From: Jianqun Xu <jay.xu@rock-chips.com> To: lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz, tiwai@suse.de, sonnyrao@chromium.org, heiko@sntech.de Cc: linux-arm-kernel@lists.infradead.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-rockchip@lists.infradead.org, Jianqun Xu <jay.xu@rock-chips.com> Subject: [PATCH v2 1/2] ASoC: dt-bindings: rockchip-i2s: add an optional property "i2s_clk_out" Date: Wed, 3 Dec 2014 15:18:37 +0800 [thread overview] Message-ID: <1417591118-18695-2-git-send-email-jay.xu@rock-chips.com> (raw) In-Reply-To: <1417591118-18695-1-git-send-email-jay.xu@rock-chips.com> Add an property "i2s_clk_out", which enables to output clock to outside of rockchip SoCs. Let's make it optional since not each board needs it. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> --- Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 9b82c20..c8f5ac0 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -22,6 +22,10 @@ Required properties: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller +Optional property: +- "i2s_clk_out" : clock output to outside of chip, usally as master clock for audio + codec chip + Example for rk3288 I2S controller: i2s@ff890000 { @@ -32,6 +36,6 @@ i2s@ff890000 { #size-cells = <0>; dmas = <&pdma1 0>, <&pdma1 1>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_CLKOUT>; }; -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: jay.xu@rock-chips.com (Jianqun Xu) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 1/2] ASoC: dt-bindings: rockchip-i2s: add an optional property "i2s_clk_out" Date: Wed, 3 Dec 2014 15:18:37 +0800 [thread overview] Message-ID: <1417591118-18695-2-git-send-email-jay.xu@rock-chips.com> (raw) In-Reply-To: <1417591118-18695-1-git-send-email-jay.xu@rock-chips.com> Add an property "i2s_clk_out", which enables to output clock to outside of rockchip SoCs. Let's make it optional since not each board needs it. Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Reviewed-by: Doug Anderson <dianders@chromium.org> --- Documentation/devicetree/bindings/sound/rockchip-i2s.txt | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 9b82c20..c8f5ac0 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -22,6 +22,10 @@ Required properties: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller +Optional property: +- "i2s_clk_out" : clock output to outside of chip, usally as master clock for audio + codec chip + Example for rk3288 I2S controller: i2s at ff890000 { @@ -32,6 +36,6 @@ i2s at ff890000 { #size-cells = <0>; dmas = <&pdma1 0>, <&pdma1 1>; dma-names = "tx", "rx"; - clock-names = "i2s_hclk", "i2s_clk"; - clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; + clock-names = "i2s_hclk", "i2s_clk", "i2s_clk_out"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>, <&cru SCLK_I2S0_CLKOUT>; }; -- 1.9.1
next prev parent reply other threads:[~2014-12-03 7:20 UTC|newest] Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-12-02 14:49 [PATCH 0/2] rockchip: i2s: patches to add optional clock output from Jianqun Xu 2014-12-02 14:49 ` Jianqun Xu 2014-12-02 14:49 ` Jianqun Xu 2014-12-02 14:49 ` [PATCH 1/2] ASoC: rockchip-i2s: dt: add an optional property "i2s_clk_out" Jianqun Xu 2014-12-02 14:49 ` Jianqun Xu 2014-12-02 17:57 ` Doug Anderson 2014-12-02 17:57 ` Doug Anderson 2014-12-02 17:57 ` Doug Anderson 2014-12-02 14:52 ` [PATCH 2/2] ASoC: rockchip: i2s: add support for grabbing output clock to codec Jianqun Xu 2014-12-02 14:52 ` Jianqun Xu 2014-12-02 14:52 ` Jianqun Xu 2014-12-02 17:54 ` Doug Anderson 2014-12-02 17:54 ` Doug Anderson 2014-12-02 17:54 ` Doug Anderson 2014-12-03 1:03 ` Jianqun 2014-12-03 1:03 ` Jianqun 2014-12-03 1:03 ` Jianqun 2014-12-03 5:18 ` Doug Anderson 2014-12-03 5:18 ` Doug Anderson 2014-12-03 5:18 ` Doug Anderson 2014-12-03 12:55 ` Mark Brown 2014-12-03 12:55 ` Mark Brown 2014-12-03 12:55 ` Mark Brown 2014-12-03 7:18 ` [PATCH v2 0/2] ASoC: rockchip: i2s: driver could output "i2s-clk-out" optionally Jianqun Xu 2014-12-03 7:18 ` Jianqun Xu 2014-12-03 7:18 ` Jianqun Xu 2014-12-03 7:18 ` Jianqun Xu [this message] 2014-12-03 7:18 ` [PATCH v2 1/2] ASoC: dt-bindings: rockchip-i2s: add an optional property "i2s_clk_out" Jianqun Xu 2014-12-03 7:18 ` [PATCH v2 2/2] ASoC: rockchip: i2s: add support for grabbing output clock to codec Jianqun Xu 2014-12-03 7:18 ` Jianqun Xu 2014-12-03 7:18 ` Jianqun Xu 2014-12-03 19:20 ` Mark Brown 2014-12-03 19:20 ` Mark Brown 2014-12-03 19:38 ` Sonny Rao 2014-12-03 19:38 ` Sonny Rao 2014-12-03 19:38 ` Sonny Rao 2014-12-03 20:03 ` Mark Brown 2014-12-03 20:03 ` Mark Brown 2014-12-03 20:03 ` Mark Brown 2014-12-03 23:03 ` Sonny Rao 2014-12-03 23:03 ` Sonny Rao 2014-12-03 23:03 ` Sonny Rao 2014-12-03 23:22 ` [alsa-devel] " Dylan Reid 2014-12-03 23:22 ` Dylan Reid 2014-12-03 23:52 ` Sonny Rao 2014-12-03 23:52 ` Sonny Rao 2014-12-03 23:52 ` Sonny Rao
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1417591118-18695-2-git-send-email-jay.xu@rock-chips.com \ --to=jay.xu@rock-chips.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=perex@perex.cz \ --cc=sonnyrao@chromium.org \ --cc=tiwai@suse.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.