All of lore.kernel.org
 help / color / mirror / Atom feed
From: Doug Anderson <dianders@chromium.org>
To: Linus Walleij <linus.walleij@linaro.org>,
	Heiko Stuebner <heiko@sntech.de>
Cc: Chris Zhong <zyw@rock-chips.com>,
	Sonny Rao <sonnyrao@chromium.org>,
	linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	Doug Anderson <dianders@chromium.org>,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock
Date: Tue, 21 Oct 2014 10:47:35 -0700	[thread overview]
Message-ID: <1413913655-22351-4-git-send-email-dianders@chromium.org> (raw)
In-Reply-To: <1413913655-22351-1-git-send-email-dianders@chromium.org>

There were a few instances where the rockchip pinctrl driver would do
read-modify-write with no spinlock.  Add a spinlock for these cases.

Signed-off-by: Doug Anderson <dianders@chromium.org>
---
Changes in v2:
- Made sure to release the lock in an error condition.

 drivers/pinctrl/pinctrl-rockchip.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 6c14f6c..59a5461 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -861,6 +861,7 @@ static int _rockchip_pmx_gpio_set_direction(struct gpio_chip *chip,
 {
 	struct rockchip_pin_bank *bank;
 	int ret;
+	unsigned long flags;
 	u32 data;
 
 	bank = gc_to_pin_bank(chip);
@@ -869,6 +870,8 @@ static int _rockchip_pmx_gpio_set_direction(struct gpio_chip *chip,
 	if (ret < 0)
 		return ret;
 
+	spin_lock_irqsave(&bank->slock, flags);
+
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
 	/* set bit to 1 for output, 0 for input */
 	if (!input)
@@ -877,6 +880,8 @@ static int _rockchip_pmx_gpio_set_direction(struct gpio_chip *chip,
 		data &= ~BIT(pin);
 	writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
 
+	spin_unlock_irqrestore(&bank->slock, flags);
+
 	return 0;
 }
 
@@ -1394,6 +1399,7 @@ static void rockchip_irq_demux(unsigned int irq, struct irq_desc *desc)
 	u32 polarity = 0, data = 0;
 	u32 pend;
 	bool edge_changed = false;
+	unsigned long flags;
 
 	dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name);
 
@@ -1439,10 +1445,14 @@ static void rockchip_irq_demux(unsigned int irq, struct irq_desc *desc)
 
 	if (bank->toggle_edge_mode && edge_changed) {
 		/* Interrupt params should only be set with ints disabled */
+		spin_lock_irqsave(&bank->slock, flags);
+
 		data = readl_relaxed(bank->reg_base + GPIO_INTEN);
 		writel_relaxed(0, bank->reg_base + GPIO_INTEN);
 		writel(polarity, bank->reg_base + GPIO_INT_POLARITY);
 		writel(data, bank->reg_base + GPIO_INTEN);
+
+		spin_unlock_irqrestore(&bank->slock, flags);
 	}
 
 	chained_irq_exit(chip, desc);
@@ -1456,6 +1466,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 	u32 polarity;
 	u32 level;
 	u32 data;
+	unsigned long flags;
 	int ret;
 
 	/* make sure the pin is configured as gpio input */
@@ -1463,15 +1474,20 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 	if (ret < 0)
 		return ret;
 
+	spin_lock_irqsave(&bank->slock, flags);
+
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
 	data &= ~mask;
 	writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
 
+	spin_unlock_irqrestore(&bank->slock, flags);
+
 	if (type & IRQ_TYPE_EDGE_BOTH)
 		__irq_set_handler_locked(d->irq, handle_edge_irq);
 	else
 		__irq_set_handler_locked(d->irq, handle_level_irq);
 
+	spin_lock_irqsave(&bank->slock, flags);
 	irq_gc_lock(gc);
 
 	level = readl_relaxed(gc->reg_base + GPIO_INTTYPE_LEVEL);
@@ -1514,6 +1530,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 		break;
 	default:
 		irq_gc_unlock(gc);
+		spin_unlock_irqrestore(&bank->slock, flags);
 		return -EINVAL;
 	}
 
@@ -1521,6 +1538,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 	writel_relaxed(polarity, gc->reg_base + GPIO_INT_POLARITY);
 
 	irq_gc_unlock(gc);
+	spin_unlock_irqrestore(&bank->slock, flags);
 
 	return 0;
 }
-- 
2.1.0.rc2.206.gedb03e5


WARNING: multiple messages have this Message-ID (diff)
From: dianders@chromium.org (Doug Anderson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock
Date: Tue, 21 Oct 2014 10:47:35 -0700	[thread overview]
Message-ID: <1413913655-22351-4-git-send-email-dianders@chromium.org> (raw)
In-Reply-To: <1413913655-22351-1-git-send-email-dianders@chromium.org>

There were a few instances where the rockchip pinctrl driver would do
read-modify-write with no spinlock.  Add a spinlock for these cases.

