From: Mikko Perttunen <cyndis@kapsi.fi> To: edubezval@gmail.com, swarren@wwwdotorg.org, thierry.reding@gmail.com Cc: linux-pm@vger.kernel.org, linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, juha-matti.tilli@iki.fi, Mikko Perttunen <mperttunen@nvidia.com> Subject: [PATCH v6 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree Date: Fri, 26 Sep 2014 12:43:11 +0300 [thread overview] Message-ID: <1411724593-4037-3-git-send-email-cyndis@kapsi.fi> (raw) In-Reply-To: <1411724593-4037-1-git-send-email-cyndis@kapsi.fi> From: Mikko Perttunen <mperttunen@nvidia.com> This adds the soctherm thermal sensing and management unit to the Tegra124 device tree along with the four thermal zones corresponding to the four thermal sensors provided by soctherm. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- arch/arm/boot/dts/tegra124.dtsi | 47 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 3cb1548..a7608a4 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/tegra124-soctherm.h> #include "skeleton.dtsi" @@ -610,6 +611,18 @@ status = "disabled"; }; + soctherm: thermal-sensor@0,700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x0 0x700e2000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + #thermal-sensor-cells = <1>; + }; + ahub@0,70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, @@ -851,6 +864,40 @@ }; }; + thermal-zones { + cpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + }; + + mem { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>; + }; + + gpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>; + }; + + pllx { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 -- 2.1.0
WARNING: multiple messages have this Message-ID (diff)
From: cyndis@kapsi.fi (Mikko Perttunen) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree Date: Fri, 26 Sep 2014 12:43:11 +0300 [thread overview] Message-ID: <1411724593-4037-3-git-send-email-cyndis@kapsi.fi> (raw) In-Reply-To: <1411724593-4037-1-git-send-email-cyndis@kapsi.fi> From: Mikko Perttunen <mperttunen@nvidia.com> This adds the soctherm thermal sensing and management unit to the Tegra124 device tree along with the four thermal zones corresponding to the four thermal sensors provided by soctherm. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> --- arch/arm/boot/dts/tegra124.dtsi | 47 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 3cb1548..a7608a4 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -3,6 +3,7 @@ #include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/pinctrl/pinctrl-tegra-xusb.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/tegra124-soctherm.h> #include "skeleton.dtsi" @@ -610,6 +611,18 @@ status = "disabled"; }; + soctherm: thermal-sensor at 0,700e2000 { + compatible = "nvidia,tegra124-soctherm"; + reg = <0x0 0x700e2000 0x0 0x1000>; + interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TSENSOR>, + <&tegra_car TEGRA124_CLK_SOC_THERM>; + clock-names = "tsensor", "soctherm"; + resets = <&tegra_car 78>; + reset-names = "soctherm"; + #thermal-sensor-cells = <1>; + }; + ahub at 0,70300000 { compatible = "nvidia,tegra124-ahub"; reg = <0x0 0x70300000 0x0 0x200>, @@ -851,6 +864,40 @@ }; }; + thermal-zones { + cpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_CPU>; + }; + + mem { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_MEM>; + }; + + gpu { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_GPU>; + }; + + pllx { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = + <&soctherm TEGRA124_SOCTHERM_SENSOR_PLLX>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 -- 2.1.0
