x3f));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(2),
+			     ((hsync_len & 0xf) << 4) |
+			     ((vsync_offset >> 6) & 0xf));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(3),
+			     ((vsync_offset & 0x3f) << 2) |
+			     ((vsync_len >> 8) & 0x3));
+		regmap_write(adv7511->regmap, ADV7511_REG_SYNC_DECODER(4),
+			     vsync_len & 0xff);
+
+		hsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PHSYNC);
+		vsync_polarity = !(adj_mode->flags & DRM_MODE_FLAG_PVSYNC);
+	} else {
+		enum adv7511_sync_polarity mode_hsync_polarity;
+		enum adv7511_sync_polarity mode_vsync_polarity;
+
+		/**
+		 * If the input signal is always low or always high we want to
+		 * invert or let it passthrough depending on the polarity of the
+		 * current mode.
+		 **/
+		if (adj_mode->flags & DRM_MODE_FLAG_NHSYNC)
+			mode_hsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+		else
+			mode_hsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+		if (adj_mode->flags & DRM_MODE_FLAG_NVSYNC)
+			mode_vsync_polarity = ADV7511_SYNC_POLARITY_LOW;
+		else
+			mode_vsync_polarity = ADV7511_SYNC_POLARITY_HIGH;
+
+		if (adv7511->hsync_polarity != mode_hsync_polarity &&
+		    adv7511->hsync_polarity !=
+		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
+			hsync_polarity = 1;
+
+		if (adv7511->vsync_polarity != mode_vsync_polarity &&
+		    adv7511->vsync_polarity !=
+		    ADV7511_SYNC_POLARITY_PASSTHROUGH)
+			vsync_polarity = 1;
+	}
+
+	if (mode->vrefresh <= 24000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_24HZ;
+	else if (mode->vrefresh <= 25000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_25HZ;
+	else if (mode->vrefresh <= 30000)
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_30HZ;
+	else
+		low_refresh_rate = ADV7511_LOW_REFRESH_RATE_NONE;
+
+	regmap_update_bits(adv7511->regmap, 0xfb,
+		0x6, low_refresh_rate << 1);
+	regmap_update_bits(adv7511->regmap, 0x17,
+		0x60, (vsync_polarity << 6) | (hsync_polarity << 5));
+
+	/*
+	 * TODO Test first order 4:2:2 to 4:4:4 up conversion method, which is
+	 * supposed to give better results.
+	 */
+
+	adv7511->f_tmds = mode->clock;
+}
+
+static struct drm_encoder_slave_funcs adv7511_encoder_funcs = {
+	.dpms = adv7511_encoder_dpms,
+	.mode_valid = adv7511_encoder_mode_valid,
+	.mode_set = adv7511_encoder_mode_set,
+	.detect = adv7511_encoder_detect,
+	.get_modes = adv7511_get_modes,
+};
+
+/* -----------------------------------------------------------------------------
+ * Probe & remove
+ */
+
+static int adv7511_parse_dt(struct device_node *np,
+			    struct adv7511_link_config *config)
+{
+	const char *str;
+	int ret;
+
+	memset(config, 0, sizeof(*config));
+
+	of_property_read_u32(np, "adi,input-depth", &config->input_color_depth);
+	if (config->input_color_depth != 8 && config->input_color_depth != 10 &&
+	    config->input_color_depth != 12)
