All of lore.kernel.org
 help / color / mirror / Atom feed
From: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
To: lee.jones@linaro.org, lgirdwood@gmail.com,
	myungjoo.ham@samsung.com, cw00.choi@samsung.com,
	linus.walleij@linaro.org, gnurou@gmail.com, broonie@kernel.org,
	tiwai@suse.de
Cc: perex@perex.cz, sameo@linux.intel.com, robh+dt@kernel.org,
	pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	ckeepax@opensource.wolfsonmicro.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	patches@opensource.wolfsonmicro.com, linux-gpio@vger.kernel.org,
	alsa-devel@alsa-project.org
Subject: [PATCH 1/6] mfd: arizona: add support for WM8280/WM8281
Date: Thu, 13 Nov 2014 17:50:41 +0000	[thread overview]
Message-ID: <1415901046-3391-2-git-send-email-rf@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1415901046-3391-1-git-send-email-rf@opensource.wolfsonmicro.com>

This adds support for the Wolfson Microelectronics
WM8280 and WM8281 codecs.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
---
 drivers/mfd/Kconfig              |    5 +++--
 drivers/mfd/arizona-core.c       |   14 ++++++++++++--
 drivers/mfd/arizona-i2c.c        |    2 ++
 drivers/mfd/arizona-irq.c        |    1 +
 drivers/mfd/arizona-spi.c        |    2 ++
 include/linux/mfd/arizona/core.h |    1 +
 6 files changed, 21 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index abef204..e00a90f 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1236,10 +1236,11 @@ config MFD_WM5102
 	  Support for Wolfson Microelectronics WM5102 low power audio SoC
 
 config MFD_WM5110
-	bool "Wolfson Microelectronics WM5110"
+	bool "Wolfson Microelectronics WM5110 and WM8280/WM8281"
 	depends on MFD_ARIZONA
 	help
-	  Support for Wolfson Microelectronics WM5110 low power audio SoC
+	  Support for Wolfson Microelectronics WM5110 and WM8280/WM8281
+	  low power audio SoC
 
 config MFD_WM8997
 	bool "Wolfson Microelectronics WM8997"
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index bce7c07..6e6b732 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -567,6 +567,7 @@ static int arizona_of_get_core_pdata(struct arizona *arizona)
 const struct of_device_id arizona_of_match[] = {
 	{ .compatible = "wlf,wm5102", .data = (void *)WM5102 },
 	{ .compatible = "wlf,wm5110", .data = (void *)WM5110 },
+	{ .compatible = "wlf,wm8280", .data = (void *)WM8280 },
 	{ .compatible = "wlf,wm8997", .data = (void *)WM8997 },
 	{},
 };
@@ -671,6 +672,7 @@ int arizona_dev_init(struct arizona *arizona)
 	switch (arizona->type) {
 	case WM5102:
 	case WM5110:
+	case WM8280:
 	case WM8997:
 		for (i = 0; i < ARRAY_SIZE(wm5102_core_supplies); i++)
 			arizona->core_supplies[i].supply
@@ -834,11 +836,18 @@ int arizona_dev_init(struct arizona *arizona)
 #endif
 #ifdef CONFIG_MFD_WM5110
 	case 0x5110:
-		type_name = "WM5110";
-		if (arizona->type != WM5110) {
+		switch (arizona->type) {
+		case WM5110:
+			type_name = "WM5110";
+			break;
+		case WM8280:
+			type_name = "WM8280";
+			break;
+		default:
 			dev_err(arizona->dev, "WM5110 registered as %d\n",
 				arizona->type);
 			arizona->type = WM5110;
+			break;
 		}
 		apply_patch = wm5110_patch;
 		break;
@@ -1010,6 +1019,7 @@ int arizona_dev_init(struct arizona *arizona)
 				      ARRAY_SIZE(wm5102_devs), NULL, 0, NULL);
 		break;
 	case WM5110:
+	case WM8280:
 		ret = mfd_add_devices(arizona->dev, -1, wm5110_devs,
 				      ARRAY_SIZE(wm5110_devs), NULL, 0, NULL);
 		break;
diff --git a/drivers/mfd/arizona-i2c.c b/drivers/mfd/arizona-i2c.c
index 9d4156f..ff782a5 100644
--- a/drivers/mfd/arizona-i2c.c
+++ b/drivers/mfd/arizona-i2c.c
@@ -44,6 +44,7 @@ static int arizona_i2c_probe(struct i2c_client *i2c,
 #endif
 #ifdef CONFIG_MFD_WM5110
 	case WM5110:
+	case WM8280:
 		regmap_config = &wm5110_i2c_regmap;
 		break;
 #endif
@@ -87,6 +88,7 @@ static int arizona_i2c_remove(struct i2c_client *i2c)
 static const struct i2c_device_id arizona_i2c_id[] = {
 	{ "wm5102", WM5102 },
 	{ "wm5110", WM5110 },
+	{ "wm8280", WM8280 },
 	{ "wm8997", WM8997 },
 	{ }
 };
diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c
index 3a3fe7c..d063b94 100644
--- a/drivers/mfd/arizona-irq.c
+++ b/drivers/mfd/arizona-irq.c
@@ -211,6 +211,7 @@ int arizona_irq_init(struct arizona *arizona)
 #endif
 #ifdef CONFIG_MFD_WM5110
 	case WM5110:
+	case WM8280:
 		aod = &wm5110_aod;
 
