From: Kishon Vijay Abraham I <kishon@ti.com> To: <chris@printf.net>, <ulf.hansson@linaro.org>, <tony@atomide.com> Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-mmc@vger.kernel.org>, <linux-omap@vger.kernel.org>, <afenkart@gmail.com>, <nsekhar@ti.com>, <kishon@ti.com> Subject: [RFC PATCH 2/3] mmc: omap_hsmmc: add tuning support Date: Thu, 13 Nov 2014 20:24:17 +0530 [thread overview] Message-ID: <1415890458-20436-3-git-send-email-kishon@ti.com> (raw) In-Reply-To: <1415890458-20436-1-git-send-email-kishon@ti.com> From: Balaji T K <balajitk@ti.com> MMC tuning procedure is required to support SD card UHS1-SDR104 mode and EMMC HS200 mode. The tuning function omap_execute_tuning() will only be called by the MMC/SD core if the corresponding speed modes are supported by the OMAP silicon which is set in the mmc host "caps" field. Signed-off-by: Viswanath Puttagunta <vishp@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> [ kishon@ti.com : Set the functional clock to 192MHz if the contoller supports HS200 ] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/mmc/host/omap_hsmmc.c | 325 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 322 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 2e42ed3..675bd31d 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -22,6 +22,7 @@ #include <linux/dmaengine.h> #include <linux/seq_file.h> #include <linux/sizes.h> +#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/dma-mapping.h> @@ -47,6 +48,7 @@ /* OMAP HSMMC Host Controller Registers */ #define OMAP_HSMMC_SYSSTATUS 0x0014 #define OMAP_HSMMC_CON 0x002C +#define OMAP_HSMMC_DLL 0x0034 #define OMAP_HSMMC_SDMASA 0x0100 #define OMAP_HSMMC_BLK 0x0104 #define OMAP_HSMMC_ARG 0x0108 @@ -100,6 +102,7 @@ #define CLKEXTFREE (1 << 16) #define CTPL (1 << 11) #define DW8 (1 << 5) +#define BRR (1 << 5) #define OD 0x1 #define STAT_CLEAR 0xFFFFFFFF #define INIT_STREAM_CMD 0x00000000 @@ -129,6 +132,20 @@ #define CERR_EN (1 << 28) #define BADA_EN (1 << 29) +#define V1V8_SIGEN (1 << 19) +#define AC12_SCLK_SEL (1 << 23) +#define AC12_UHSMC_MASK (7 << 16) +#define AC12_UHSMC_SDR50 (2 << 16) +#define AC12_UHSMC_SDR104 (3 << 16) +#define DLL_LOCK (1 << 0) +#define DLL_CALIB (1 << 1) +#define DLL_UNLOCK_STICKY (1 << 2) +#define DLL_SWT (1 << 20) +#define DLL_FORCE_SR_C_MASK (0x7F << 13) +#define DLL_FORCE_SR_C_SHIFT 13 +#define DLL_FORCE_VALUE (1 << 12) +#define DLL_RESET (1 << 31) + #define INT_EN_MASK (BADA_EN | CERR_EN | ACE_EN | DEB_EN | DCRC_EN |\ DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | \ BRR_EN | BWR_EN | TC_EN | CC_EN) @@ -143,18 +160,23 @@ #define SDR50 (1 << 0) #define SDR104 (1 << 1) #define DDR50 (1 << 2) +#define CAPA2_TSDR50 (1 << 13) #define MMC_AUTOSUSPEND_DELAY 100 #define MMC_TIMEOUT_MS 20 /* 20 mSec */ #define MMC_TIMEOUT_US 20000 /* 20000 micro Sec */ #define OMAP_MMC_MIN_CLOCK 400000 #define OMAP_MMC_MAX_CLOCK 52000000 +#define MAX_PHASE_DELAY 0x7F #define DRIVER_NAME "omap_hsmmc" #define VDD_1V8 1800000 /* 180000 uV */ #define VDD_3V0 3000000 /* 300000 uV */ #define VDD_165_195 (ffs(MMC_VDD_165_195) - 1) +#define EMMC_HSDDR_SD_SDR25_MAX 52000000 +#define SD_SDR50_MAX_FREQ 104000000 + /* * One controller can have multiple slots, like on some omap boards using * omap.c controller driver. Luckily this is not currently done on any known @@ -198,6 +220,7 @@ struct omap_hsmmc_host { void __iomem *base; resource_size_t mapbase; spinlock_t irq_lock; /* Prevent races with irq handler */ + struct completion buf_ready; unsigned int dma_len; unsigned int dma_sg_idx; unsigned char bus_mode; @@ -224,6 +247,13 @@ struct omap_hsmmc_host { #define AUTO_CMD23 (1 << 0) /* Auto CMD23 support */ #define HSMMC_SDIO_IRQ_ENABLED (1 << 1) /* SDIO irq enabled */ #define HSMMC_WAKE_IRQ_ENABLED (1 << 2) + + u32 *tuning_data; + int tuning_size; + int tuning_done; + int tuning_fsrc; + u32 tuning_uhsmc; + u32 tuning_opcode; struct omap_hsmmc_next next_data; struct omap_mmc_platform_data *pdata; }; @@ -233,6 +263,48 @@ struct omap_mmc_of_data { u8 controller_flags; }; +static const u32 ref_tuning_4bits[] = { + 0x00FF0FFF, 0xCCC3CCFF, 0xFFCC3CC3, 0xEFFEFFFE, + 0xDDFFDFFF, 0xFBFFFBFF, 0xFF7FFFBF, 0xEFBDF777, + 0xF0FFF0FF, 0x3CCCFC0F, 0xCFCC33CC, 0xEEFFEFFF, + 0xFDFFFDFF, 0xFFBFFFDF, 0xFFF7FFBB, 0xDE7B7FF7 +}; + +static const u32 ref_tuning_8bits[] = { + 0xFF00FFFF, 0x0000FFFF, 0xCCCCFFFF, 0xCCCC33CC, + 0xCC3333CC, 0xFFFFCCCC, 0xFFFFEEFF, 0xFFEEEEFF, + 0xFFDDFFFF, 0xDDDDFFFF, 0xBBFFFFFF, 0xBBFFFFFF, + 0xFFFFFFBB, 0XFFFFFF77, 0x77FF7777, 0xFFEEDDBB, + 0x00FFFFFF, 0x00FFFFFF, 0xCCFFFF00, 0xCC33CCCC, + 0x3333CCCC, 0xFFCCCCCC, 0xFFEEFFFF, 0xEEEEFFFF, + 0xDDFFFFFF, 0xDDFFFFFF, 0xFFFFFFDD, 0XFFFFFFBB, + 0xFFFFBBBB, 0xFFFF77FF, 0xFF7777FF, 0xEEDDBB77 +}; + +static inline int omap_hsmmc_set_dll(struct omap_hsmmc_host *host, int count) +{ + int i; + u32 dll; + + dll = OMAP_HSMMC_READ(host->base, DLL); + dll &= ~(DLL_FORCE_SR_C_MASK); + dll &= ~DLL_CALIB; + dll |= (count << DLL_FORCE_SR_C_SHIFT); + OMAP_HSMMC_WRITE(host->base, DLL, dll); + dll |= DLL_FORCE_VALUE; + OMAP_HSMMC_WRITE(host->base, DLL, dll); + dll |= DLL_CALIB; + OMAP_HSMMC_WRITE(host->base, DLL, dll); + for (i = 0; i < 1000; i++) { + if (OMAP_HSMMC_READ(host->base, DLL) & DLL_CALIB) + break; + } + dll &= ~DLL_CALIB; + dll = OMAP_HSMMC_READ(host->base, DLL); + + return 0; +} + static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host); static int omap_hsmmc_card_detect(struct device *dev, int slot) @@ -531,7 +603,10 @@ static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host, u32 irq_mask = INT_EN_MASK; unsigned long flags; - if (host->use_dma) + if ((cmd->opcode == MMC_SEND_TUNING_BLOCK) || + (cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)) + irq_mask |= BRR_EN; + else if (host->use_dma) irq_mask &= ~(BRR_EN | BWR_EN); /* Disable timeout for erases */ @@ -578,6 +653,33 @@ static u16 calc_divisor(struct omap_hsmmc_host *host, struct mmc_ios *ios) return dsor; } +static inline int omap_hsmmc_restore_dll(struct omap_hsmmc_host *host) +{ + u32 ac12; + u32 dll; + + ac12 = OMAP_HSMMC_READ(host->base, AC12); + ac12 |= host->tuning_uhsmc; + OMAP_HSMMC_WRITE(host->base, AC12, ac12); + + dll = OMAP_HSMMC_READ(host->base, DLL); + dll |= DLL_FORCE_VALUE; + OMAP_HSMMC_WRITE(host->base, DLL, dll); + + if (omap_hsmmc_set_dll(host, host->tuning_fsrc)) + return -EIO; + return 0; +} + +static inline void omap_hsmmc_save_dll(struct omap_hsmmc_host *host) +{ + u32 ac12; + + ac12 = OMAP_HSMMC_READ(host->base, AC12); + ac12 &= ~AC12_UHSMC_MASK; + OMAP_HSMMC_WRITE(host->base, AC12, ac12); +} + static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host) { struct mmc_ios *ios = &host->mmc->ios; @@ -589,6 +691,9 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host) omap_hsmmc_stop_clock(host); + if (host->mmc->caps2 & MMC_CAP2_HS200) + clk_set_rate(host->fclk, 192000000); + regval = OMAP_HSMMC_READ(host->base, SYSCTL); regval = regval & ~(CLKD_MASK | DTO_MASK); clkdiv = calc_divisor(host, ios); @@ -667,7 +772,6 @@ static void omap_hsmmc_set_bus_mode(struct omap_hsmmc_host *host) } #ifdef CONFIG_PM - /* * Restore the MMC host context, if it was lost as result of a * power state change. @@ -878,6 +982,12 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd, if (host->use_dma) cmdreg |= DMAE; + /* Tuning command is special. Data Present Select should be set */ + if ((cmd->opcode == MMC_SEND_TUNING_BLOCK) || + (cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)) { + cmdreg = (cmd->opcode << 24) | (resptype << 16) | + (cmdtype << 22) | DP_SELECT | DDIR; + } host->req_in_progress = 1; OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg); @@ -965,6 +1075,9 @@ omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd) return; } + if (host->cmd->opcode == MMC_SEND_TUNING_BLOCK) + return; + host->cmd = NULL; if (cmd->flags & MMC_RSP_PRESENT) { @@ -1104,6 +1217,7 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status) struct