From: Felipe Balbi <balbi@ti.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data
Date: Tue, 14 Oct 2014 18:28:55 +0000 [thread overview]
Message-ID: <1413311335-25083-3-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1413311335-25083-1-git-send-email-balbi@ti.com>
Caused by a copy & paste error. Note that even with
this bug AM437x SK display still works because GPIO
mux mode is always enabled. It's still wrong to mux
somebody else's pin.
Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x
isn't used for anything.
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
arch/arm/boot/dts/am437x-sk-evm.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 859ff3d..681be00 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -320,8 +320,7 @@
lcd_pins: lcd_pins {
pinctrl-single,pins = <
- /* GPIO 5_8 to select LCD / HDMI */
- 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ 0x1c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
>;
};
};
--
2.1.0.GIT
WARNING: multiple messages have this Message-ID (diff)
From: Felipe Balbi <balbi@ti.com>
To: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Linux OMAP Mailing List <linux-omap@vger.kernel.org>,
Tony Lindgren <tony@atomide.com>,
Benoit Cousson <bcousson@baylibre.com>,
Linux ARM Kernel Mailing List
<linux-arm-kernel@lists.infradead.org>,
linux-fbdev@vger.kernel.org, Darren Etheridge <detheridge@ti.com>,
Felipe Balbi <balbi@ti.com>
Subject: [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data
Date: Tue, 14 Oct 2014 13:28:55 -0500 [thread overview]
Message-ID: <1413311335-25083-3-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1413311335-25083-1-git-send-email-balbi@ti.com>
Caused by a copy & paste error. Note that even with
this bug AM437x SK display still works because GPIO
mux mode is always enabled. It's still wrong to mux
somebody else's pin.
Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x
isn't used for anything.
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
arch/arm/boot/dts/am437x-sk-evm.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 859ff3d..681be00 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -320,8 +320,7 @@
lcd_pins: lcd_pins {
pinctrl-single,pins = <
- /* GPIO 5_8 to select LCD / HDMI */
- 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ 0x1c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
>;
};
};
--
2.1.0.GIT
WARNING: multiple messages have this Message-ID (diff)
From: balbi@ti.com (Felipe Balbi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data
Date: Tue, 14 Oct 2014 13:28:55 -0500 [thread overview]
Message-ID: <1413311335-25083-3-git-send-email-balbi@ti.com> (raw)
In-Reply-To: <1413311335-25083-1-git-send-email-balbi@ti.com>
Caused by a copy & paste error. Note that even with
this bug AM437x SK display still works because GPIO
mux mode is always enabled. It's still wrong to mux
somebody else's pin.
Luckily ball D25 (offset 0x238 - gpio5_8) on AM437x
isn't used for anything.
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
arch/arm/boot/dts/am437x-sk-evm.dts | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts
index 859ff3d..681be00 100644
--- a/arch/arm/boot/dts/am437x-sk-evm.dts
+++ b/arch/arm/boot/dts/am437x-sk-evm.dts
@@ -320,8 +320,7 @@
lcd_pins: lcd_pins {
pinctrl-single,pins = <
- /* GPIO 5_8 to select LCD / HDMI */
- 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+ 0x1c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
>;
};
};
--
2.1.0.GIT
next prev parent reply other threads:[~2014-10-14 18:28 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-14 18:28 [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation Felipe Balbi
2014-10-14 18:28 ` Felipe Balbi
2014-10-14 18:28 ` Felipe Balbi
2014-10-14 18:28 ` [PATCH 2/3] video: fbdev: omap2: omapfb: add missing MODULE_ALIAS() Felipe Balbi
2014-10-14 18:28 ` Felipe Balbi
2014-10-14 18:28 ` Felipe Balbi
2014-10-14 18:34 ` Felipe Balbi
2014-10-14 18:34 ` Felipe Balbi
2014-10-14 18:34 ` Felipe Balbi
2014-10-15 12:46 ` Tomi Valkeinen
2014-10-15 12:46 ` Tomi Valkeinen
2014-10-15 12:46 ` Tomi Valkeinen
2014-10-15 14:37 ` Felipe Balbi
2014-10-15 14:37 ` Felipe Balbi
2014-10-15 14:37 ` Felipe Balbi
2014-10-15 12:20 ` Tomi Valkeinen
2014-10-15 12:20 ` Tomi Valkeinen
2014-10-15 12:20 ` Tomi Valkeinen
2014-10-15 14:38 ` Felipe Balbi
2014-10-15 14:38 ` Felipe Balbi
2014-10-15 14:38 ` Felipe Balbi
2014-10-15 15:45 ` Tomi Valkeinen
2014-10-15 15:45 ` Tomi Valkeinen
2014-10-15 15:45 ` Tomi Valkeinen
2014-10-14 18:28 ` Felipe Balbi [this message]
2014-10-14 18:28 ` [PATCH 3/3] arm: boot: dts: am437x-sk: fix lcd enable pin mux data Felipe Balbi
2014-10-14 18:28 ` Felipe Balbi
2014-10-15 12:24 ` Tomi Valkeinen
2014-10-15 12:24 ` Tomi Valkeinen
2014-10-15 12:24 ` Tomi Valkeinen
2014-12-04 14:43 ` Felipe Balbi
2014-12-04 14:43 ` Felipe Balbi
2014-12-04 14:43 ` Felipe Balbi
2014-12-04 15:05 ` Felipe Balbi
2014-12-04 15:05 ` Felipe Balbi
2014-12-04 15:05 ` Felipe Balbi
2014-12-04 15:10 ` [PATCH] " Felipe Balbi
2014-12-04 15:10 ` Felipe Balbi
2014-12-10 16:31 ` Tony Lindgren
2014-12-10 16:31 ` Tony Lindgren
2014-10-15 12:13 ` [PATCH 1/3] video: fbdev: omap2: omapfb: remove __exit annotation Tomi Valkeinen
2014-10-15 12:13 ` Tomi Valkeinen
2014-10-15 12:13 ` Tomi Valkeinen
2014-10-15 14:41 ` Felipe Balbi
2014-10-15 14:41 ` Felipe Balbi
2014-10-15 14:41 ` Felipe Balbi
2014-10-15 15:43 ` Tomi Valkeinen
2014-10-15 15:43 ` Tomi Valkeinen
2014-10-15 15:43 ` Tomi Valkeinen
2014-10-15 15:54 ` Felipe Balbi
2014-10-15 15:54 ` Felipe Balbi
2014-10-15 15:54 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413311335-25083-3-git-send-email-balbi@ti.com \
--to=balbi@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.