All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
To: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>,
	Amit Daniel Kachhap <amit.daniel@samsung.com>,
	Lukasz Majewski <l.majewski@samsung.com>,
	Kyungmin Park <kyungmin.park@samsung.com>,
	linux-samsung-soc@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com
Subject: [PATCH v2 06/33] thermal: exynos: remove needless therm_trip_[mode,mask]_shift abstractions
Date: Thu, 13 Nov 2014 16:01:01 +0100	[thread overview]
Message-ID: <1415890888-8881-7-git-send-email-b.zolnierkie@samsung.com> (raw)
In-Reply-To: <1415890888-8881-1-git-send-email-b.zolnierkie@samsung.com>

reg->therm_trip_mode_shift and reg->therm_trip_mode_mask are
used only in exynos_tmu_control() and accessed only if
pdata->noise_cancel_mode is non-zero.  pdata->noise_cancel
field is not defined on Exynos4210 (also therm_trip_mode_shift
and therm_trip_mode_mask entries are not even assigned in
exynos4210_tmu_registers but they are assigned to identical
values for all other SoC types) so the abstractions are not
needed and can be removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
---
 drivers/thermal/samsung/exynos_tmu.c      |  5 ++---
 drivers/thermal/samsung/exynos_tmu.h      |  4 ----
 drivers/thermal/samsung/exynos_tmu_data.c | 10 ----------
 3 files changed, 2 insertions(+), 17 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index c8d6cdde..fb38411 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -304,9 +304,8 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on)
 	con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
 
 	if (pdata->noise_cancel_mode) {
-		con &= ~(reg->therm_trip_mode_mask <<
-					reg->therm_trip_mode_shift);
-		con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
+		con &= ~(EXYNOS_TMU_TRIP_MODE_MASK << EXYNOS_TMU_TRIP_MODE_SHIFT);
+		con |= (pdata->noise_cancel_mode << EXYNOS_TMU_TRIP_MODE_SHIFT);
 	}
 
 	if (on) {
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 0fb10d1..88c16d7 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -77,8 +77,6 @@ enum soc_type {
  * bitfields. The register validity, offsets and bitfield values may vary
  * slightly across different exynos SOC's.
  * @tmu_ctrl: TMU main controller register.
- * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
- * @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register.
  * @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register.
  * @tmu_cur_temp: register containing the current temperature of the TMU.
  * @threshold_th0: Register containing first set of rising levels.
@@ -102,8 +100,6 @@ enum soc_type {
  */
 struct exynos_tmu_registers {
 	u32	tmu_ctrl;
-	u32	therm_trip_mode_shift;
-	u32	therm_trip_mode_mask;
 	u32	therm_trip_en_shift;
 
 	u32	tmu_cur_temp;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index 4ca1283..4a44eb7 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -83,8 +83,6 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
 #if defined(CONFIG_SOC_EXYNOS3250)
 static const struct exynos_tmu_registers exynos3250_tmu_registers = {
 	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
-	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
-	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
 	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
 	.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
 	.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -158,8 +156,6 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
 #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
 static const struct exynos_tmu_registers exynos4412_tmu_registers = {
 	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
-	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
-	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
 	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
 	.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
 	.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -246,8 +242,6 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = {
 #if defined(CONFIG_SOC_EXYNOS5260)
 static const struct exynos_tmu_registers exynos5260_tmu_registers = {
 	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
-	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
-	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
 	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
 	.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
 	.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -323,8 +317,6 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
 #if defined(CONFIG_SOC_EXYNOS5420)
 static const struct exynos_tmu_registers exynos5420_tmu_registers = {
 	.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
-	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
-	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
 	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
 	.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
 	.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -408,8 +400,6 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
 #if defined(CONFIG_SOC_EXYNOS5440)
 static const struct exynos_tmu_registers exynos5440_tmu_registers = {
 	.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
-	.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
-	.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
 	.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
 	.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
 	.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
-- 
1.8.2.3


  parent reply	other threads:[~2014-11-13 15:02 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-13 15:00 [PATCH v2 00/33] thermal: exynos: convert the driver to use per-SoC type operations Bartlomiej Zolnierkiewicz
2014-11-13 15:00 ` [PATCH v2 01/33] thermal: exynos: remove needless triminfo_data abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:00 ` [PATCH v2 02/33] thermal: exynos: remove needless tmu_status abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:00 ` [PATCH v2 03/33] thermal: exynos: remove needless threshold_temp abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:00 ` [PATCH v2 04/33] thermal: exynos: remove needless triminfo_ctrl abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 05/33] thermal: exynos: remove needless test_mux_addr_shift abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` Bartlomiej Zolnierkiewicz [this message]
2014-11-13 15:01 ` [PATCH v2 07/33] thermal: exynos: remove needless therm_trip_en_shift abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 08/33] thermal: exynos: remove needless emul_temp_shift abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 09/33] thermal: exynos: remove needless emul_time_shift abstraction Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 10/33] thermal: exynos: replace tmu_irqstatus check by Exynos5440 one Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 11/33] thermal: exynos: replace tmu_pmin " Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 12/33] thermal: exynos: simplify HW_TRIP level setting Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 13/33] thermal: exynos: replace threshold_falling check by Exynos SoC type one Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 14/33] thermal: exynos: remove TMU_SUPPORT_READY_STATUS flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 15/33] thermal: exynos: remove TMU_SUPPORT_TRIM_RELOAD flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 16/33] thermal: exynos: add sanitize_temp_error() helper Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 17/33] thermal: exynos: add get_th_reg() helper Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 18/33] thermal: exynos: add ->tmu_initialize method Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 19/33] thermal: exynos: add get_con_reg() helper Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 20/33] thermal: exynos: add ->tmu_control method Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 21/33] thermal: exynos: add ->tmu_read method Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 22/33] thermal: exynos: add get_emul_con_reg() helper Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 23/33] thermal: exynos: add ->tmu_set_emulation method Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 24/33] thermal: exynos: add ->tmu_clear_irqs method Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 25/33] thermal: exynos: remove TMU_SUPPORT_FALLING_TRIP flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 26/33] thermal: exynos: remove TMU_SUPPORT_EMUL_TIME flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 27/33] thermal: exynos: remove TMU_SUPPORT_EMULATION flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 28/33] thermal: exynos: remove TMU_SUPPORT_ADDRESS_MULTIPLE flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 29/33] thermal: exynos: remove TMU_SUPPORT_MULTI_INST flag Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 30/33] thermal: exynos: remove test_mux pdata field Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 31/33] thermal: exynos: remove SoC type ifdefs Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 32/33] thermal: exynos: remove __EXYNOS5420_TMU_DATA macro Bartlomiej Zolnierkiewicz
2014-11-13 15:01 ` [PATCH v2 33/33] thermal: exynos: remove exynos_tmu_data.h include Bartlomiej Zolnierkiewicz
2014-11-15 18:47 ` [PATCH v2 00/33] thermal: exynos: convert the driver to use per-SoC type operations Eduardo Valentin
2014-11-20 11:58 ` Lukasz Majewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1415890888-8881-7-git-send-email-b.zolnierkie@samsung.com \
    --to=b.zolnierkie@samsung.com \
    --cc=amit.daniel@samsung.com \
    --cc=edubezval@gmail.com \
    --cc=kyungmin.park@samsung.com \
    --cc=l.majewski@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=rui.zhang@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.