mmc_data *data; int end_cmd = 0, end_trans = 0; int error = 0; + int i = 0; data = host->data; dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); @@ -1139,6 +1253,15 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status) } OMAP_HSMMC_WRITE(host->base, STAT, status); + + if (status & BRR_EN) { + for (i = 0; i < host->tuning_size/4; i++) + host->tuning_data[i] = + OMAP_HSMMC_READ(host->base, DATA); + complete(&host->buf_ready); + return; + } + if (end_cmd || ((status & CC_EN) && host->cmd)) omap_hsmmc_cmd_done(host, host->cmd); if ((end_trans || (status & TC_EN)) && host->mrq) @@ -1844,6 +1967,189 @@ static int omap_hsmmc_multi_io_quirk(struct mmc_card *card, return blk_size; } +static int omap_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct omap_hsmmc_host *host; + struct mmc_ios *ios = &mmc->ios; + const u32 *tuning_ref; + int phase_delay = 0; + int err = 0; + int count = 0; + int length = 0; + int note_index = 0xFF; + int max_index = 0; + int max_window = 0; + bool previous_match = false; + bool current_match; + u32 ac12, capa2, dll = 0; + + host = mmc_priv(mmc); + switch (ios->bus_width) { + case MMC_BUS_WIDTH_8: + tuning_ref = ref_tuning_8bits; + host->tuning_size = sizeof(ref_tuning_8bits); + break; + case MMC_BUS_WIDTH_4: + tuning_ref = ref_tuning_4bits; + host->tuning_size = sizeof(ref_tuning_4bits); + break; + default: + return -EINVAL; + } + + host->tuning_data = kzalloc(host->tuning_size, GFP_KERNEL); + if (!host->tuning_data) + return -ENOMEM; + + host->tuning_done = 0; + /* clock tuning is not needed for upto 52MHz */ + if (ios->clock <= EMMC_HSDDR_SD_SDR25_MAX) + return 0; + + omap_hsmmc_stop_clock(host); + + ac12 = OMAP_HSMMC_READ(host->base, AC12); + capa2 = OMAP_HSMMC_READ(host->base, CAPA2); + + ac12 &= ~AC12_UHSMC_MASK; + OMAP_HSMMC_WRITE(host->base, AC12, ac12); + + /* + * Host Controller needs tuning only in case of SDR104 mode + * and for SDR50 mode when Use Tuning for SDR50 is set in + * Capabilities register. + */ + if (ios->clock <= SD_SDR50_MAX_FREQ) { + if (!(capa2 & CAPA2_TSDR50)) + return 0; + ac12 |= AC12_UHSMC_SDR50; + } else { + ac12 |= AC12_UHSMC_SDR104; + } + + ac12 |= AC12_UHSMC_SDR104; + ac12 |= V1V8_SIGEN; + + /* Enable SDR50/SDR104 mode */ + OMAP_HSMMC_WRITE(host->base, AC12, ac12); + omap_hsmmc_start_clock(host); + + /* Start software tuning Procedure */ + dll |= DLL_SWT; + OMAP_HSMMC_WRITE(host->base, DLL, dll); + + while (phase_delay < MAX_PHASE_DELAY) { + struct mmc_command cmd = {0}; + struct mmc_request mrq = {0}; + + if (phase_delay > MAX_PHASE_DELAY) + break; + + omap_hsmmc_set_dll(host, phase_delay); + + cmd.opcode = opcode; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + cmd.retries = 0; + cmd.data = NULL; + cmd.error = 0; + + mrq.cmd = &cmd; + host->mrq = &mrq; + + OMAP_HSMMC_WRITE(host->base, BLK, host->tuning_size); + set_data_timeout(host, 50000000, 0); + omap_hsmmc_start_command(host, &cmd, NULL); + + host->cmd = NULL; + host->mrq = NULL; + + /* Wait for Buffer Read Ready interrupt */ + err = wait_for_completion_timeout(&host->buf_ready, + msecs_to_jiffies(5000)); + omap_hsmmc_disable_irq(host); + host->req_in_progress = 0; + + if (err == 0) { + dev_err(mmc_dev(host->mmc), + "Tuning BRR timeout. phase_delay=%x", + phase_delay); + err = -ETIMEDOUT; + goto tuning_error; + } + + current_match = true; + if (memcmp(host->tuning_data, tuning_ref, host->tuning_size)) + current_match = false; + else + current_match = true; + + if (current_match == true) { + if (previous_match == false) { + /* new window */ + note_index = count; + length = 1; + } else { + length++; + } + previous_match = true; + if (length > max_window) { + max_index = note_index; + max_window = length; + } + } else { + previous_match = false; + } + phase_delay += 4; + count++; + } + + if (!max_window) { + dev_err(mmc_dev(host->mmc), "Unable to find match\n"); + err = -EIO; + goto tuning_error; + } + + ac12 = OMAP_HSMMC_READ(host->base, AC12); + if (!