All of lore.kernel.org
 help / color / mirror / Atom feed
From: wens@csie.org (Chen-Yu Tsai)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH resend v4 1/3] clk: sunxi: unify sun6i AHB1 clock with proper PLL6 pre-divider
Date: Wed, 26 Nov 2014 15:16:52 +0800	[thread overview]
Message-ID: <1416986214-4861-2-git-send-email-wens@csie.org> (raw)
In-Reply-To: <1416986214-4861-1-git-send-email-wens@csie.org>

This patch unifies the sun6i AHB1 clock, originally supported
with separate mux and divider clks. It also adds support for
the pre-divider on the PLL6 input, thus allowing the clock to
be muxed to PLL6 with proper clock rate calculation.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 Documentation/devicetree/bindings/clock/sunxi.txt |   2 +-
 drivers/clk/sunxi/clk-sunxi.c                     | 208 ++++++++++++++++++++++
 2 files changed, 209 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 67b2b99..9dc4f55 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -26,7 +26,7 @@ Required properties:
 	"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
 	"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
 	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
-	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
+	"allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
 	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
 	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
 	"allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
index 5702025..337593c 100644
--- a/drivers/clk/sunxi/clk-sunxi.c
+++ b/drivers/clk/sunxi/clk-sunxi.c
@@ -20,11 +20,219 @@
 #include <linux/of_address.h>
 #include <linux/reset-controller.h>
 #include <linux/spinlock.h>
+#include <linux/log2.h>
 
 #include "clk-factors.h"
 
 static DEFINE_SPINLOCK(clk_lock);
 
