All of lore.kernel.org
 help / color / mirror / Atom feed
From: Steve Longerbeam <slongerbeam@gmail.com>
To: dri-devel@lists.freedesktop.org
Subject: [PATCH 49/72] imx-drm: imx-ldb: Add DDC support
Date: Fri, 31 Oct 2014 15:54:32 -0700	[thread overview]
Message-ID: <1414796095-10107-50-git-send-email-steve_longerbeam@mentor.com> (raw)
In-Reply-To: <1414796095-10107-1-git-send-email-steve_longerbeam@mentor.com>

Add support for reading EDID over Display Data Channel. If no DDC
adapter is available, falls back to hardcoded EDID or display-timings
node as before.

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
---
 drivers/staging/imx-drm/imx-ldb.c |   39 +++++++++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/imx-drm/imx-ldb.c b/drivers/staging/imx-drm/imx-ldb.c
index 1eb632f..6c16cf2 100644
--- a/drivers/staging/imx-drm/imx-ldb.c
+++ b/drivers/staging/imx-drm/imx-ldb.c
@@ -61,6 +61,7 @@ struct imx_ldb_channel {
 	struct drm_connector connector;
 	struct drm_encoder encoder;
 	struct device_node *child;
+	struct i2c_adapter *ddc;
 	int chno;
 	void *edid;
 	int edid_len;
@@ -103,6 +104,9 @@ static int imx_ldb_connector_get_modes(struct drm_connector *connector)
 
 	imx_ldb_entry_dbg(imx_ldb_ch);
 
+	if (!imx_ldb_ch->edid && imx_ldb_ch->ddc)
+		imx_ldb_ch->edid = drm_get_edid(connector, imx_ldb_ch->ddc);
+
 	if (imx_ldb_ch->edid) {
 		drm_mode_connector_update_edid_property(connector,
 							imx_ldb_ch->edid);
@@ -529,6 +533,7 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 
 	for_each_child_of_node(np, child) {
 		struct imx_ldb_channel *channel;
+		struct device_node *ddc_node;
 
 		ret = of_property_read_u32(child, "reg", &i);
 		if (ret || i < 0 || i > 1)
@@ -547,14 +552,30 @@ static int imx_ldb_bind(struct device *dev, struct device *master, void *data)
 		channel->chno = i;
 		channel->child = child;
 
-		edidp = of_get_property(child, "edid", &channel->edid_len);
-		if (edidp) {
-			channel->edid = kmemdup(edidp, channel->edid_len,
-						GFP_KERNEL);
-		} else {
-			ret = of_get_drm_display_mode(child, &channel->mode, 0);
-			if (!ret)
-				channel->mode_valid = 1;
+		ddc_node = of_parse_phandle(child, "ddc-i2c-bus", 0);
+		if (ddc_node) {
+			channel->ddc = of_find_i2c_adapter_by_node(ddc_node);
+			of_node_put(ddc_node);
+		}
+
+		if (!channel->ddc) {
+			/* if no DDC available, fallback to hardcoded EDID */
+			dev_dbg(dev, "no ddc available\n");
+
+			edidp = of_get_property(child, "edid",
+						&channel->edid_len);
+			if (edidp) {
+				channel->edid = kmemdup(edidp,
+							channel->edid_len,
+							GFP_KERNEL);
+			} else {
+				/* fallback to display-timings node */
+				ret = of_get_drm_display_mode(child,
+							      &channel->mode,
+							      0);
+				if (!ret)
+					channel->mode_valid = 1;
+			}
 		}
 
 		ret = of_property_read_u32(child, "fsl,data-width", &datawidth);
@@ -616,6 +637,8 @@ static void imx_ldb_unbind(struct device *dev, struct device *master,
 
 		channel->connector.funcs->destroy(&channel->connector);
 		channel->encoder.funcs->destroy(&channel->encoder);
+
+		i2c_put_adapter(channel->ddc);
 	}
 }
 
-- 
1.7.9.5

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

  parent reply	other threads:[~2014-10-31 22:57 UTC|newest]

