From: Chris Zhong <zyw@rock-chips.com> To: heiko@sntech.de, dianders@chromium.org Cc: mturquette@linaro.org, Ian Campbell <ijc+devicetree@hellion.org.uk>, Russell King <linux@arm.linux.org.uk>, Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>, Mark Rutland <mark.rutland@arm.com>, Linus Walleij <linus.walleij@linaro.org>, khilman@kernel.org, linux-rockchip@lists.infradead.org, Chris Zhong <zyw@rock-chips.com>, Tony Xie <xxx@rock-chips.com>, Kumar Gala <galak@codeaurora.org>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v8 3/4] ARM: dts: add RK3288 suspend support Date: Sat, 15 Nov 2014 19:45:09 +0800 [thread overview] Message-ID: <1416051910-16730-4-git-send-email-zyw@rock-chips.com> (raw) In-Reply-To: <1416051910-16730-1-git-send-email-zyw@rock-chips.com> add pmu sram node for suspend, add global_pwroff pinctrl. The pmu sram is used to store the resume code. global_pwroff is held low level at work, it would be pull to high when entering suspend. reference this in the board DTS file since some boards need it. ddrio_pwroff is power switch of ddr_controller, if you want to cut off power rail of ddr_controller during suspend, please reference it. ddr0_retention/ddr1_retention are the retention mode switches, if you want to use the retention mode during suspend, please reference them. Signed-off-by: Tony Xie <xxx@rock-chips.com> Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> --- Changes in v8: - add ddr pinctrl for suspend Changes in v7: None Changes in v6: - change pmu_intmem@ff720000 to sram@ff720000 Changes in v5: - change size to 4k Changes in v4: None Changes in v3: None Changes in v2: - put "rockchip,rk3288-pmu-sram" to first arch/arm/boot/dts/rk3288.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index df30437..60bccff 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -482,6 +482,11 @@ }; }; + sram@ff720000 { + compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; + reg = <0xff720000 0x1000>; + }; + pmu: power-management@ff730000 { compatible = "rockchip,rk3288-pmu", "syscon"; reg = <0xff730000 0x100>; @@ -687,6 +692,24 @@ bias-disable; }; + sleep { + global_pwroff: global-pwroff { + rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>; + }; + + ddrio_pwroff: ddrio-pwroff { + rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + ddr0_retention: ddr0-retention { + rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>; + }; + + ddr1_retention: ddr1-retention { + rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: zyw@rock-chips.com (Chris Zhong) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v8 3/4] ARM: dts: add RK3288 suspend support Date: Sat, 15 Nov 2014 19:45:09 +0800 [thread overview] Message-ID: <1416051910-16730-4-git-send-email-zyw@rock-chips.com> (raw) In-Reply-To: <1416051910-16730-1-git-send-email-zyw@rock-chips.com> add pmu sram node for suspend, add global_pwroff pinctrl. The pmu sram is used to store the resume code. global_pwroff is held low level at work, it would be pull to high when entering suspend. reference this in the board DTS file since some boards need it. ddrio_pwroff is power switch of ddr_controller, if you want to cut off power rail of ddr_controller during suspend, please reference it. ddr0_retention/ddr1_retention are the retention mode switches, if you want to use the retention mode during suspend, please reference them. Signed-off-by: Tony Xie <xxx@rock-chips.com> Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Tested-by: Doug Anderson <dianders@chromium.org> --- Changes in v8: - add ddr pinctrl for suspend Changes in v7: None Changes in v6: - change pmu_intmem at ff720000 to sram at ff720000 Changes in v5: - change size to 4k Changes in v4: None Changes in v3: None Changes in v2: - put "rockchip,rk3288-pmu-sram" to first arch/arm/boot/dts/rk3288.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index df30437..60bccff 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -482,6 +482,11 @@ }; }; + sram at ff720000 { + compatible = "rockchip,rk3288-pmu-sram", "mmio-sram"; + reg = <0xff720000 0x1000>; + }; + pmu: power-management at ff730000 { compatible = "rockchip,rk3288-pmu", "syscon"; reg = <0xff730000 0x100>; @@ -687,6 +692,24 @@ bias-disable; }; + sleep { + global_pwroff: global-pwroff { + rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>; + }; + + ddrio_pwroff: ddrio-pwroff { + rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>; + }; + + ddr0_retention: ddr0-retention { + rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>; + }; + + ddr1_retention: ddr1-retention { + rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + i2c0 { i2c0_xfer: i2c0-xfer { rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, -- 1.9.1
next prev parent reply other threads:[~2014-11-15 11:45 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-11-15 11:45 [PATCH v8 0/4] This is the 1st version of suspend for RK3288 Chris Zhong 2014-11-15 11:45 ` Chris Zhong 2014-11-15 11:45 ` Chris Zhong 2014-11-15 11:45 ` [PATCH v8 1/4] ARM: rockchip: add suspend and resume " Chris Zhong 2014-11-15 11:45 ` Chris Zhong 2014-11-24 23:20 ` Heiko Stübner 2014-11-24 23:20 ` Heiko Stübner 2014-11-25 3:59 ` Chris Zhong 2014-11-25 3:59 ` Chris Zhong 2014-11-15 11:45 ` [PATCH v8 2/4] ARM: rockchip: Add pmu-sram binding Chris Zhong 2014-11-15 11:45 ` Chris Zhong [this message] 2014-11-15 11:45 ` [PATCH v8 3/4] ARM: dts: add RK3288 suspend support Chris Zhong 2014-11-15 11:45 ` [PATCH v8 4/4] ARM: dts: add suspend voltage setting for RK808 Chris Zhong 2014-11-15 11:45 ` Chris Zhong 2014-11-24 23:01 ` Heiko Stübner 2014-11-24 23:01 ` Heiko Stübner 2014-11-24 22:50 ` [PATCH v8 0/4] This is the 1st version of suspend for RK3288 Heiko Stübner 2014-11-24 22:50 ` Heiko Stübner 2014-11-24 22:50 ` Heiko Stübner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1416051910-16730-4-git-send-email-zyw@rock-chips.com \ --to=zyw@rock-chips.com \ --cc=devicetree@vger.kernel.org \ --cc=dianders@chromium.org \ --cc=galak@codeaurora.org \ --cc=heiko@sntech.de \ --cc=ijc+devicetree@hellion.org.uk \ --cc=khilman@kernel.org \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=linux@arm.linux.org.uk \ --cc=mark.rutland@arm.com \ --cc=mturquette@linaro.org \ --cc=pawel.moll@arm.com \ --cc=robh+dt@kernel.org \ --cc=xxx@rock-chips.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.