+/**
+ * sun6i_a31_ahb1_clk_setup() - Setup function for a31 ahb1 composite clk
+ */
+
+#define SUN6I_AHB1_MAX_PARENTS		4
+#define SUN6I_AHB1_MUX_PARENT_PLL6	3
+#define SUN6I_AHB1_MUX_SHIFT		12
+/* un-shifted mask is what mux_clk expects */
+#define SUN6I_AHB1_MUX_MASK		0x3
+#define SUN6I_AHB1_MUX_GET_PARENT(reg)	((reg >> SUN6I_AHB1_MUX_SHIFT) & \
+					 SUN6I_AHB1_MUX_MASK)
+
+#define SUN6I_AHB1_DIV_SHIFT		4
+#define SUN6I_AHB1_DIV_MASK		(0x3 << SUN6I_AHB1_DIV_SHIFT)
+#define SUN6I_AHB1_DIV_GET(reg)		((reg & SUN6I_AHB1_DIV_MASK) >> \
+						SUN6I_AHB1_DIV_SHIFT)
+#define SUN6I_AHB1_DIV_SET(reg, div)	((reg & ~SUN6I_AHB1_DIV_MASK) | \
+						(div << SUN6I_AHB1_DIV_SHIFT))
+#define SUN6I_AHB1_PLL6_DIV_SHIFT	6
+#define SUN6I_AHB1_PLL6_DIV_MASK	(0x3 << SUN6I_AHB1_PLL6_DIV_SHIFT)
+#define SUN6I_AHB1_PLL6_DIV_GET(reg)	((reg & SUN6I_AHB1_PLL6_DIV_MASK) >> \
+						SUN6I_AHB1_PLL6_DIV_SHIFT)
+#define SUN6I_AHB1_PLL6_DIV_SET(reg, div) ((reg & ~SUN6I_AHB1_PLL6_DIV_MASK) | \
+						(div << SUN6I_AHB1_PLL6_DIV_SHIFT))
+
+struct sun6i_ahb1_clk {
+	struct clk_hw hw;
+	void __iomem *reg;
+};
+
+#define to_sun6i_ahb1_clk(_hw) container_of(_hw, struct sun6i_ahb1_clk, hw)
+
+static unsigned long sun6i_ahb1_clk_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct sun6i_ahb1_clk *ahb1 = to_sun6i_ahb1_clk(hw);
+	unsigned long rate;
+	u32 reg;
+
+	/* Fetch the register value */
+	reg = readl(ahb1->reg);
+
+	/* apply pre-divider first if parent is pll6 */
+	if (SUN6I_AHB1_MUX_GET_PARENT(reg) == SUN6I_AHB1_MUX_PARENT_PLL6)
+		parent_rate /= SUN6I_AHB1_PLL6_DIV_GET(reg) + 1;
+
+	/* clk divider */
+	rate = parent_rate >> SUN6I_AHB1_DIV_GET(reg);
+
+	return rate;
+}
+
+static long sun6i_ahb1_clk_round(unsigned long rate, u8 *divp, u8 *pre_divp,
+				 u8 parent, unsigned long parent_rate)
+{
+	u8 div, calcp, calcm = 1;
+
+	/*
+	 * clock can only divide, so we will never be able to achieve
+	 * frequencies higher than the parent frequency
+	 */
+	if (parent_rate && rate > parent_rate)
+		rate = parent_rate;
+
+	div = DIV_ROUND_UP(parent_rate, rate);
+
+	/* calculate pre-divider if parent is pll6 */
+	if (parent == SUN6I_AHB1_MUX_PARENT_PLL6) {
+		if (div < 4)
+			calcp = 0;
+		else if (div / 2 < 4)
+			calcp = 1;
+		else if (div / 4 < 4)
+			calcp = 2;
+		else
+			calcp = 3;
+
+		calcm = DIV_ROUND_UP(div, 1 << calcp);
+	} else {
+		calcp = __roundup_pow_of_two(div);
+		calcp = calcp > 3 ? 3 : calcp;
+	}
+
+	/* we were asked to pass back divider values */
+	if (divp) {
+		*divp = calcp;
+		*pre_divp = calcm - 1;
+	}
+
+	return (parent_rate / calcm) >> calcp;
+}
+
+static long sun6i_ahb1_clk_determine_rate(struct clk_hw *hw, unsigned long rate,
+					  unsigned long *best_parent_rate,
+					  struct clk **best_parent_clk)
+{
+	struct clk *clk = hw->clk, *parent, *best_parent = NULL;
+	int i, num_parents;
+	unsigned long parent_rate, best = 0, child_rate, best_child_rate = 0;
+
+	/* find the parent that can help provide the fastest rate <= rate */
+	num_parents = __clk_get_num_parents(clk);
+	for (i = 0; i < num_parents; i++) {
+		parent = clk_get_parent_by_index(clk, i);
+		if (!parent)
+			continue;
+		if (__clk_get_flags(clk) & CLK_SET_RATE_PARENT)
+			parent_rate = __clk_round_rate(parent, rate);
+		else
+			parent_rate = __clk_get_rate(parent);
+
+		child_rate = sun6i_ahb1_clk_round(rate, NULL, NULL, i,
+						  parent_rate);
+
+		if (child_rate <= rate && child_rate > best_child_rate) {
+			best_parent = parent;
+			best = parent_rate;
+			best_child_rate = child_rate;
+		}
+	}
+
+	if (best_parent)
+		*best_parent_clk = best_parent;
+	*best_parent_rate = best;
+
+	return best_child_rate;
+}
+
+static int sun6i_ahb1_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+				   unsigned long parent_rate)
+{
+	struct sun6i_ahb1_clk *ahb1 = to_sun6i_ahb1_clk(hw);
+	unsigned long flags;
+	u8 div, pre_div, parent;
+	u32 reg;
+
+	spin_lock_irqsave(&clk_lock, flags);
+
+	reg = readl(ahb1->reg);
+
+	/* need to know which parent is used to apply pre-divider */
+	parent = SUN6I_AHB1_MUX_GET_PARENT(reg);
+	sun6i_ahb1_clk_round(rate, &div, &pre_div, parent, parent_rate);
+
+	reg = SUN6I_AHB1_DIV_SET(reg, div);
+	reg = SUN6I_AHB1_PLL6_DIV_SET(reg, pre_div);
+	writel(reg, ahb1->reg);
+
+	spin_unlock_irqrestore(&clk_lock, flags);
+
+	return 0;
+}
+
+static const struct clk_ops sun6i_ahb1_clk_ops = {
+	.determine_rate	= sun6i_ahb1_clk_determine_rate,
+	.recalc_rate	= sun6i_ahb1_clk_recalc_rate,
+	.set_rate	= sun6i_ahb1_clk_set_rate,
+};
+
+static void __init sun6i_ahb1_clk_setup(struct device_node *node)
+{
+	struct clk *clk;
+	struct sun6i_ahb1_clk *ahb1;
+	struct clk_mux *mux;
+	const char *clk_name = node->name;
+	const char *parents[SUN6I_AHB1_MAX_PARENTS];
+	void __iomem *reg;
+	int i = 0;
+
+	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+
+	/* we have a mux, we will have >1 parents */
+	while (i < SUN6I_AHB1_MAX_PARENTS &&
+	       (parents[i] = of_clk_get_parent_name(node, i)) != NULL)
+		i++;
+
+	of_property_read_string(node, "clock-output-names", &clk_name);
+
+	ahb1 = kzalloc(sizeof(struct sun6i_ahb1_clk), GFP_KERNEL);
+	if (!ahb1)
+		return;
+
+	mux = kzalloc(sizeof(struct clk_mux), GFP_KERNEL);
+	if (!mux) {
+		kfree(ahb1);
+		return;
+	}
+
+	/* set up clock properties */
+	mux->reg = reg;
+	mux->shift = SUN6I_AHB1_MUX_SHIFT;
+	mux->mask = SUN6I_AHB1_MUX_MASK;
+	mux->lock = &clk_lock;
+	ahb1->reg = reg;
+
+	clk = clk_register_composite(NULL, clk_name, parents, i,
+				     &mux->hw, &clk_mux_ops,
+				     &ahb1->hw, &sun6i_ahb1_clk_ops,
+				     NULL, NULL, 0);
+
+	if (!IS_ERR(clk)) {
+		of_clk_add_provider(node, of_clk_src_simple_get, clk);
+		clk_register_clkdev(clk, clk_name, NULL);
+	}
+}
+CLK_OF_DECLARE(sun6i_a31_ahb1, "allwinner,sun6i-a31-ahb1-clk", sun6i_ahb1_clk_setup);
+
 /* Maximum number of parents our clocks have */
 #define SUNXI_MAX_PARENTS	5
 
-- 
2.1.3

  reply	other threads:[~2014-11-26  7:16 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-26  7:16 [PATCH resend v4 0/3] clk: sun6i: Unify AHB1 clock and fix rate calculation Chen-Yu Tsai
2014-11-26  7:16 ` Chen-Yu Tsai [this message]
2014-11-26  7:16 ` [PATCH resend v4 2/3] ARM: dts: sun6i: Unify ahb1 clock nodes Chen-Yu Tsai
2014-11-26  7:16 ` [PATCH resend v4 3/3] ARM: dts: sun8i: " Chen-Yu Tsai
2014-11-26 18:35 ` [PATCH resend v4 0/3] clk: sun6i: Unify AHB1 clock and fix rate calculation Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1416986214-4861-2-git-send-email-wens@csie.org \
    --to=wens@csie.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.