Thread overview: 115+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-31 22:53 [PATCH 00/72] staging imx-drm new features and fixes Steve Longerbeam
2014-10-31 22:53 ` [PATCH 01/72] ARM: dts: imx6qdl-sabrelite: Add HDMI device Steve Longerbeam
2014-10-31 22:53 ` [PATCH 02/72] ARM: dts: imx6qdl-sabreauto: " Steve Longerbeam
2014-10-31 22:53 ` [PATCH 03/72] ARM: dts: imx6qdl: Create imx-drm crtc nodes Steve Longerbeam
2014-11-03 12:31   ` Philipp Zabel
2014-11-03 17:09     ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 04/72] ARM: i.MX6: use pll2_pfd0_352m as clock root of ipu_di Steve Longerbeam
2014-11-03 12:30   ` Philipp Zabel
2014-11-03 19:10     ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 05/72] ARM: i.MX6: select pll3_usb_otg for ldb_di for rev 1.0 chip Steve Longerbeam
2014-11-03 12:30   ` Philipp Zabel
2014-11-03 19:17     ` Steve Longerbeam
2014-11-03 20:06       ` Fabio Estevam
2014-11-04  2:38         ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 06/72] gpu: ipu-cpmem: Add ipu_cpmem_set_uv_offset() Steve Longerbeam
2014-11-03 12:30   ` Philipp Zabel
2014-11-03 22:52     ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 07/72] gpu: ipu-v3: Add ipu_dp_set_chroma_key() Steve Longerbeam
2014-11-03 12:31   ` Philipp Zabel
2014-11-04  1:55     ` Steve Longerbeam
2014-10-31 22:53 ` [PATCH 08/72] gpu: ipu-v3: Add ipu_dp_set_gamma_correction() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 09/72] gpu: ipu-v3: Add support for dynamic DC interface pixel maps Steve Longerbeam
2014-10-31 22:53 ` [PATCH 10/72] gpu: ipu-v3: Add ipu_dc_uninit_sync() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 11/72] gpu: ipu-v3: Pass struct ipu_dc to enable/disable Steve Longerbeam
2014-10-31 22:53 ` [PATCH 12/72] gpu: ipu-v3: Add ipu_dp_uninit_channel() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 13/72] gpu: ipu-v3: Pass struct ipu_dp to enable/disable Steve Longerbeam
2014-10-31 22:53 ` [PATCH 14/72] gpu: ipu-v3: Implement use counter for ipu_dc_enable(), ipu_dc_disable() Steve Longerbeam
2014-10-31 22:53 ` [PATCH 15/72] gpu: ipu-v3: fix HDMI timing issues Steve Longerbeam
2014-10-31 22:53 ` [PATCH 16/72] gpu: ipu-v3: Add DMFC/DP/DC/DI module enable/disable debug Steve Longerbeam
2014-10-31 22:54 ` [PATCH 17/72] gpu: ipu-v3: Add ipu_di_uninit_sync_panel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 18/72] gpu: ipu-v3: Split out DI clock enable/disable Steve Longerbeam
2014-10-31 22:54 ` [PATCH 19/72] gpu: ipu-v3: Protect more CM reg access with IPU lock Steve Longerbeam
2014-11-04 17:51   ` Philipp Zabel
2014-11-05  1:54     ` Steve Longerbeam
2014-11-05  1:55     ` Steve Longerbeam
2014-10-31 22:54 ` [PATCH 20/72] gpu: ipu-v3: Move DI waveform counter enable/disable to ipu-di Steve Longerbeam
2014-10-31 22:54 ` [PATCH 21/72] gpu: ipu-v3: Update DP sync SRM always in ipu_dp_enable_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 22/72] gpu: ipu-v3: Fix indent/ws in ipu-dmfc Steve Longerbeam
