All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
To: dri-devel@lists.freedesktop.org
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Subject: [PATCH] drm: tda998x: Use drm_do_get_edid()
Date: Wed, 26 Nov 2014 21:04:15 +0200	[thread overview]
Message-ID: <1417028655-15933-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com> (raw)

Replace the internal EDID read implementation by a call to the new EDID
read core function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 drivers/gpu/drm/i2c/tda998x_drv.c | 86 ++++++++-------------------------------
 1 file changed, 18 insertions(+), 68 deletions(-)

This patch has been compile-tested only as I lack test hardware. It depends on
"[PATCH v4 6/9] drm: Decouple EDID parsing from I2C adapter" previously posted
to the dri-devel mailing list.

diff --git a/drivers/gpu/drm/i2c/tda998x_drv.c b/drivers/gpu/drm/i2c/tda998x_drv.c
index d4762799351d..a267a78a0d0a 100644
--- a/drivers/gpu/drm/i2c/tda998x_drv.c
+++ b/drivers/gpu/drm/i2c/tda998x_drv.c
@@ -1011,8 +1011,9 @@ tda998x_encoder_detect(struct tda998x_priv *priv)
 			connector_status_disconnected;
 }
 
-static int read_edid_block(struct tda998x_priv *priv, uint8_t *buf, int blk)
+static int read_edid_block(void *data, u8 *buf, unsigned int blk, size_t length)
 {
+	struct tda998x_priv *priv = data;
 	uint8_t offset, segptr;
 	int ret, i;
 
@@ -1056,8 +1057,8 @@ static int read_edid_block(struct tda998x_priv *priv, uint8_t *buf, int blk)
 		return -ETIMEDOUT;
 	}
 
-	ret = reg_read_range(priv, REG_EDID_DATA_0, buf, EDID_LENGTH);
-	if (ret != EDID_LENGTH) {
+	ret = reg_read_range(priv, REG_EDID_DATA_0, buf, length);
+	if (ret != length) {
 		dev_err(&priv->hdmi->dev, "failed to read edid block %d: %d\n",
 			blk, ret);
 		return ret;
@@ -1066,82 +1067,31 @@ static int read_edid_block(struct tda998x_priv *priv, uint8_t *buf, int blk)
 	return 0;
 }
 
-static uint8_t *do_get_edid(struct tda998x_priv *priv)
+static int
+tda998x_encoder_get_modes(struct tda998x_priv *priv,
+			  struct drm_connector *connector)
 {
-	int j, valid_extensions = 0;
-	uint8_t *block, *new;
-	bool print_bad_edid = drm_debug & DRM_UT_KMS;
-
-	if ((block = kmalloc(EDID_LENGTH, GFP_KERNEL)) == NULL)
-		return NULL;
+	struct edid *edid;
+	int n;
 
 	if (priv->rev == TDA19988)
 		reg_clear(priv, REG_TX4, TX4_PD_RAM);
 
-	/* base block fetch */
-	if (read_edid_block(priv, block, 0))
-		goto fail;
-
-	if (!drm_edid_block_valid(block, 0, print_bad_edid))
-		goto fail;
-
-	/* if there's no extensions, we're done */
-	if (block[0x7e] == 0)
-		goto done;
-
-	new = krealloc(block, (block[0x7e] + 1) * EDID_LENGTH, GFP_KERNEL);
-	if (!new)
-		goto fail;
-	block = new;
-
-	for (j = 1; j <= block[0x7e]; j++) {
-		uint8_t *ext_block = block + (valid_extensions + 1) * EDID_LENGTH;
-		if (read_edid_block(priv, ext_block, j))
-			goto fail;
-
-		if (!drm_edid_block_valid(ext_block, j, print_bad_edid))
-			goto fail;
+	edid = drm_do_get_edid(connector, read_edid_block, priv);
 
-		valid_extensions++;
-	}
-
-	if (valid_extensions != block[0x7e]) {
-		block[EDID_LENGTH-1] += block[0x7e] - valid_extensions;
-		block[0x7e] = valid_extensions;
-		new = krealloc(block, (valid_extensions + 1) * EDID_LENGTH, GFP_KERNEL);
-		if (!new)
-			goto fail;
-		block = new;
-	}
-
-done:
 	if (priv->rev == TDA19988)
 		reg_set(priv, REG_TX4, TX4_PD_RAM);
 
-	return block;
-
-fail:
-	if (priv->rev == TDA19988)
-		reg_set(priv, REG_TX4, TX4_PD_RAM);
-	dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
-	kfree(block);
-	return NULL;
-}
-
-static int
-tda998x_encoder_get_modes(struct tda998x_priv *priv,
-			  struct drm_connector *connector)
-{
-	struct edid *edid = (struct edid *)do_get_edid(priv);
-	int n = 0;
-
-	if (edid) {
-		drm_mode_connector_update_edid_property(connector, edid);
-		n = drm_add_edid_modes(connector, edid);
-		priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid);
-		kfree(edid);
+	if (!edid) {
+		dev_warn(&priv->hdmi->dev, "failed to read EDID\n");
+		return 0;
 	}
 
+	drm_mode_connector_update_edid_property(connector, edid);
+	n = drm_add_edid_modes(connector, edid);
+	priv->is_hdmi_sink = drm_detect_hdmi_monitor(edid);
+	kfree(edid);
+
 	return n;
 }
 
-- 
Regards,

Laurent Pinchart

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2014-11-26 19:03 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-11-26 19:04 Laurent Pinchart [this message]
2014-11-26 19:59 ` [PATCH] drm: tda998x: Use drm_do_get_edid() Rob Clark
2014-11-27 10:42 ` Jean-Francois Moine
2014-12-23  9:46 ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1417028655-15933-1-git-send-email-laurent.pinchart+renesas@ideasonboard.com \
    --to=laurent.pinchart+renesas@ideasonboard.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=rmk+kernel@arm.linux.org.uk \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.