From: Kever Yang <kever.yang@rock-chips.com> To: heiko@sntech.de Cc: dianders@chromium.org, cf@rock-chips.com, dkl@rock-chips.com, huangtao@rock-chips.com, linux-rockchip@lists.infradead.org, Kever Yang <kever.yang@rock-chips.com>, Mike Turquette <mturquette@linaro.org>, Derek Basehore <dbasehore@chromium.org>, Guenter Roeck <linux@roeck-us.net>, Jianqun <jay.xu@rock-chips.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH] clk: rockchip: add npll to source of sclk_gpu Date: Thu, 16 Oct 2014 15:46:36 -0700 [thread overview] Message-ID: <1413499597-23908-1-git-send-email-kever.yang@rock-chips.com> (raw) This patch make a common source for uart0 pll src and sclk_gpu, so that gpu can get its cloc from npll. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> --- drivers/clk/rockchip/clk-rk3288.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index 504b6c2a..3f839cf 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -174,14 +174,14 @@ PNAME(mux_aclk_cpu_src_p) = { "cpll_aclk_cpu", "gpll_aclk_cpu" }; PNAME(mux_pll_src_cpll_gpll_p) = { "cpll", "gpll" }; PNAME(mux_pll_src_npll_cpll_gpll_p) = { "npll", "cpll", "gpll" }; PNAME(mux_pll_src_cpll_gpll_npll_p) = { "cpll", "gpll", "npll" }; -PNAME(mux_pll_src_cpll_gpll_usb480m_p) = { "cpll", "gpll", "usb480m" }; +PNAME(mux_pll_src_cpll_gpll_usb480m_p) = { "cpll", "gpll", "usbphy480m_src" }; +PNAME(mux_pll_src_cpll_gll_usb_npll_p) = { "cpll", "gpll", "usbphy480m_src", "npll" }; PNAME(mux_mmc_src_p) = { "cpll", "gpll", "xin24m", "xin24m" }; PNAME(mux_i2s_pre_p) = { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" }; PNAME(mux_i2s_clkout_p) = { "i2s_pre", "xin12m" }; PNAME(mux_spdif_p) = { "spdif_pre", "spdif_frac", "xin12m" }; PNAME(mux_spdif_8ch_p) = { "spdif_8ch_pre", "spdif_8ch_frac", "xin12m" }; -PNAME(mux_uart0_pll_p) = { "cpll", "gpll", "usbphy_480m_src", "npll" }; PNAME(mux_uart0_p) = { "uart0_src", "uart0_frac", "xin24m" }; PNAME(mux_uart1_p) = { "uart1_src", "uart1_frac", "xin24m" }; PNAME(mux_uart2_p) = { "uart2_src", "uart2_frac", "xin24m" }; @@ -427,7 +427,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKSEL_CON(33), 0, 5, DFLAGS, RK3288_CLKGATE_CON(5), 8, GFLAGS), - COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_cpll_gpll_usb480m_p, 0, + COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_cpll_gll_usb_npll_p, 0, RK3288_CLKSEL_CON(34), 6, 2, MFLAGS, 0, 5, DFLAGS, RK3288_CLKGATE_CON(5), 7, GFLAGS), @@ -504,7 +504,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKSEL_CON(38), 15, 1, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(5), 6, GFLAGS), - COMPOSITE(0, "uart0_src", mux_uart0_pll_p, 0, + COMPOSITE(0, "uart0_src", mux_pll_src_cpll_gll_usb_npll_p, 0, RK3288_CLKSEL_CON(13), 13, 2, MFLAGS, 0, 7, DFLAGS, RK3288_CLKGATE_CON(1), 8, GFLAGS), COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", 0, -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: kever.yang@rock-chips.com (Kever Yang) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH] clk: rockchip: add npll to source of sclk_gpu Date: Thu, 16 Oct 2014 15:46:36 -0700 [thread overview] Message-ID: <1413499597-23908-1-git-send-email-kever.yang@rock-chips.com> (raw) This patch make a common source for uart0 pll src and sclk_gpu, so that gpu can get its cloc from npll. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> --- drivers/clk/rockchip/clk-rk3288.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c index 504b6c2a..3f839cf 100644 --- a/drivers/clk/rockchip/clk-rk3288.c +++ b/drivers/clk/rockchip/clk-rk3288.c @@ -174,14 +174,14 @@ PNAME(mux_aclk_cpu_src_p) = { "cpll_aclk_cpu", "gpll_aclk_cpu" }; PNAME(mux_pll_src_cpll_gpll_p) = { "cpll", "gpll" }; PNAME(mux_pll_src_npll_cpll_gpll_p) = { "npll", "cpll", "gpll" }; PNAME(mux_pll_src_cpll_gpll_npll_p) = { "cpll", "gpll", "npll" }; -PNAME(mux_pll_src_cpll_gpll_usb480m_p) = { "cpll", "gpll", "usb480m" }; +PNAME(mux_pll_src_cpll_gpll_usb480m_p) = { "cpll", "gpll", "usbphy480m_src" }; +PNAME(mux_pll_src_cpll_gll_usb_npll_p) = { "cpll", "gpll", "usbphy480m_src", "npll" }; PNAME(mux_mmc_src_p) = { "cpll", "gpll", "xin24m", "xin24m" }; PNAME(mux_i2s_pre_p) = { "i2s_src", "i2s_frac", "ext_i2s", "xin12m" }; PNAME(mux_i2s_clkout_p) = { "i2s_pre", "xin12m" }; PNAME(mux_spdif_p) = { "spdif_pre", "spdif_frac", "xin12m" }; PNAME(mux_spdif_8ch_p) = { "spdif_8ch_pre", "spdif_8ch_frac", "xin12m" }; -PNAME(mux_uart0_pll_p) = { "cpll", "gpll", "usbphy_480m_src", "npll" }; PNAME(mux_uart0_p) = { "uart0_src", "uart0_frac", "xin24m" }; PNAME(mux_uart1_p) = { "uart1_src", "uart1_frac", "xin24m" }; PNAME(mux_uart2_p) = { "uart2_src", "uart2_frac", "xin24m" }; @@ -427,7 +427,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKSEL_CON(33), 0, 5, DFLAGS, RK3288_CLKGATE_CON(5), 8, GFLAGS), - COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_cpll_gpll_usb480m_p, 0, + COMPOSITE(SCLK_GPU, "sclk_gpu", mux_pll_src_cpll_gll_usb_npll_p, 0, RK3288_CLKSEL_CON(34), 6, 2, MFLAGS, 0, 5, DFLAGS, RK3288_CLKGATE_CON(5), 7, GFLAGS), @@ -504,7 +504,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = { RK3288_CLKSEL_CON(38), 15, 1, MFLAGS, 8, 5, DFLAGS, RK3288_CLKGATE_CON(5), 6, GFLAGS), - COMPOSITE(0, "uart0_src", mux_uart0_pll_p, 0, + COMPOSITE(0, "uart0_src", mux_pll_src_cpll_gll_usb_npll_p, 0, RK3288_CLKSEL_CON(13), 13, 2, MFLAGS, 0, 7, DFLAGS, RK3288_CLKGATE_CON(1), 8, GFLAGS), COMPOSITE_FRAC(0, "uart0_frac", "uart0_src", 0, -- 1.9.1
next reply other threads:[~2014-10-16 22:47 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-10-16 22:46 Kever Yang [this message] 2014-10-16 22:46 ` [PATCH] clk: rockchip: add npll to source of sclk_gpu Kever Yang 2014-10-20 12:03 ` Heiko Stübner 2014-10-20 12:03 ` Heiko Stübner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1413499597-23908-1-git-send-email-kever.yang@rock-chips.com \ --to=kever.yang@rock-chips.com \ --cc=cf@rock-chips.com \ --cc=dbasehore@chromium.org \ --cc=dianders@chromium.org \ --cc=dkl@rock-chips.com \ --cc=heiko@sntech.de \ --cc=huangtao@rock-chips.com \ --cc=jay.xu@rock-chips.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=linux@roeck-us.net \ --cc=mturquette@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.