(ac12 & AC12_SCLK_SEL)) { + err = -EIO; + goto tuning_error; + } + + dll = OMAP_HSMMC_READ(host->base, DLL); + dll &= ~DLL_SWT; + OMAP_HSMMC_WRITE(host->base, DLL, dll); + count = 4 * (max_index + (max_window >> 1)); + if (omap_hsmmc_set_dll(host, count)) { + err = -EIO; + goto tuning_error; + } + host->tuning_fsrc = count; + host->tuning_uhsmc = (OMAP_HSMMC_READ(host->base, AC12) + & AC12_UHSMC_MASK); + host->tuning_opcode = opcode; + host->tuning_done = 1; + omap_hsmmc_reset_controller_fsm(host, SRD); + omap_hsmmc_reset_controller_fsm(host, SRC); + + return 0; + +tuning_error: + dev_err(mmc_dev(host->mmc), + "Tuning failed. Using fixed sampling clock\n"); + ac12 = OMAP_HSMMC_READ(host->base, AC12); + ac12 &= ~(AC12_UHSMC_MASK | AC12_SCLK_SEL); + OMAP_HSMMC_WRITE(host->base, AC12, ac12); + + dll = OMAP_HSMMC_READ(host->base, DLL); + dll &= ~(DLL_FORCE_VALUE | DLL_SWT); + OMAP_HSMMC_WRITE(host->base, DLL, dll); + + omap_hsmmc_reset_controller_fsm(host, SRD); + omap_hsmmc_reset_controller_fsm(host, SRC); + return err; +} + static struct mmc_host_ops omap_hsmmc_ops = { .enable = omap_hsmmc_enable_fclk, .disable = omap_hsmmc_disable_fclk, @@ -1855,6 +2161,7 @@ static struct mmc_host_ops omap_hsmmc_ops = { .get_ro = omap_hsmmc_get_ro, .init_card = omap_hsmmc_init_card, .enable_sdio_irq = omap_hsmmc_enable_sdio_irq, + .execute_tuning = omap_execute_tuning, }; #ifdef CONFIG_DEBUG_FS @@ -2107,6 +2414,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev) mmc->f_max = OMAP_MMC_MAX_CLOCK; spin_lock_init(&host->irq_lock); + init_completion(&host->buf_ready); host->fclk = devm_clk_get(&pdev->dev, "fck"); if (IS_ERR(host->fclk)) { @@ -2159,7 +2467,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev) mmc->pm_caps = mmc_slot(host).pm_caps; - reg = OMAP_HSMMC_READ(host->base, OMAP_HSMMC_CAPA2); + reg = OMAP_HSMMC_READ(host->base, CAPA2); if (reg & SDR50) mmc->caps |= MMC_CAP_UHS_DDR50; @@ -2172,6 +2480,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev) if (reg & DDR50) mmc->caps |= MMC_CAP_UHS_DDR50; + mmc->caps |= MMC_CAP_DRIVER_TYPE_A | MMC_CAP_DRIVER_TYPE_C | + MMC_CAP_DRIVER_TYPE_D; + omap_hsmmc_conf_bus_power(host); if (!pdev->dev.of_node) { @@ -2380,6 +2691,7 @@ static int omap_hsmmc_suspend(struct device *dev) OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); } + host->tuning_done = 0; /* do not wake up due to sdio irq */ if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && @@ -2434,6 +2746,9 @@ static int omap_hsmmc_runtime_suspend(struct device *dev) int ret = 0; host = platform_get_drvdata(to_platform_device(dev)); + if (host->tuning_done) + omap_hsmmc_restore_dll(host); + omap_hsmmc_context_save(host); dev_dbg(dev, "disabled\n"); @@ -2480,6 +2795,10 @@ static int omap_hsmmc_runtime_resume(struct device *dev) host = platform_get_drvdata(to_platform_device(dev)); omap_hsmmc_context_restore(host); + + if (host->tuning_done) + omap_hsmmc_restore_dll(host); + dev_dbg(dev, "enabled\n"); spin_lock_irqsave(&host->irq_lock, flags); -- 1.7.9.5
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com> To: chris@printf.net, ulf.hansson@linaro.org, tony@atomide.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mmc@vger.kernel.org, linux-omap@vger.kernel.org, afenkart@gmail.com, nsekhar@ti.com, kishon@ti.com Subject: [RFC PATCH 2/3] mmc: omap_hsmmc: add tuning support Date: Thu, 13 Nov 2014 20:24:17 +0530 [thread overview] Message-ID: <1415890458-20436-3-git-send-email-kishon@ti.com> (raw) In-Reply-To: <1415890458-20436-1-git-send-email-kishon@ti.com> From: Balaji T K <balajitk@ti.com> MMC tuning procedure is required to support SD card UHS1-SDR104 mode and EMMC HS200 mode. The tuning function omap_execute_tuning() will only be called by the MMC/SD core if the corresponding speed modes are supported by the OMAP silicon which is set in the mmc host "caps" field. Signed-off-by: Viswanath Puttagunta <vishp@ti.com> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> [ kishon@ti.com : Set the functional clock to 192MHz if the contoller supports HS200 ] Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/mmc/host/omap_hsmmc.c | 325 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 322 insertions(+), 3 deletions(-) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 2e42ed3..675bd31d 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -22,6 +22,7 @@ #include <linux/dmaengine.h> #include <linux/seq_file.h> #include <linux/sizes.h> +#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/dma-mapping.h> @@ -47,6 +48,7 @@ /* OMAP HSMMC Host Controller Registers */ #define OMAP_HSMMC_SYSSTATUS 0x0014 #define OMAP_HSMMC_CON 0x002C +#define OMAP_HSMMC_DLL 0x0034 #define OMAP_HSMMC_SDMASA 0x0100 #define OMAP_HSMMC_BLK 0x0104 #define OMAP_HSMMC_ARG 0x0108 @@ -100,6 +102,7 @@ #define CLKEXTFREE (1 << 16) #define CTPL (1 << 11) #define DW8 (1 << 5) +#define BRR (1 << 5) #define OD 0x1 #define STAT_CLEAR 0xFFFFFFFF #define INIT_STREAM_CMD 0x00000000 @@ -129,6 +132,20 @@ #define CERR_EN (1 << 28) #define BADA_EN (1 << 29) +#define V1V8_SIGEN (1 << 19) +#define AC12_SCLK_SEL (1 << 23) +#define AC12_UHSMC_MASK (7 << 16) +#define AC12_UHSMC_SDR50 (2 << 16) +#define AC12_UHSMC_SDR104 (3 << 16) +#define DLL_LOCK (1 << 0) +#define DLL_CALIB (1 << 1) +#define DLL_UNLOCK_STICKY (1 << 2) +#define DLL_SWT (1 << 20) +#define DLL_FORCE_SR_C_MASK (0x7F << 13) +#define DLL_FORCE_SR_C_SHIFT 13 +#define DLL_FORCE_VALUE (1 << 12) +#define DLL_RESET (1 << 31) + #define INT_EN_MASK (BADA_EN | CERR_EN | ACE_EN | DEB_EN | DCRC_EN |\ DTO_EN | CIE_EN | CEB_EN | CCRC_EN | CTO_EN | \ BRR_EN | BWR_EN | TC_EN | CC_EN) @@ -143,18 +160,23 @@ #define SDR50 (1 << 0) #define SDR104 (1 << 1) #define DDR50 (1 << 2) +#define CAPA2_TSDR50 (1 << 13) #define MMC_AUTOSUSPEND_DELAY 100 #define MMC_TIMEOUT_MS 20 /* 20 mSec */ #define MMC_TIMEOUT_US 20000 /* 20000 micro Sec */ #define OMAP_MMC_MIN_CLOCK 400000 #define OMAP_MMC_MAX_CLOCK 52000000 +#define MAX_PHASE_DELAY 0x7F #define DRIVER_NAME "omap_hsmmc" #define VDD_1V8 1800000 /* 180000 uV */ #define VDD_3V0 3000000 /* 300000 uV */ #define VDD_165_195 (ffs(MMC_VDD_165_195) - 1) +#define EMMC_HSDDR_SD_SDR25_MAX 52000000 +#define SD_SDR50_MAX_FREQ 104000000 + /* * One controller can have multiple slots, like on some omap boards using * omap.c controller driver. Luckily this is not currently done on any known @@ -198,6 +220,7 @@ struct omap_hsmmc_host { void __iomem *base; resource_size_t mapbase; spinlock_t irq_lock; /* Prevent races with irq handler */ + struct completion buf_ready; unsigned int dma_len; unsigned int dma_sg_idx; unsigned char bus_mode; @@ -224,6 +247,13 @@ struct omap_hsmmc_host { #define AUTO_CMD23 (1 << 0) /* Auto CMD23 support */ #define HSMMC_SDIO_IRQ_ENABLED (1 << 1) /* SDIO irq enabled */ #define HSMMC_WAKE_IRQ_ENABLED (1 << 2) + + u32 *tuning_data; + int tuning_size; + int tuning_done; + int tuning_fsrc; + u32 tuning_uhsmc; + u32 tuning_opcode; struct omap_hsmmc_next next_data; struct omap_mmc_platform_data *pdata; }; @@ -233,6 +263,48 @@ struct omap_mmc_of_data { u8 controller_flags; }; +static const u32 ref_tuning_4bits[] = { + 0x00FF0FFF, 0xCCC3CCFF, 0xFFCC3CC3, 0xEFFEFFFE, + 0xDDFFDFFF, 0xFBFFFBFF, 0xFF7FFFBF, 0xEFBDF777, + 0xF0FFF0FF, 0x3CCCFC0F, 0xCFCC33CC, 0xEEFFEFFF, + 0xFDFFFDFF, 0xFFBFFFDF, 0xFFF7FFBB, 0xDE7B7FF7 +}; + +static const u32 ref_tuning_8bits[] = { + 0xFF00FFFF, 0x0000FFFF, 0xCCCCFFFF, 0xCCCC33CC, + 0xCC3333CC, 0xFFFFCCCC, 0xFFFFEEFF, 0xFFEEEEFF, + 0xFFDDFFFF, 0xDDDDFFFF, 0xBBFFFFFF, 0xBBFFFFFF, + 0xFFFFFFBB, 0XFFFFFF77, 0x77FF7777, 0xFFEEDDBB, + 0x00FFFFFF, 0x00FFFFFF, 0xCCFFFF00, 0xCC33CCCC, + 0x3333CCCC, 0xFFCCCCCC, 0xFFEEFFFF, 0xEEEEFFFF, + 0xDDFFFFFF, 0xDDFFFFFF, 0xFFFFFFDD, 0XFFFFFFBB, + 0xFFFFBBBB, 0xFFFF77FF, 0xFF7777FF, 0xEEDDBB77 +}; + +static inline int omap_hsmmc_set_dll(struct omap_hsmmc_host *host, int count) +{ + int i; + u32 dll; + + dll = OMAP_HSMMC_READ(host->base, DLL); + dll &= ~(DLL_FORCE_SR_C_MASK); + dll &= ~DLL_CALIB; + dll |= (count << DLL_FORCE_SR_C_SHIFT); + OMAP_HSMMC_WRITE(host->base, DLL, dll); + dll |= DLL_FORCE_VALUE; + OMAP_HSMMC_WRITE(host->base, DLL, dll); + dll |= DLL_CALIB; + OMAP_HSMMC_WRITE(host->base, DLL, dll); + for (i = 0; i < 1000; i++) { + if (OMAP_HSMMC_READ(host->base, DLL) & DLL_CALIB) + break; + } + dll &= ~DLL_CALIB; + dll = OMAP_HSMMC_READ(host->base, DLL); + + return 0; +} + static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host); static int omap_hsmmc_card_detect(struct device *dev, int slot) @@ -531,7 +603,10 @@ static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host, u32 irq_mask = INT_EN_MASK; unsigned long flags; - if (host->use_dma) + if ((cmd->opcode == MMC_SEND_TUNING_BLOCK) || + (cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)) + irq_mask |= BRR_EN; + else if (host->use_dma) irq_mask &= ~(BRR_EN | BWR_EN); /* Disable timeout for erases */ @@ -578,6 +653,33 @@ static u16 calc_divisor(struct omap_hsmmc_host *host, struct mmc_ios *ios) return dsor; } +static inline int omap_hsmmc_restore_dll(struct omap_hsmmc_host *host) +{ + u32 ac12; + u32 dll; + + ac12 = OMAP_HSMMC_READ(host->base, AC12); + ac12 |= host->tuning_uhsmc; + OMAP_HSMMC_WRITE(host->base, AC12, ac12); + + dll = OMAP_HSMMC_READ(host->base, DLL); + dll |= DLL_FORCE_VALUE; + OMAP_HSMMC_WRITE(host->base, DLL, dll); + + if (omap_hsmmc_set_dll(host, host->tuning_fsrc)) + return -EIO; + return 0; +} + +static inline void omap_hsmmc_save_dll(struct omap_hsmmc_host *host) +{ + u32 ac12; + + ac12 = OMAP_HSMMC_READ(host->base, AC12); + ac12 &= ~AC12_UHSMC_MASK; + OMAP_HSMMC_WRITE(host->base, AC12, ac12); +} + static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host) { struct mmc_ios *ios = &host->mmc->ios; @@ -589,6 +691,9 @@ static void omap_hsmmc_set_clock(struct omap_hsmmc_host *host) omap_hsmmc_stop_clock(host); + if (host->mmc->caps2 & MMC_CAP2_HS200) + clk_set_rate(host->fclk, 192000000); + regval = OMAP_HSMMC_READ(host->base, SYSCTL); regval = regval & ~(CLKD_MASK | DTO_MASK); clkdiv = calc_divisor(host, ios); @@ -667,7 +772,6 @@ static void omap_hsmmc_set_bus_mode(struct omap_hsmmc_host *host) } #ifdef CONFIG_PM - /* * Restore the MMC host context, if it was lost as result of a * power state change. @@ -878,6 +982,12 @@ omap_hsmmc_start_command(struct omap_hsmmc_host *host, struct mmc_command *cmd, if (host->use_dma) cmdreg |= DMAE; + /* Tuning command is special. Data Present Select should be set */ + if ((cmd->opcode == MMC_SEND_TUNING_BLOCK) || + (cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200)) { + cmdreg = (cmd->opcode << 24) | (resptype << 16) | + (cmdtype << 22) | DP_SELECT | DDIR; + } host->req_in_progress = 1; OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg); @@ -965,6 +1075,9 @@ omap_hsmmc_cmd_done(struct omap_hsmmc_host *host, struct mmc_command *cmd) return; } + if (host->cmd->opcode == MMC_SEND_TUNING_BLOCK) + return; + host->cmd = NULL; if (cmd->flags & MMC_RSP_PRESENT) { @@ -1104,6 +1217,7 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status) struct mmc_data *data; int end_cmd = 0, end_trans = 0; int error = 0; + int i = 0; data = host->data; dev_vdbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); @@ -1139,6 +1253,15 @@ static void omap_hsmmc_do_irq(struct omap_hsmmc_host *host, int status) } OMAP_HSMMC_WRITE(host->base, STAT, status); + + if (status & BRR_EN) { + for (i = 0; i < host->tuning_size/4; i++) + host->tuning_data[i] = + OMAP_HSMMC_READ(host->base, DATA); + complete(&host->buf_ready); + return; + } + if (end_cmd || ((status & CC_EN) && host->cmd)) omap_hsmmc_cmd_done(host, host->cmd); if ((end_trans || (status & TC_EN)) && host->mrq) @@ -1844,6 +1967,189 @@ static int omap_hsmmc_multi_io_quirk(struct mmc_card *card, return blk_size; } +static int omap_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct omap_hsmmc_host *host; + struct mmc_ios *ios = &mmc->ios; + const u32 *tuning_ref; + int phase_delay = 0; + int err = 0; + int count = 0; + int length = 0; + int note_index = 0xFF; + int max_index = 0; + int max_window = 0; + bool previous_match = false; + bool current_match; + u32 ac12, capa2, dll = 0; + + host = mmc_priv(mmc); + switch (ios->bus_width) { + case MMC_BUS_WIDTH_8: + tuning_ref = ref_tuning_8bits; + host->tuning_size = sizeof(ref_tuning_8bits); + break; + case MMC_BUS_WIDTH_4: + tuning_ref = ref_tuning_4bits; + host->tuning_size = sizeof(ref_tuning_4bits); + break; + default: + return -EINVAL; + } + + host->tuning_data = kzalloc(host->tuning_size, GFP_KERNEL); + if (!host->tuning_data) + return -ENOMEM; + + host->tuning_done = 0; + /* clock tuning is not needed for upto 52MHz */ + if (ios->clock <= EMMC_HSDDR_SD_SDR25_MAX) + return 0; + + omap_hsmmc_stop_clock(host); + + ac12 = OMAP_HSMMC_READ(host->base, AC12); + capa2 = OMAP_HSMMC_READ(host->base, CAPA2); + + ac12 &= ~AC12_UHSMC_MASK; + OMAP_HSMMC_WRITE(host->base, AC12, ac12); + + /* + * Host Controller needs tuning only in case of SDR104 mode + * and for SDR50 mode when Use Tuning for SDR50 is set in + * Capabilities register. + */ + if (ios->clock <= SD_SDR50_MAX_FREQ) { + if (!(capa2 & CAPA2_TSDR50)) + return 0; + ac12 |= AC12_UHSMC_SDR50; + } else { + ac12 |= AC12_UHSMC_SDR104; + } + + ac12 |= AC12_UHSMC_SDR104; + ac12 |= V1V8_SIGEN; + + /* Enable SDR50/SDR104 mode */ + OMAP_HSMMC_WRITE(host->base, AC12, ac12); + omap_hsmmc_start_clock(host); + + /* Start software tuning Procedure */ + dll |= DLL_SWT; + OMAP_HSMMC_WRITE(host->base, DLL, dll); + + while (phase_delay < MAX_PHASE_DELAY) { + struct mmc_command cmd = {0}; + struct mmc_request mrq = {0}; + + if (phase_delay > MAX_PHASE_DELAY) + break; + + omap_hsmmc_set_dll(host, phase_delay); + + cmd.opcode = opcode; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; + cmd.retries = 0; + cmd.data = NULL; + cmd.error = 0; + + mrq.cmd = &cmd; + host->mrq = &mrq; + + OMAP_HSMMC_WRITE(host->base, BLK, host->tuning_size); + set_data_timeout(host, 50000000, 0); + omap_hsmmc_start_command(host, &cmd, NULL); + + host->cmd = NULL; + host->mrq = NULL; + + /* Wait for Buffer Read Ready interrupt */ + err = wait_for_completion_timeout(&host->buf_ready, + msecs_to_jiffies(5000)); + omap_hsmmc_disable_irq(host); + host->req_in_progress = 0; + + if (err == 0) { + dev_err(mmc_dev(host->mmc), + "Tuning BRR timeout. phase_delay=%x", + phase_delay); + err = -ETIMEDOUT; + goto tuning_error; + } + + current_match = true; + if (memcmp(host->tuning_data, tuning_ref, host->tuning_size)) + current_match = false; + else + current_match = true; + + if (current_match == true) { + if (previous_match == false) { + /* new window */ + note_index = count; + length = 1; + } else { + length++; + } + previous_match = true; + if (length > max_window) { + max_index = note_index; + max_window = length; + } + } else { + previous_match = false; + } + phase_delay += 4; + count++; + } + + if (!max_window) { + dev_err(mmc_dev(host->mmc), "Unable to find match\n"); + err = -EIO; + goto tuning_error; + } + + ac12 = OMAP_HSMMC_READ(host->base, AC12); + if (!(ac12 & AC12_SCLK_SEL)) { + err = -EIO; + goto tuning_error; + } + + dll = OMAP_HSMMC_READ(host->base, DLL); + dll &= ~DLL_SWT; + OMAP_HSMMC_WRITE(host->base, DLL, dll); + count = 4 * (max_index + (max_window >> 1)); + if (omap_hsmmc_set_dll(host, count)) { + err = -EIO; + goto tuning_error; + } + host->tuning_fsrc = count; + host->tuning_uhsmc = (OMAP_HSMMC_READ(host->base, AC12) + & AC12_UHSMC_MASK); + host->tuning_opcode = opcode; + host->tuning_done = 1; + omap_hsmmc_reset_controller_fsm(host, SRD); + omap_hsmmc_reset_controller_fsm(host, SRC); + + return 0; + +tuning_error: + dev_err(mmc_dev(host->mmc), + "Tuning failed. Using fixed sampling clock\n"); + ac12 = OMAP_HSMMC_READ(host->base, AC12); + ac12 &= ~(AC12_UHSMC_MASK | AC12_SCLK_SEL); + OMAP_HSMMC_WRITE(host->base, AC12, ac12); + + dll = OMAP_HSMMC_READ(host->base, DLL); + dll &= ~(DLL_FORCE_VALUE | DLL_SWT); + OMAP_HSMMC_WRITE(host->base, DLL, dll); + + omap_hsmmc_reset_controller_fsm(host, SRD); + omap_hsmmc_reset_controller_fsm(host, SRC); + return err; +} + static struct mmc_host_ops omap_hsmmc_ops = { .enable = omap_hsmmc_enable_fclk, .disable = omap_hsmmc_disable_fclk, @@ -1855,6 +2161,7 @@ static struct mmc_host_ops omap_hsmmc_ops = { .get_ro = omap_hsmmc_get_ro, .init_card = omap_hsmmc_init_card, .enable_sdio_irq = omap_hsmmc_enable_sdio_irq, + .execute_tuning = omap_execute_tuning, }; #ifdef CONFIG_DEBUG_FS @@ -2107,6 +2414,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev) mmc->f_max = OMAP_MMC_MAX_CLOCK; spin_lock_init(&host->irq_lock); + init_completion(&host->buf_ready); host->fclk = devm_clk_get(&pdev->dev, "fck"); if (IS_ERR(host->fclk)) { @@ -2159,7 +2467,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev) mmc->pm_caps = mmc_slot(host).pm_caps; - reg = OMAP_HSMMC_READ(host->base, OMAP_HSMMC_CAPA2); + reg = OMAP_HSMMC_READ(host->base, CAPA2); if (reg & SDR50) mmc->caps |= MMC_CAP_UHS_DDR50; @@ -2172,6 +2480,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev) if (reg & DDR50) mmc->caps |= MMC_CAP_UHS_DDR50; + mmc->caps |= MMC_CAP_DRIVER_TYPE_A | MMC_CAP_DRIVER_TYPE_C | + MMC_CAP_DRIVER_TYPE_D; + omap_hsmmc_conf_bus_power(host); if (!pdev->dev.of_node) { @@ -2380,6 +2691,7 @@ static int omap_hsmmc_suspend(struct device *dev) OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); } + host->tuning_done = 0; /* do not wake up due to sdio irq */ if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && @@ -2434,6 +2746,9 @@ static int omap_hsmmc_runtime_suspend(struct device *dev) int ret = 0; host = platform_get_drvdata(to_platform_device(dev)); + if (host->tuning_done) + omap_hsmmc_restore_dll(host); + omap_hsmmc_context_save(host); dev_dbg(dev, "disabled\n"); @@ -2480,6 +2795,10 @@ static int omap_hsmmc_runtime_resume(struct device *dev) host = platform_get_drvdata(to_platform_device(dev)); omap_hsmmc_context_restore(host); + + if (host->tuning_done) + omap_hsmmc_restore_dll(host); + dev_dbg(dev, "enabled\n"); spin_lock_irqsave(&host->irq_lock, flags); -- 1.7.9.5
next prev parent reply other threads:[~2014-11-13 14:55 UTC|newest] Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-11-13 14:54 [RFC PATCH 0/3] DRA72: MMC HS200 support Kishon Vijay Abraham I 2014-11-13 14:54 ` Kishon Vijay Abraham I 2014-11-13 14:54 ` [RFC PATCH 1/3] mmc: omap_hsmmc: set host capabilities by reading MMCHS_CAPA2 register Kishon Vijay Abraham I 2014-11-13 14:54 ` Kishon Vijay Abraham I 2014-11-13 14:54 ` Kishon Vijay Abraham I [this message] 2014-11-13 14:54 ` [RFC PATCH 2/3] mmc: omap_hsmmc: add tuning support Kishon Vijay Abraham I 2014-11-13 14:54 ` [RFC PATCH 3/3] ARM: dts: dra72-evm: Set the max-frequency to 192MHz Kishon Vijay Abraham I 2014-11-13 14:54 ` Kishon Vijay Abraham I 2014-11-13 14:56 ` [RFC PATCH 0/3] DRA72: MMC HS200 support Kishon Vijay Abraham I 2014-11-13 14:56 ` Kishon Vijay Abraham I -- strict thread matches above, loose matches on Subject: below -- 2014-11-13 12:56 Kishon Vijay Abraham I 2014-11-13 12:56 ` [RFC PATCH 2/3] mmc: omap_hsmmc: add tuning support Kishon Vijay Abraham I 2014-11-13 12:56 ` Kishon Vijay Abraham I 2014-11-13 12:56 ` Kishon Vijay Abraham I 2014-11-14 9:06 ` Andreas Fenkart 2014-11-14 9:06 ` Andreas Fenkart 2014-11-14 9:06 ` Andreas Fenkart 2014-11-14 17:41 ` Felipe Balbi 2014-11-14 17:41 ` Felipe Balbi 2014-11-14 17:41 ` Felipe Balbi 2014-11-14 18:07 ` Russell King - ARM Linux 2014-11-14 18:07 ` Russell King - ARM Linux
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1415890458-20436-3-git-send-email-kishon@ti.com \ --to=kishon@ti.com \ --cc=afenkart@gmail.com \ --cc=chris@printf.net \ --cc=devicetree@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=nsekhar@ti.com \ --cc=tony@atomide.com \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.