 		switch (arizona->rev) {
diff --git a/drivers/mfd/arizona-spi.c b/drivers/mfd/arizona-spi.c
index 5145d78..721b93f 100644
--- a/drivers/mfd/arizona-spi.c
+++ b/drivers/mfd/arizona-spi.c
@@ -44,6 +44,7 @@ static int arizona_spi_probe(struct spi_device *spi)
 #endif
 #ifdef CONFIG_MFD_WM5110
 	case WM5110:
+	case WM8280:
 		regmap_config = &wm5110_spi_regmap;
 		break;
 #endif
@@ -82,6 +83,7 @@ static int arizona_spi_remove(struct spi_device *spi)
 static const struct spi_device_id arizona_spi_ids[] = {
 	{ "wm5102", WM5102 },
 	{ "wm5110", WM5110 },
+	{ "wm8280", WM8280 },
 	{ },
 };
 MODULE_DEVICE_TABLE(spi, arizona_spi_ids);
diff --git a/include/linux/mfd/arizona/core.h b/include/linux/mfd/arizona/core.h
index 910e3aa..f970105 100644
--- a/include/linux/mfd/arizona/core.h
+++ b/include/linux/mfd/arizona/core.h
@@ -24,6 +24,7 @@ enum arizona_type {
 	WM5102 = 1,
 	WM5110 = 2,
 	WM8997 = 3,
+	WM8280 = 4,
 };
 
 #define ARIZONA_IRQ_GP1                    0
-- 
1.7.2.5

  reply	other threads:[~2014-11-13 17:50 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-13 17:50 [PATCH 0/6] Add support for the WM8280 and WM8281 codecs Richard Fitzgerald
2014-11-13 17:50 ` Richard Fitzgerald [this message]
2014-11-18 15:41   ` [PATCH 1/6] mfd: arizona: add support for WM8280/WM8281 Lee Jones
2014-11-18 15:56     ` Richard Fitzgerald
2014-11-18 15:56       ` Richard Fitzgerald
2014-11-13 17:50 ` [PATCH 2/6] Documentation: devicetree: arizona: Add bindings for WM8280 Richard Fitzgerald
2014-11-13 17:50   ` Richard Fitzgerald
     [not found]   ` <1415901046-3391-3-git-send-email-rf-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2014-11-13 18:06     ` Mark Brown
2014-11-13 18:06       ` Mark Brown
2014-11-14 10:04   ` [PATCH 2/6 V2] " Richard Fitzgerald
2014-11-13 17:50 ` [PATCH 3/6] regulator: arizona-micsupp: Add support for WM8280/WM8281 Richard Fitzgerald
2014-11-24 14:18   ` [alsa-devel] " Richard Fitzgerald
2014-11-24 15:05     ` Mark Brown
2014-11-13 17:50 ` [PATCH 4/6] gpio: arizona: " Richard Fitzgerald
2014-11-14 10:17   ` Linus Walleij
2014-11-13 17:50 ` [PATCH 5/6] extcon: " Richard Fitzgerald
2014-11-13 23:34   ` Chanwoo Choi
2014-11-13 17:50 ` [PATCH 6/6] ASoC: " Richard Fitzgerald
2014-11-18 14:29   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1415901046-3391-2-git-send-email-rf@opensource.wolfsonmicro.com \
    --to=rf@opensource.wolfsonmicro.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.wolfsonmicro.com \
    --cc=cw00.choi@samsung.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=gnurou@gmail.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=myungjoo.ham@samsung.com \
    --cc=patches@opensource.wolfsonmicro.com \
    --cc=pawel.moll@arm.com \
    --cc=perex@perex.cz \
    --cc=robh+dt@kernel.org \
    --cc=sameo@linux.intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.