+		return -EINVAL;
+
+	ret = of_property_read_string(np, "adi,input-colorspace", &str);
+	if (ret < 0)
+		return ret;
+
+	if (!strcmp(str, "rgb"))
+		config->input_colorspace = HDMI_COLORSPACE_RGB;
+	else if (!strcmp(str, "yuv422"))
+		config->input_colorspace = HDMI_COLORSPACE_YUV422;
+	else if (!strcmp(str, "yuv444"))
+		config->input_colorspace = HDMI_COLORSPACE_YUV444;
+	else
+		return -EINVAL;
+
+	ret = of_property_read_string(np, "adi,input-clock", &str);
+	if (ret < 0)
+		return ret;
+
+	if (!strcmp(str, "1x"))
+		config->input_clock = ADV7511_INPUT_CLOCK_1X;
+	else if (!strcmp(str, "2x"))
+		config->input_clock = ADV7511_INPUT_CLOCK_2X;
+	else if (!strcmp(str, "ddr"))
+		config->input_clock = ADV7511_INPUT_CLOCK_DDR;
+	else
+		return -EINVAL;
+
+	if (config->input_colorspace == HDMI_COLORSPACE_YUV422 ||
+	    config->input_clock != ADV7511_INPUT_CLOCK_1X) {
+		ret = of_property_read_u32(np, "adi,input-style",
+					   &config->input_style);
+		if (ret)
+			return ret;
+
+		if (config->input_style < 1 || config->input_style > 3)
+			return -EINVAL;
+
+		ret = of_property_read_string(np, "adi,input-justification",
+					      &str);
+		if (ret < 0)
+			return ret;
+
+		if (!strcmp(str, "left"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_LEFT;
+		else if (!strcmp(str, "evenly"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_EVENLY;
+		else if (!strcmp(str, "right"))
+			config->input_justification =
+				ADV7511_INPUT_JUSTIFICATION_RIGHT;
+		else
+			return -EINVAL;
+
+	} else {
+		config->input_style = 1;
+		config->input_justification = ADV7511_INPUT_JUSTIFICATION_LEFT;
+	}
+
+	of_property_read_u32(np, "adi,clock-delay", &config->clock_delay);
+	if (config->clock_delay < -1200 || config->clock_delay > 1600)
+		return -EINVAL;
+
+	config->embedded_sync = of_property_read_bool(np, "adi,embedded-sync");
+
+	/* Hardcode the sync pulse configurations for now. */
+	config->sync_pulse = ADV7511_INPUT_SYNC_PULSE_NONE;
+	config->vsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+	config->hsync_polarity = ADV7511_SYNC_POLARITY_PASSTHROUGH;
+
+	return 0;
+}
+
+static const int edid_i2c_addr = 0x7e;
+static const int packet_i2c_addr = 0x70;
+static const int cec_i2c_addr = 0x78;
+
+static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
+{
+	struct adv7511_link_config link_config;
+	struct adv7511 *adv7511;
+	struct device *dev = &i2c->dev;
+	unsigned int val;
+	int ret;
+
+	if (!dev->of_node)
+		return -EINVAL;
+
+	adv7511 = devm_kzalloc(dev, sizeof(*adv7511), GFP_KERNEL);
+	if (!adv7511)
+		return -ENOMEM;
+
+	adv7511->dpms_mode = DRM_MODE_DPMS_OFF;
+	adv7511->status = connector_status_disconnected;
+
+	ret = adv7511_parse_dt(dev->of_node, &link_config);
+	if (ret)
+		return ret;
+
+	/*
+	 * The power down GPIO is optional. If present, toggle it from active to
+	 * inactive to wake up the encoder.