2014-10-31 22:54 ` [PATCH 23/72] gpu: ipu-v3: Allow burstsize of 20 in ipu_dmfc_setup_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 24/72] gpu: ipu-v3: Remove ipu_dmfc_init_channel() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 25/72] gpu: ipu-v3: Consolidate mutex lock in ipu_dmfc_alloc_bandwidth() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 26/72] gpu: ipu-v3: Enumerate the DC channel names Steve Longerbeam
2014-10-31 22:54 ` [PATCH 27/72] gpu: ipu-di: Move ipu pointer init Steve Longerbeam
2014-10-31 22:54 ` [PATCH 28/72] gpu: ipu-di: Add and improve debug/error messages Steve Longerbeam
2014-10-31 22:54 ` [PATCH 29/72] gpu: ipu-v3: Change signal names in struct ipu_di_signal_cfg Steve Longerbeam
2014-10-31 22:54 ` [PATCH 30/72] gpu: ipu-v3: Remove IPU client registration Steve Longerbeam
2014-10-31 22:54 ` [PATCH 31/72] gpu: ipu-di: Set rate of DI pre clock Steve Longerbeam
2014-10-31 22:54 ` [PATCH 32/72] gpu: ipu-v3: Add RGB666 interface pixel map Steve Longerbeam
2014-10-31 22:54 ` [PATCH 33/72] gpu: ipu-cpmem: Pass drm fourcc to ipu_cpmem_set_yuv_* Steve Longerbeam
2014-10-31 22:54 ` [PATCH 34/72] gpu: ipu-v3: Add ipu_drm_fourcc_is_planar() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 35/72] gpu: ipu-v3: Add IDMA channel linking support Steve Longerbeam
2014-10-31 22:54 ` [PATCH 36/72] gpu: ipu-cpmem: Support YVU422 Steve Longerbeam
2014-10-31 22:54 ` [PATCH 37/72] gpu: ipu-cpmem: Add ipu_cpmem_get_burstsize() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 38/72] imx-drm: Crtcs moved to device tree Steve Longerbeam
2014-10-31 22:54 ` [PATCH 39/72] imx-drm: hdmi: optimize i2c write wait Steve Longerbeam
2014-10-31 22:54 ` [PATCH 40/72] imx-drm: parallel-display: Support RGB666 pixel fmt Steve Longerbeam
2014-10-31 22:54 ` [PATCH 41/72] imx-drm: imx-ldb: Add debug to connector/encoder entry points Steve Longerbeam
2014-10-31 22:54 ` [PATCH 42/72] imx-drm: imx-ldb: Implement imx_ldb_encoder_dpms() Steve Longerbeam
2014-10-31 22:54 ` [PATCH 43/72] imx-drm: parallel-display: Fix typo when setting mode type Steve Longerbeam
2014-10-31 22:54 ` [PATCH 44/72] imx-drm: ipuv3-plane: Fix planar formats Steve Longerbeam
2014-10-31 22:54 ` [PATCH 45/72] imx-drm: ipuv3-plane: Allow YUV space for background plane Steve Longerbeam
2014-10-31 22:54 ` [PATCH 46/72] imx-drm: ipuv3-plane: Add more supported pixel formats Steve Longerbeam
2014-10-31 22:54 ` [PATCH 47/72] imx-drm: ipuv3-plane: Implement global alpha and colorkey properties Steve Longerbeam
2014-10-31 22:54 ` [PATCH 48/72] imx-drm: hdmi: rework irq request/free Steve Longerbeam
2014-10-31 22:54 ` Steve Longerbeam [this message]
2014-11-04 17:52   ` [PATCH 49/72] imx-drm: imx-ldb: Add DDC support Philipp Zabel
2014-10-31 22:54 ` [PATCH 50/72] imx-drm: Fix separate primary plane objects Steve Longerbeam
2014-10-31 22:54 ` [PATCH 51/72] imx-drm: Move page flip handling to plane driver Steve Longerbeam
2014-10-31 22:54 ` [PATCH 52/72] imx-drm: Reset ipu unit pointers to NULL on errors Steve Longerbeam
2014-10-31 22:54 ` [PATCH 53/72] drm: implement page flipping support for planes Steve Longerbeam
2014-11-01 13:25   ` Rob Clark
