From: Jianqun Xu <jay.xu@rock-chips.com> To: heiko@sntech.de, lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz, tiwai@suse.de, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, huangtao@rock-chips.com Cc: Jianqun Xu <jay.xu@rock-chips.com> Subject: [PATCH 1/2] ASoC: rockchip-i2s: dt: add i2s_clkout to list of clocks Date: Wed, 19 Nov 2014 11:06:04 +0800 [thread overview] Message-ID: <1416366365-4632-2-git-send-email-jay.xu@rock-chips.com> (raw) In-Reply-To: <1416366365-4632-1-git-send-email-jay.xu@rock-chips.com> Add i2s_clkout property, which enables output clock to chip outside, this is generally for audio codec outside. Also add it to example. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> --- Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 9b82c20..3d23b15 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -21,6 +21,7 @@ Required properties: - clock-names: should contain followings: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller + - "i2s_clko" : clock for codec outside of chip Example for rk3288 I2S controller: @@ -32,6 +33,6 @@ i2s@ff890000 { #size-cells = <0>; dmas = <&pdma1 0>, <&pdma1 1>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + clock-names = "i2s_hclk", "i2s_clk", "i2s_clko"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_CLKOUT>; }; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: jay.xu@rock-chips.com (Jianqun Xu) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/2] ASoC: rockchip-i2s: dt: add i2s_clkout to list of clocks Date: Wed, 19 Nov 2014 11:06:04 +0800 [thread overview] Message-ID: <1416366365-4632-2-git-send-email-jay.xu@rock-chips.com> (raw) In-Reply-To: <1416366365-4632-1-git-send-email-jay.xu@rock-chips.com> Add i2s_clkout property, which enables output clock to chip outside, this is generally for audio codec outside. Also add it to example. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> --- Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 9b82c20..3d23b15 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -21,6 +21,7 @@ Required properties: - clock-names: should contain followings: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller + - "i2s_clko" : clock for codec outside of chip Example for rk3288 I2S controller: @@ -32,6 +33,6 @@ i2s at ff890000 { #size-cells = <0>; dmas = <&pdma1 0>, <&pdma1 1>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + clock-names = "i2s_hclk", "i2s_clk", "i2s_clko"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_CLKOUT>; }; -- 1.9.1
next prev parent reply other threads:[~2014-11-19 3:13 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-11-19 3:06 [PATCH 0/2] ASoC: rockchip: i2s: add support for grabbing output clock to codec Jianqun Xu 2014-11-19 3:06 ` Jianqun Xu 2014-11-19 3:06 ` Jianqun Xu [this message] 2014-11-19 3:06 ` [PATCH 1/2] ASoC: rockchip-i2s: dt: add i2s_clkout to list of clocks Jianqun Xu 2014-11-19 8:07 ` [PATCH v2 1/2] ASoC: rockchip-i2s: dt: add an optional property "i2s_clk_out" Jianqun Xu 2014-11-19 8:07 ` Jianqun Xu 2014-11-19 10:10 ` Mark Brown 2014-11-19 10:10 ` Mark Brown 2014-11-19 10:10 ` Mark Brown 2014-11-19 3:07 ` [PATCH 2/2] ASoC: rockchip: i2s: add support for grabbing output clock to codec Jianqun Xu 2014-11-19 3:07 ` Jianqun Xu 2014-11-19 3:07 ` Jianqun Xu 2014-11-19 3:57 ` Sonny Rao 2014-11-19 3:57 ` Sonny Rao 2014-11-19 6:41 ` Jianqun 2014-11-19 8:09 ` [PATCH v2 " Jianqun Xu 2014-11-19 8:09 ` Jianqun Xu 2014-11-19 8:09 ` Jianqun Xu 2014-11-19 10:17 ` Heiko Stübner 2014-11-19 10:17 ` Heiko Stübner 2014-11-19 10:27 ` Kever Yang 2014-11-19 10:27 ` Kever Yang
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1416366365-4632-2-git-send-email-jay.xu@rock-chips.com \ --to=jay.xu@rock-chips.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=heiko@sntech.de \ --cc=huangtao@rock-chips.com \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=perex@perex.cz \ --cc=tiwai@suse.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.