+	 */
+	adv7511->gpio_pd = devm_gpiod_get_optional(dev, "pd", GPIOD_OUT_HIGH);
+	if (IS_ERR(adv7511->gpio_pd))
+		return PTR_ERR(adv7511->gpio_pd);
+
+	if (adv7511->gpio_pd) {
+		mdelay(5);
+		gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
+	}
+
+	adv7511->regmap = devm_regmap_init_i2c(i2c, &adv7511_regmap_config);
+	if (IS_ERR(adv7511->regmap))
+		return PTR_ERR(adv7511->regmap);
+
+	ret = regmap_read(adv7511->regmap, ADV7511_REG_CHIP_REVISION, &val);
+	if (ret)
+		return ret;
+	dev_dbg(dev, "Rev. %d\n", val);
+
+	ret = regmap_register_patch(adv7511->regmap, adv7511_fixed_registers,
+				    ARRAY_SIZE(adv7511_fixed_registers));
+	if (ret)
+		return ret;
+
+	regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
+	regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
+		     packet_i2c_addr);
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
+	adv7511_packet_disable(adv7511, 0xffff);
+
+	adv7511->i2c_main = i2c;
+	adv7511->i2c_edid = i2c_new_dummy(i2c->adapter, edid_i2c_addr >> 1);
+	if (!adv7511->i2c_edid)
+		return -ENOMEM;
+
+	if (i2c->irq) {
+		init_waitqueue_head(&adv7511->wq);
+
+		ret = devm_request_threaded_irq(dev, i2c->irq, NULL,
+						adv7511_irq_handler,
+						IRQF_ONESHOT, dev_name(dev),
+						adv7511);
+		if (ret)
+			goto err_i2c_unregister_device;
+	}
+
+	/* CEC is unused for now */
+	regmap_write(adv7511->regmap, ADV7511_REG_CEC_CTRL,
+		     ADV7511_CEC_CTRL_POWER_DOWN);
+
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_POWER,
+			   ADV7511_POWER_POWER_DOWN, ADV7511_POWER_POWER_DOWN);
+
+	adv7511->current_edid_segment = -1;
+
+	i2c_set_clientdata(i2c, adv7511);
+
+	adv7511_set_link_config(adv7511, &link_config);
+
+	return 0;
+
+err_i2c_unregister_device:
+	i2c_unregister_device(adv7511->i2c_edid);
+
+	return ret;
+}
+
+static int adv7511_remove(struct i2c_client *i2c)
+{
+	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+	i2c_unregister_device(adv7511->i2c_edid);
+
+	kfree(adv7511->edid);
+
+	return 0;
+}
+
+static int adv7511_encoder_init(struct i2c_client *i2c, struct drm_device *dev,
+				struct drm_encoder_slave *encoder)
+{
+
+	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
+
+	encoder->slave_priv = adv7511;
+	encoder->slave_funcs = &adv7511_encoder_funcs;
+
+	adv7511->encoder = &encoder->base;
+
+	return 0;
+}
+
+static const struct i2c_device_id adv7511_i2c_ids[] = {
+	{ "adv7511", 0 },
+	{ "adv7511w", 0 },
+	{ "adv7513", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, adv7511_i2c_ids);
+
+static const struct of_device_id adv7511_of_ids[] = {
+	{ .compatible = "adi,adv7511", },
+	{ .compatible = "adi,adv7511w", },
+	{ .compatible = "adi,adv7513", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adv7511_of_ids);
+
+static struct drm_i2c_encoder_driver adv7511_driver = {
+	.i2c_driver = {
+		.driver = {
+			.name = "adv7511",
+			.of_match_table = adv7511_of_ids,
