From: Michal Kazior <michal.kazior@tieto.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Michal Kazior <michal.kazior@tieto.com> Subject: [PATCH 1/5] ath10k: improve 11b coex Date: Wed, 10 Dec 2014 13:31:50 +0100 [thread overview] Message-ID: <1418214714-29689-2-git-send-email-michal.kazior@tieto.com> (raw) In-Reply-To: <1418214714-29689-1-git-send-email-michal.kazior@tieto.com> Some firmware revisions need peer phymode to be specified as MODE_11B when associating as station to a 11b AP. Otherwise they can starve other stations. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> --- drivers/net/wireless/ath/ath10k/mac.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index fe61201..950322d 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1416,6 +1416,12 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar, } } +static bool ath10k_mac_sta_has_11g_rates(struct ieee80211_sta *sta) +{ + /* First 4 rates in ath10k_rates are CCK (11b) rates. */ + return sta->supp_rates[IEEE80211_BAND_2GHZ] >> 4; +} + static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, struct ieee80211_vif *vif, struct ieee80211_sta *sta, @@ -1430,8 +1436,10 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, phymode = MODE_11NG_HT40; else phymode = MODE_11NG_HT20; - } else { + } else if (ath10k_mac_sta_has_11g_rates(sta)) { phymode = MODE_11G; + } else { + phymode = MODE_11B; } break; @@ -4724,6 +4732,9 @@ static const struct ieee80211_channel ath10k_5ghz_channels[] = { CHAN5G(165, 5825, 0), }; +/* Note: Be careful if you re-order these. There is code which depends on this + * ordering. + */ static struct ieee80211_rate ath10k_rates[] = { /* CCK */ RATETAB_ENT(10, 0x82, 0), -- 1.8.5.3
WARNING: multiple messages have this Message-ID (diff)
From: Michal Kazior <michal.kazior@tieto.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Michal Kazior <michal.kazior@tieto.com> Subject: [PATCH 1/5] ath10k: improve 11b coex Date: Wed, 10 Dec 2014 13:31:50 +0100 [thread overview] Message-ID: <1418214714-29689-2-git-send-email-michal.kazior@tieto.com> (raw) In-Reply-To: <1418214714-29689-1-git-send-email-michal.kazior@tieto.com> Some firmware revisions need peer phymode to be specified as MODE_11B when associating as station to a 11b AP. Otherwise they can starve other stations. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> --- drivers/net/wireless/ath/ath10k/mac.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index fe61201..950322d 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1416,6 +1416,12 @@ static void ath10k_peer_assoc_h_qos(struct ath10k *ar, } } +static bool ath10k_mac_sta_has_11g_rates(struct ieee80211_sta *sta) +{ + /* First 4 rates in ath10k_rates are CCK (11b) rates. */ + return sta->supp_rates[IEEE80211_BAND_2GHZ] >> 4; +} + static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, struct ieee80211_vif *vif, struct ieee80211_sta *sta, @@ -1430,8 +1436,10 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, phymode = MODE_11NG_HT40; else phymode = MODE_11NG_HT20; - } else { + } else if (ath10k_mac_sta_has_11g_rates(sta)) { phymode = MODE_11G; + } else { + phymode = MODE_11B; } break; @@ -4724,6 +4732,9 @@ static const struct ieee80211_channel ath10k_5ghz_channels[] = { CHAN5G(165, 5825, 0), }; +/* Note: Be careful if you re-order these. There is code which depends on this + * ordering. + */ static struct ieee80211_rate ath10k_rates[] = { /* CCK */ RATETAB_ENT(10, 0x82, 0), -- 1.8.5.3 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-12-10 12:44 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-12-10 12:31 [PATCH 0/5] ath10k: a bunch of STA-related fixes Michal Kazior 2014-12-10 12:31 ` Michal Kazior 2014-12-10 12:31 ` Michal Kazior [this message] 2014-12-10 12:31 ` [PATCH 1/5] ath10k: improve 11b coex Michal Kazior 2014-12-10 12:31 ` [PATCH 2/5] ath10k: fix STA u-APSD Michal Kazior 2014-12-10 12:31 ` Michal Kazior 2014-12-11 9:56 ` Michal Kazior 2014-12-11 9:56 ` Michal Kazior 2014-12-10 12:31 ` [PATCH 3/5] ath10k: prevent invalid ps timeout config Michal Kazior 2014-12-10 12:31 ` Michal Kazior 2014-12-10 12:31 ` [PATCH 4/5] ath10k: enable per-vif sta powersave Michal Kazior 2014-12-10 12:31 ` Michal Kazior 2014-12-10 12:31 ` [PATCH 5/5] ath10k: advertise p2p dev support Michal Kazior 2014-12-10 12:31 ` Michal Kazior 2014-12-12 11:41 ` [PATCH v2 0/5] ath10k: a bunch of STA-related fixes Michal Kazior 2014-12-12 11:41 ` Michal Kazior 2014-12-12 11:41 ` [PATCH v2 1/5] ath10k: improve 11b coex Michal Kazior 2014-12-12 11:41 ` Michal Kazior 2014-12-12 11:41 ` [PATCH v2 2/5] ath10k: fix STA u-APSD Michal Kazior 2014-12-12 11:41 ` Michal Kazior 2014-12-12 11:41 ` [PATCH v2 3/5] ath10k: prevent invalid ps timeout config Michal Kazior 2014-12-12 11:41 ` Michal Kazior 2014-12-12 11:41 ` [PATCH v2 4/5] ath10k: enable per-vif sta powersave Michal Kazior 2014-12-12 11:41 ` Michal Kazior 2014-12-12 11:41 ` [PATCH v2 5/5] ath10k: advertise p2p dev support Michal Kazior 2014-12-12 11:41 ` Michal Kazior 2014-12-16 7:27 ` [PATCH v2 0/5] ath10k: a bunch of STA-related fixes Kalle Valo 2014-12-16 7:27 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1418214714-29689-2-git-send-email-michal.kazior@tieto.com \ --to=michal.kazior@tieto.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.