Signed-off-by: Doug Anderson <dianders@chromium.org>
---
Changes in v2:
- Made sure to release the lock in an error condition.

 drivers/pinctrl/pinctrl-rockchip.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 6c14f6c..59a5461 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -861,6 +861,7 @@ static int _rockchip_pmx_gpio_set_direction(struct gpio_chip *chip,
 {
 	struct rockchip_pin_bank *bank;
 	int ret;
+	unsigned long flags;
 	u32 data;
 
 	bank = gc_to_pin_bank(chip);
@@ -869,6 +870,8 @@ static int _rockchip_pmx_gpio_set_direction(struct gpio_chip *chip,
 	if (ret < 0)
 		return ret;
 
+	spin_lock_irqsave(&bank->slock, flags);
+
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
 	/* set bit to 1 for output, 0 for input */
 	if (!input)
@@ -877,6 +880,8 @@ static int _rockchip_pmx_gpio_set_direction(struct gpio_chip *chip,
 		data &= ~BIT(pin);
 	writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
 
+	spin_unlock_irqrestore(&bank->slock, flags);
+
 	return 0;
 }
 
@@ -1394,6 +1399,7 @@ static void rockchip_irq_demux(unsigned int irq, struct irq_desc *desc)
 	u32 polarity = 0, data = 0;
 	u32 pend;
 	bool edge_changed = false;
+	unsigned long flags;
 
 	dev_dbg(bank->drvdata->dev, "got irq for bank %s\n", bank->name);
 
@@ -1439,10 +1445,14 @@ static void rockchip_irq_demux(unsigned int irq, struct irq_desc *desc)
 
 	if (bank->toggle_edge_mode && edge_changed) {
 		/* Interrupt params should only be set with ints disabled */
+		spin_lock_irqsave(&bank->slock, flags);
+
 		data = readl_relaxed(bank->reg_base + GPIO_INTEN);
 		writel_relaxed(0, bank->reg_base + GPIO_INTEN);
 		writel(polarity, bank->reg_base + GPIO_INT_POLARITY);
 		writel(data, bank->reg_base + GPIO_INTEN);
+
+		spin_unlock_irqrestore(&bank->slock, flags);
 	}
 
 	chained_irq_exit(chip, desc);
@@ -1456,6 +1466,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 	u32 polarity;
 	u32 level;
 	u32 data;
+	unsigned long flags;
 	int ret;
 
 	/* make sure the pin is configured as gpio input */
@@ -1463,15 +1474,20 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 	if (ret < 0)
 		return ret;
 
+	spin_lock_irqsave(&bank->slock, flags);
+
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
 	data &= ~mask;
 	writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
 
+	spin_unlock_irqrestore(&bank->slock, flags);
+
 	if (type & IRQ_TYPE_EDGE_BOTH)
 		__irq_set_handler_locked(d->irq, handle_edge_irq);
 	else
 		__irq_set_handler_locked(d->irq, handle_level_irq);
 
+	spin_lock_irqsave(&bank->slock, flags);
 	irq_gc_lock(gc);
 
 	level = readl_relaxed(gc->reg_base + GPIO_INTTYPE_LEVEL);
@@ -1514,6 +1530,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 		break;
 	default:
 		irq_gc_unlock(gc);
+		spin_unlock_irqrestore(&bank->slock, flags);
 		return -EINVAL;
 	}
 
@@ -1521,6 +1538,7 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 	writel_relaxed(polarity, gc->reg_base + GPIO_INT_POLARITY);
 
 	irq_gc_unlock(gc);
+	spin_unlock_irqrestore(&bank->slock, flags);
 
 	return 0;
 }
-- 
2.1.0.rc2.206.gedb03e5

  parent reply	other threads:[~2014-10-21 17:47 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-21 17:47 [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled Doug Anderson
2014-10-21 17:47 ` Doug Anderson
2014-10-21 17:47 ` [PATCH v2 2/4] pinctrl: rockchip: Don't call pinctrl_gpio_direction_output() in pin_config_set() Doug Anderson
2014-10-21 17:47   ` Doug Anderson
2014-10-23 16:34   ` Heiko Stübner
2014-10-23 16:34     ` Heiko Stübner
2014-10-21 17:47 ` [PATCH v2 3/4] pinctrl: rockchip: Parse pin groups before calling pinctrl_register() Doug Anderson
2014-10-21 17:47   ` Doug Anderson
2014-10-23 16:26   ` Heiko Stübner
2014-10-23 16:26     ` Heiko Stübner
2014-10-28 17:03     ` Linus Walleij
2014-10-28 17:03       ` Linus Walleij
2014-10-21 17:47 ` Doug Anderson [this message]
2014-10-21 17:47   ` [PATCH v2 4/4] pinctrl: rockchip: Protect read-modify-write with the spinlock Doug Anderson
2014-10-23 16:32   ` Heiko Stübner
2014-10-23 16:32     ` Heiko Stübner
2014-10-23 16:43 ` [PATCH v2 1/4] pinctrl: rockchip: Set wake_enabled Heiko Stübner
2014-10-23 16:43   ` Heiko Stübner
2014-10-23 16:55   ` Doug Anderson
2014-10-23 16:55     ` Doug Anderson
2014-10-23 23:55     ` Heiko Stübner
2014-10-23 23:55       ` Heiko Stübner
2014-10-29 21:29 ` Heiko Stübner
2014-10-29 21:29   ` Heiko Stübner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413913655-22351-4-git-send-email-dianders@chromium.org \
    --to=dianders@chromium.org \
    --cc=heiko@sntech.de \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=sonnyrao@chromium.org \
    --cc=zyw@rock-chips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.