+		},
+		.id_table = adv7511_i2c_ids,
+		.probe = adv7511_probe,
+		.remove = adv7511_remove,
+	},
+
+	.encoder_init = adv7511_encoder_init,
+};
+
+static int __init adv7511_init(void)
+{
+	return drm_i2c_encoder_register(THIS_MODULE, &adv7511_driver);
+}
+module_init(adv7511_init);
+
+static void __exit adv7511_exit(void)
+{
+	drm_i2c_encoder_unregister(&adv7511_driver);
+}
+module_exit(adv7511_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("ADV7511 HDMI transmitter driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/i2c/adv7511.h b/drivers/gpu/drm/i2c/adv7511.h
new file mode 100644
index 0000000..6599ed5
--- /dev/null
+++ b/drivers/gpu/drm/i2c/adv7511.h
@@ -0,0 +1,289 @@
+/*
+ * Analog Devices ADV7511 HDMI transmitter driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef __DRM_I2C_ADV7511_H__
+#define __DRM_I2C_ADV7511_H__
+
+#include <linux/hdmi.h>
+
+#define ADV7511_REG_CHIP_REVISION		0x00
+#define ADV7511_REG_N0				0x01
+#define ADV7511_REG_N1				0x02
+#define ADV7511_REG_N2				0x03
+#define ADV7511_REG_SPDIF_FREQ			0x04
+#define ADV7511_REG_CTS_AUTOMATIC1		0x05
+#define ADV7511_REG_CTS_AUTOMATIC2		0x06
+#define ADV7511_REG_CTS_MANUAL0			0x07
+#define ADV7511_REG_CTS_MANUAL1			0x08
+#define ADV7511_REG_CTS_MANUAL2			0x09
+#define ADV7511_REG_AUDIO_SOURCE		0x0a
+#define ADV7511_REG_AUDIO_CONFIG		0x0b
+#define ADV7511_REG_I2S_CONFIG			0x0c
+#define ADV7511_REG_I2S_WIDTH			0x0d
+#define ADV7511_REG_AUDIO_SUB_SRC0		0x0e
+#define ADV7511_REG_AUDIO_SUB_SRC1		0x0f
+#define ADV7511_REG_AUDIO_SUB_SRC2		0x10
+#define ADV7511_REG_AUDIO_SUB_SRC3		0x11
+#define ADV7511_REG_AUDIO_CFG1			0x12
+#define ADV7511_REG_AUDIO_CFG2			0x13
+#define ADV7511_REG_AUDIO_CFG3			0x14
+#define ADV7511_REG_I2C_FREQ_ID_CFG		0x15
+#define ADV7511_REG_VIDEO_INPUT_CFG1		0x16
+#define ADV7511_REG_CSC_UPPER(x)		(0x18 + (x) * 2)
+#define ADV7511_REG_CSC_LOWER(x)		(0x19 + (x) * 2)
+#define ADV7511_REG_SYNC_DECODER(x)		(0x30 + (x))
+#define ADV7511_REG_DE_GENERATOR		(0x35 + (x))
+#define ADV7511_REG_PIXEL_REPETITION		0x3b
+#define ADV7511_REG_VIC_MANUAL			0x3c
+#define ADV7511_REG_VIC_SEND			0x3d
+#define ADV7511_REG_VIC_DETECTED		0x3e
+#define ADV7511_REG_AUX_VIC_DETECTED		0x3f
+#define ADV7511_REG_PACKET_ENABLE0		0x40
+#define ADV7511_REG_POWER			0x41
+#define ADV7511_REG_STATUS			0x42
+#define ADV7511_REG_EDID_I2C_ADDR		0x43
+#define ADV7511_REG_PACKET_ENABLE1		0x44
+#define ADV7511_REG_PACKET_I2C_ADDR		0x45
+#define ADV7511_REG_DSD_ENABLE			0x46
+#define ADV7511_REG_VIDEO_INPUT_CFG2		0x48
+#define ADV7511_REG_INFOFRAME_UPDATE		0x4a
+#define ADV7511_REG_GC(x)			(0x4b + (x)) /* 0x4b - 0x51 */
+#define ADV7511_REG_AVI_INFOFRAME_VERSION	0x52
+#define ADV7511_REG_AVI_INFOFRAME_LENGTH	0x53
+#define ADV7511_REG_AVI_INFOFRAME_CHECKSUM	0x54
+#define ADV7511_REG_AVI_INFOFRAME(x)		(0x55 + (x)) /* 0x55 - 0x6f */