2014-10-31 22:54 ` [PATCH 54/72] imx-drm: ipuv3-plane: Assign page_flip method to drm_plane_funcs Steve Longerbeam
2014-10-31 22:54 ` [PATCH 55/72] imx-drm: Implement DRM gamma set Steve Longerbeam
2014-10-31 22:54 ` [PATCH 56/72] imx-drm: Implement custom ioctl to set gamma Steve Longerbeam
2014-10-31 22:54 ` [PATCH 57/72] imx-drm: Add support for interface pixel maps Steve Longerbeam
2014-10-31 22:54 ` [PATCH 58/72] imx-drm: parallel-display: Add interface-pix-map DT property Steve Longerbeam
2014-10-31 22:54 ` [PATCH 59/72] imx-drm: hdmi: set DI clock source to DI pre clock Steve Longerbeam
2014-10-31 22:54 ` [PATCH 60/72] imx-drm: ipuv3-crtc: Set the crtc device name Steve Longerbeam
2014-10-31 22:54 ` [PATCH 61/72] imx-drm: hdmi: Save ipu/di mux for later iomux setup Steve Longerbeam
2014-10-31 22:54 ` [PATCH 62/72] imx-drm: ipuv3-plane: Assign correct dmfc burst size Steve Longerbeam
2014-10-31 22:54 ` [PATCH 63/72] drm_modes: videomode: add pos/neg pixel clock polarity flag Steve Longerbeam
2014-10-31 22:54 ` [PATCH 64/72] imx-drm: ipuv3-crtc: Use DRM mode flags to configure pixel clock polarity Steve Longerbeam
2014-10-31 22:54 ` [PATCH 65/72] imx-drm: imx-ldb: Add all defined of video modes Steve Longerbeam
2014-10-31 22:54 ` [PATCH 66/72] imx-drm: parallel-display: " Steve Longerbeam
2014-10-31 22:54 ` [PATCH 67/72] imx-drm: ipuv3-crtc: Disable fb on crtc unbind Steve Longerbeam
2014-10-31 22:54 ` [PATCH 68/72] imx-drm: imx-ldb: Use DDC probe as connection detect Steve Longerbeam
2014-11-04 17:57   ` Philipp Zabel
2014-10-31 22:54 ` [PATCH 69/72] imx-drm: ipuv3-crtc: Implement mode_set_base Steve Longerbeam
2014-10-31 22:54 ` [PATCH 70/72] imx-drm: Cancel pending page flip events at preclose Steve Longerbeam
2014-10-31 22:54 ` [PATCH 71/72] imx-drm: ipuv3-crtc: Disable overlay plane during crtc disable Steve Longerbeam
2014-10-31 22:54 ` [PATCH 72/72] imx-drm: ipuv3-plane: Enable 8 burst locking Steve Longerbeam
2014-11-01  0:09 ` [PATCH 00/72] staging imx-drm new features and fixes Fabio Estevam
2014-11-01  0:19   ` Steve Longerbeam
2014-11-03 13:12     ` Fabio Estevam
2014-11-03 13:17       ` Fabio Estevam
2014-11-03 13:20       ` Fabio Estevam
2014-11-03 14:13         ` Fabio Estevam
2014-11-03 22:41           ` Steve Longerbeam
2014-11-04 15:15             ` Fabio Estevam
2014-11-02  3:03   ` Steve Longerbeam
2014-11-03 11:17 ` Zubair Lutfullah Kakakhel
2014-11-03 16:04   ` Rob Clark
2014-11-03 16:12 ` Daniel Vetter
2014-11-03 16:14   ` Greg KH
2014-11-03 17:17     ` Daniel Vetter
2014-11-03 17:48       ` Greg KH
2014-11-03 18:58         ` Steve Longerbeam
2014-11-04  2:32           ` Alex Deucher
2014-11-03 18:59         ` Steve Longerbeam
2014-11-03 20:00           ` Fabio Estevam
2014-11-03 22:11             ` Steve Longerbeam
2014-11-04  9:35           ` Philipp Zabel
2014-11-05  1:20             ` Steve Longerbeam
2015-01-17 19:45               ` Fabio Estevam
2015-01-21 17:22 ` Rob Clark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414796095-10107-50-git-send-email-steve_longerbeam@mentor.com \
    --to=slongerbeam@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.