next prev parent reply other threads:[~2014-09-26 9:43 UTC|newest] Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-09-26 9:43 [PATCH v6 0/4] Tegra124 soctherm driver Mikko Perttunen 2014-09-26 9:43 ` Mikko Perttunen [not found] ` <1411724593-4037-1-git-send-email-cyndis-/1wQRMveznE@public.gmane.org> 2014-09-26 9:43 ` [PATCH v6 1/4] of: Add bindings for nvidia,tegra124-soctherm Mikko Perttunen 2014-09-26 9:43 ` Mikko Perttunen 2014-09-26 9:43 ` Mikko Perttunen 2014-09-26 9:43 ` Mikko Perttunen [this message] 2014-09-26 9:43 ` [PATCH v6 2/4] ARM: tegra: Add soctherm and thermal zones to Tegra124 device tree Mikko Perttunen [not found] ` <1411724593-4037-3-git-send-email-cyndis-/1wQRMveznE@public.gmane.org> 2014-11-05 5:34 ` boot regression with AHCI on jetson-tk1 Allen Martin [not found] ` <20141105053414.GA24124-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org> 2014-11-05 17:42 ` Mikko Perttunen [not found] ` <545A6171.6000802-/1wQRMveznE@public.gmane.org> 2014-11-05 19:46 ` Allen Martin [not found] ` <3cfbab737b604d139e0aabcc33be0a43-wO81nVYWzR7YuxH7O460wFaTQe2KTcn/@public.gmane.org> 2014-11-05 20:08 ` Mikko Perttunen 2014-11-05 20:10 ` Stephen Warren [not found] ` <545A8452.2050404-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org> 2014-11-05 21:08 ` Allen Martin [not found] ` <f1451de182a0439f96abf8ed9dacd272-wO81nVYWzR7YuxH7O460wFaTQe2KTcn/@public.gmane.org> 2014-11-06 11:27 ` [PATCH] Move reset assertions Mikko Perttunen 2014-09-26 9:43 ` [PATCH v6 3/4] ARM: tegra: Add thermal trip points for Jetson TK1 Mikko Perttunen 2014-09-26 9:43 ` Mikko Perttunen 2014-09-26 9:43 ` [PATCH v6 4/4] thermal: Add Tegra SOCTHERM thermal management driver Mikko Perttunen 2014-09-26 9:43 ` Mikko Perttunen 2014-09-26 11:45 ` Thierry Reding 2014-09-26 11:45 ` Thierry Reding 2014-09-26 20:28 ` Mikko Perttunen 2014-09-26 20:28 ` Mikko Perttunen 2014-09-26 20:28 ` Mikko Perttunen 2014-09-27 12:06 ` Juha-Matti Tilli 2014-09-27 12:06 ` Juha-Matti Tilli 2014-09-27 12:06 ` Juha-Matti Tilli [not found] ` <20140927120649.GA70809-Xv4IVSKz7SWQi9Q/X01l6/UpdFzICT1y@public.gmane.org> 2014-09-29 13:42 ` Mikko Perttunen 2014-09-29 13:42 ` Mikko Perttunen 2014-09-29 13:42 ` Mikko Perttunen 2014-09-29 8:14 ` Peter De Schrijver 2014-09-29 8:14 ` Peter De Schrijver 2014-09-29 8:14 ` Peter De Schrijver [not found] ` <5425CC6F.2020309-/1wQRMveznE@public.gmane.org> 2014-09-29 8:29 ` Thierry Reding 2014-09-29 8:29 ` Thierry Reding 2014-09-29 8:29 ` Thierry Reding 2014-09-29 13:37 ` Mikko Perttunen 2014-09-29 13:37 ` Mikko Perttunen 2014-09-29 14:17 ` [PATCH v7 " Mikko Perttunen 2014-09-29 14:17 ` Mikko Perttunen 2014-10-15 10:05 ` Mikko Perttunen 2014-10-15 10:05 ` Mikko Perttunen [not found] ` <543E46DF.8060705-/1wQRMveznE@public.gmane.org> 2014-11-07 15:54 ` Eduardo Valentin 2014-11-07 15:54 ` Eduardo Valentin 2014-11-07 15:54 ` Eduardo Valentin 2014-11-08 1:11 ` Mikko Perttunen 2014-11-08 1:11 ` Mikko Perttunen 2014-11-08 1:11 ` Mikko Perttunen 2014-09-26 10:19 ` [PATCH v6 0/4] Tegra124 soctherm driver Thierry Reding 2014-09-26 10:19 ` Thierry Reding 2014-09-26 10:22 ` Mikko Perttunen 2014-09-26 10:22 ` Mikko Perttunen [not found] ` <54253E7C.9080704-/1wQRMveznE@public.gmane.org> 2014-09-26 11:48 ` Thierry Reding 2014-09-26 11:48 ` Thierry Reding 2014-09-26 11:48 ` Thierry Reding 2014-09-26 12:00 ` Mikko Perttunen 2014-09-26 12:00 ` Mikko Perttunen [not found] ` <5425554B.7060102-/1wQRMveznE@public.gmane.org> 2014-09-26 12:05 ` Thierry Reding 2014-09-26 12:05 ` Thierry Reding 2014-09-26 12:05 ` Thierry Reding 2014-09-26 12:09 ` Mikko Perttunen 2014-09-26 12:09 ` Mikko Perttunen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1411724593-4037-3-git-send-email-cyndis@kapsi.fi \ --to=cyndis@kapsi.fi \ --cc=edubezval@gmail.com \ --cc=juha-matti.tilli@iki.fi \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-tegra@vger.kernel.org \ --cc=mperttunen@nvidia.com \ --cc=swarren@wwwdotorg.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.