+#define ADV7511_REG_AUDIO_INFOFRAME_VERSION	0x70
+#define ADV7511_REG_AUDIO_INFOFRAME_LENGTH	0x71
+#define ADV7511_REG_AUDIO_INFOFRAME_CHECKSUM	0x72
+#define ADV7511_REG_AUDIO_INFOFRAME(x)		(0x73 + (x)) /* 0x73 - 0x7c */
+#define ADV7511_REG_INT_ENABLE(x)		(0x94 + (x))
+#define ADV7511_REG_INT(x)			(0x96 + (x))
+#define ADV7511_REG_INPUT_CLK_DIV		0x9d
+#define ADV7511_REG_PLL_STATUS			0x9e
+#define ADV7511_REG_HDMI_POWER			0xa1
+#define ADV7511_REG_HDCP_HDMI_CFG		0xaf
+#define ADV7511_REG_AN(x)			(0xb0 + (x)) /* 0xb0 - 0xb7 */
+#define ADV7511_REG_HDCP_STATUS			0xb8
+#define ADV7511_REG_BCAPS			0xbe
+#define ADV7511_REG_BKSV(x)			(0xc0 + (x)) /* 0xc0 - 0xc3 */
+#define ADV7511_REG_EDID_SEGMENT		0xc4
+#define ADV7511_REG_DDC_STATUS			0xc8
+#define ADV7511_REG_EDID_READ_CTRL		0xc9
+#define ADV7511_REG_BSTATUS(x)			(0xca + (x)) /* 0xca - 0xcb */
+#define ADV7511_REG_TIMING_GEN_SEQ		0xd0
+#define ADV7511_REG_POWER2			0xd6
+#define ADV7511_REG_HSYNC_PLACEMENT_MSB		0xfa
+
+#define ADV7511_REG_SYNC_ADJUSTMENT(x)		(0xd7 + (x)) /* 0xd7 - 0xdc */
+#define ADV7511_REG_TMDS_CLOCK_INV		0xde
+#define ADV7511_REG_ARC_CTRL			0xdf
+#define ADV7511_REG_CEC_I2C_ADDR		0xe1
+#define ADV7511_REG_CEC_CTRL			0xe2
+#define ADV7511_REG_CHIP_ID_HIGH		0xf5
+#define ADV7511_REG_CHIP_ID_LOW			0xf6
+
+#define ADV7511_CSC_ENABLE			BIT(7)
+#define ADV7511_CSC_UPDATE_MODE			BIT(5)
+
+#define ADV7511_INT0_HDP			BIT(7)
+#define ADV7511_INT0_VSYNC			BIT(5)
+#define ADV7511_INT0_AUDIO_FIFO_FULL		BIT(4)
+#define ADV7511_INT0_EDID_READY			BIT(2)
+#define ADV7511_INT0_HDCP_AUTHENTICATED		BIT(1)
+
+#define ADV7511_INT1_DDC_ERROR			BIT(7)
+#define ADV7511_INT1_BKSV			BIT(6)
+#define ADV7511_INT1_CEC_TX_READY		BIT(5)
+#define ADV7511_INT1_CEC_TX_ARBIT_LOST		BIT(4)
+#define ADV7511_INT1_CEC_TX_RETRY_TIMEOUT	BIT(3)
+#define ADV7511_INT1_CEC_RX_READY3		BIT(2)
+#define ADV7511_INT1_CEC_RX_READY2		BIT(1)
+#define ADV7511_INT1_CEC_RX_READY1		BIT(0)
+
+#define ADV7511_ARC_CTRL_POWER_DOWN		BIT(0)
+
+#define ADV7511_CEC_CTRL_POWER_DOWN		BIT(0)
+
+#define ADV7511_POWER_POWER_DOWN		BIT(6)
+
+#define ADV7511_HDMI_CFG_MODE_MASK		0x2
+#define ADV7511_HDMI_CFG_MODE_DVI		0x0
+#define ADV7511_HDMI_CFG_MODE_HDMI		0x2
+
+#define ADV7511_AUDIO_SELECT_I2C		0x0
+#define ADV7511_AUDIO_SELECT_SPDIF		0x1
+#define ADV7511_AUDIO_SELECT_DSD		0x2
+#define ADV7511_AUDIO_SELECT_HBR		0x3
+#define ADV7511_AUDIO_SELECT_DST		0x4
+
+#define ADV7511_I2S_SAMPLE_LEN_16		0x2
+#define ADV7511_I2S_SAMPLE_LEN_20		0x3
+#define ADV7511_I2S_SAMPLE_LEN_18		0x4
+#define ADV7511_I2S_SAMPLE_LEN_22		0x5
+#define ADV7511_I2S_SAMPLE_LEN_19		0x8
+#define ADV7511_I2S_SAMPLE_LEN_23		0x9
+#define ADV7511_I2S_SAMPLE_LEN_24		0xb
+#define ADV7511_I2S_SAMPLE_LEN_17		0xc
+#define ADV7511_I2S_SAMPLE_LEN_21		0xd
+
+#define ADV7511_SAMPLE_FREQ_44100		0x0
+#define ADV7511_SAMPLE_FREQ_48000		0x2
+#define ADV7511_SAMPLE_FREQ_32000		0x3
+#define ADV7511_SAMPLE_FREQ_88200		0x8
+#define ADV7511_SAMPLE_FREQ_96000		0xa
+#define ADV7511_SAMPLE_FREQ_176400		0xc
+#define ADV7511_SAMPLE_FREQ_192000		0xe
+
+#define ADV7511_STATUS_POWER_DOWN_POLARITY	BIT(7)
+#define ADV7511_STATUS_HPD			BIT(6)
+#define ADV7511_STATUS_MONITOR_SENSE		BIT(5)
+#define ADV7511_STATUS_I2S_32BIT_MODE		BIT(3)
+
+#define ADV7511_PACKET_ENABLE_N_CTS		BIT(8+6)
+#define ADV7511_PACKET_ENABLE_AUDIO_SAMPLE	BIT(8+5)
+#define ADV7511_PACKET_ENABLE_AVI_INFOFRAME	BIT(8+4)
+#define ADV7511_PACKET_ENABLE_AUDIO_INFOFRAME	BIT(8+3)
+#define ADV7511_PACKET_ENABLE_GC		BIT(7)
+#define ADV7511_PACKET_ENABLE_SPD		BIT(6)
+#define ADV7511_PACKET_ENABLE_MPEG		BIT(5)
+#define ADV7511_PACKET_ENABLE_ACP		BIT(4)
+#define ADV7511_PACKET_ENABLE_ISRC		BIT(3)
+#define ADV7511_PACKET_ENABLE_GM		BIT(2)
+#define ADV7511_PACKET_ENABLE_SPARE2		BIT(1)
+#define ADV7511_PACKET_ENABLE_SPARE1		BIT(0)
+
+#define ADV7511_REG_POWER2_HDP_SRC_MASK		0xc0
+#define ADV7511_REG_POWER2_HDP_SRC_BOTH		0x00
+#define ADV7511_REG_POWER2_HDP_SRC_HDP		0x40
+#define ADV7511_REG_POWER2_HDP_SRC_CEC		0x80
+#define ADV7511_REG_POWER2_HDP_SRC_NONE		0xc0
+#define ADV7511_REG_POWER2_TDMS_ENABLE		BIT(4)
+#define ADV7511_REG_POWER2_GATE_INPUT_CLK	BIT(0)
+
+#define ADV7511_LOW_REFRESH_RATE_NONE		0x0
+#define ADV7511_LOW_REFRESH_RATE_24HZ		0x1
+#define ADV7511_LOW_REFRESH_RATE_25HZ		0x2
+#define ADV7511_LOW_REFRESH_RATE_30HZ		0x3
+
+#define ADV7511_AUDIO_CFG3_LEN_MASK		0x0f
+#define ADV7511_I2C_FREQ_ID_CFG_RATE_MASK	0xf0
+
+#define ADV7511_AUDIO_SOURCE_I2S		0
+#define ADV7511_AUDIO_SOURCE_SPDIF		1
+
+#define ADV7511_I2S_FORMAT_I2S			0
+#define ADV7511_I2S_FORMAT_RIGHT_J		1
+#define ADV7511_I2S_FORMAT_LEFT_J		2
+
+#define ADV7511_PACKET(p, x)	    ((p) * 0x20 + (x))
+#define ADV7511_PACKET_SDP(x)	    ADV7511_PACKET(0, x)
+#define ADV7511_PACKET_MPEG(x)	    ADV7511_PACKET(1, x)
+#define ADV7511_PACKET_ACP(x)	    ADV7511_PACKET(2, x)
+#define ADV7511_PACKET_ISRC1(x)	    ADV7511_PACKET(3, x)
+#define ADV7511_PACKET_ISRC2(x)	    ADV7511_PACKET(4, x)
+#define ADV7511_PACKET_GM(x)	    ADV7511_PACKET(5, x)
+#define ADV7511_PACKET_SPARE(x)	    ADV7511_PACKET(6, x)
+
+enum adv7511_input_clock {
+	ADV7511_INPUT_CLOCK_1X,
+	ADV7511_INPUT_CLOCK_2X,
+	ADV7511_INPUT_CLOCK_DDR,
+};
+
+enum adv7511_input_justification {
+	ADV7511_INPUT_JUSTIFICATION_EVENLY = 0,
+	ADV7511_INPUT_JUSTIFICATION_RIGHT = 1,
+	ADV7511_INPUT_JUSTIFICATION_LEFT = 2,
+};
+
+enum adv7511_input_sync_pulse {
+	ADV7511_INPUT_SYNC_PULSE_DE = 0,
+	ADV7511_INPUT_SYNC_PULSE_HSYNC = 1,
+	ADV7511_INPUT_SYNC_PULSE_VSYNC = 2,
+	ADV7511_INPUT_SYNC_PULSE_NONE = 3,
+};
+
+/**
+ * enum adv7511_sync_polarity - Polarity for the input sync signals
+ * @ADV7511_SYNC_POLARITY_PASSTHROUGH:  Sync polarity matches that of
+ *				       the currently configured mode.
+ * @ADV7511_SYNC_POLARITY_LOW:	    Sync polarity is low
+ * @ADV7511_SYNC_POLARITY_HIGH:	    Sync polarity is high
+ *
+ * If the polarity is set to either LOW or HIGH the driver will configure the
+ * ADV7511 to internally invert the sync signal if required to match the sync
+ * polarity setting for the currently selected output mode.
+ *
+ * If the polarity is set to PASSTHROUGH, the ADV7511 will route the signal
+ * unchanged. This is used when the upstream graphics core already generates
+ * the sync signals with the correct polarity.
+ */
+enum adv7511_sync_polarity {
+	ADV7511_SYNC_POLARITY_PASSTHROUGH,
+	ADV7511_SYNC_POLARITY_LOW,
+	ADV7511_SYNC_POLARITY_HIGH,
+};
+
+/**
+ * struct adv7511_link_config - Describes adv7511 hardware configuration
+ * @input_color_depth:		Number of bits per color component (8, 10 or 12)
+ * @input_colorspace:		The input colorspace (RGB, YUV444, YUV422)
+ * @input_clock:		The input video clock style (1x, 2x, DDR)
+ * @input_style:		The input component arrangement variant
+ * @input_justification:	Video input format bit justification
+ * @clock_delay:		Clock delay for the input clock (in ps)
+ * @embedded_sync:		Video input uses BT.656-style embedded sync
+ * @sync_pulse:			Select the sync pulse
+ * @vsync_polarity:		vsync input signal configuration
+ * @hsync_polarity:		hsync input signal configuration
+ */
+struct adv7511_link_config {
+	unsigned int input_color_depth;
+	enum hdmi_colorspace input_colorspace;
+	enum adv7511_input_clock input_clock;
+	unsigned int input_style;
+	enum adv7511_input_justification input_justification;
+
+	int clock_delay;
+
+	bool embedded_sync;
+	enum adv7511_input_sync_pulse sync_pulse;
+	enum adv7511_sync_polarity vsync_polarity;
+	enum adv7511_sync_polarity hsync_polarity;
+};
+
+/**
+ * enum adv7511_csc_scaling - Scaling factor for the ADV7511 CSC
+ * @ADV7511_CSC_SCALING_1: CSC results are not scaled
+ * @ADV7511_CSC_SCALING_2: CSC results are scaled by a factor of two
+ * @ADV7511_CSC_SCALING_4: CSC results are scalled by a factor of four
+ */
+enum adv7511_csc_scaling {
+	ADV7511_CSC_SCALING_1 = 0,
+	ADV7511_CSC_SCALING_2 = 1,
+	ADV7511_CSC_SCALING_4 = 2,
+};
+
+/**
+ * struct adv7511_video_config - Describes adv7511 hardware configuration
+ * @csc_enable:			Whether to enable color space conversion
+ * @csc_scaling_factor:		Color space conversion scaling factor
+ * @csc_coefficents:		Color space conversion coefficents
+ * @hdmi_mode:			Whether to use HDMI or DVI output mode
+ * @avi_infoframe:		HDMI infoframe
+ */
+struct adv7511_video_config {
+	bool csc_enable;
+	enum adv7511_csc_scaling csc_scaling_factor;
+	const uint16_t *csc_coefficents;
+
+	bool hdmi_mode;
+	struct hdmi_avi_infoframe avi_infoframe;
+};
+
+#endif /* __DRM_I2C_ADV7511_H__ */
-- 
1.8.5.5

  parent reply	other threads:[~2014-09-24 20:04 UTC|newest]

Thread overview: 49+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-24 20:04 [PATCH 00/12] Renesas R-Car DU HDMI support Laurent Pinchart
2014-09-24 20:04 ` Laurent Pinchart
2014-09-24 20:04 ` [PATCH 01/12] of: Decrement refcount of previous endpoint in of_graph_get_next_endpoint Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-09-24 20:04 ` [PATCH 02/12] of: Add for_each_endpoint_of_node helper macro Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-09-24 20:04 ` [PATCH 03/12] drm: rcar-du: Remove platform data support Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-09-24 20:04 ` [PATCH 04/12] drm: rcar-du: Use for_each_endpoint_of_node() Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-09-24 20:04 ` [PATCH 05/12] drm: rcar-du: Pass the encoder DT node to rcar_du_encoder_init() Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-09-24 20:04 ` [PATCH 06/12] drm: rcar-du: Replace direct DRM encoder access with cast macro Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-09-24 20:04 ` [PATCH 07/12] drm: rcar-du: Replace drm_encoder with drm_slave_encoder Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-09-24 20:04 ` [PATCH 08/12] drm: rcar-du: Add HDMI encoder and connector support Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-09-24 20:04 ` [PATCH 09/12] drm: Decouple EDID parsing from I2C adapter Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-09-24 20:04 ` [PATCH 10/12] video: Add ADV751[13] DT bindings documentation Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-09-25  7:06   ` Geert Uytterhoeven
2014-09-25  7:06     ` Geert Uytterhoeven
2014-09-25  9:57     ` Laurent Pinchart
2014-09-25  9:57       ` Laurent Pinchart
2014-09-25 10:10       ` Geert Uytterhoeven
2014-09-25 10:10         ` Geert Uytterhoeven
2014-09-26 12:30         ` Laurent Pinchart
2014-09-26 12:30           ` Laurent Pinchart
2014-09-24 20:04 ` Laurent Pinchart [this message]
2014-09-24 20:04   ` [PATCH 11/12] drm: Add adv7511 encoder driver Laurent Pinchart
2014-09-24 20:04 ` [PATCH 12/12] ARM: shmobile: koelsch: Add DU HDMI output support Laurent Pinchart
2014-09-24 20:04   ` Laurent Pinchart
2014-10-27  0:38   ` Simon Horman
2014-10-27  0:38     ` Simon Horman
2014-10-27 12:12     ` Laurent Pinchart
2014-10-27 12:12       ` Laurent Pinchart
2014-10-27 12:30       ` Simon Horman
2015-02-06  0:58       ` Simon Horman
2015-02-06  0:58         ` Simon Horman
2015-02-08 16:08         ` Laurent Pinchart
2015-02-08 16:08           ` Laurent Pinchart
2015-02-09  5:27           ` Simon Horman
2015-02-09  5:27             ` Simon Horman
2014-09-25 13:09 ` [PATCH 00/12] Renesas R-Car DU HDMI support Philipp Zabel
2014-09-25 13:09   ` Philipp Zabel
2014-09-26 11:35   ` Laurent Pinchart
2014-09-26 11:35     ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1411589072-28609-12-git-send-email-laurent.pinchart+renesas@ideasonboard.com \
    --to=laurent.pinchart+renesas@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.