From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Subject: [PATCH 1/8] ath10k: add wmi support for addba_clear_resp Date: Fri, 19 Dec 2014 12:24:52 +0530 [thread overview] Message-ID: <1418972099-5296-2-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1418972099-5296-1-git-send-email-rmanohar@qti.qualcomm.com> Add WMI support for clearing addba response before switching aggregation mode (auto/manual) for debugging purpose. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/wmi-ops.h | 18 ++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 + drivers/net/wireless/ath/ath10k/wmi.c | 27 +++++++++++++++++++++++++++ 3 files changed, 46 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h index 20e2c30..b161043 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h @@ -119,6 +119,8 @@ struct wmi_ops { u32 next_offset, u32 enabled); struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar); + struct sk_buff *(*gen_addba_clear_resp)(struct ath10k *ar, u32 vdev_id, + const u8 *mac); }; int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); @@ -857,4 +859,20 @@ ath10k_wmi_pdev_get_temperature(struct ath10k *ar) ar->wmi.cmd->pdev_get_temperature_cmdid); } +static inline int +ath10k_wmi_addba_clear_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac) +{ + struct sk_buff *skb; + + if (!ar->wmi.ops->gen_addba_clear_resp) + return -EOPNOTSUPP; + + skb = ar->wmi.ops->gen_addba_clear_resp(ar, vdev_id, mac); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + return ath10k_wmi_cmd_send(ar, skb, + ar->wmi.cmd->addba_clear_resp_cmdid); +} + #endif diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 4c050ce..499a779 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -2207,6 +2207,7 @@ static const struct wmi_ops wmi_tlv_ops = { .gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable, /* .gen_pdev_set_quiet_mode not implemented */ /* .gen_pdev_get_temperature not implemented */ + /* .gen_addba_clear_resp not implemented */ }; /************/ diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index f6b0de3..0053641 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4644,6 +4644,30 @@ ath10k_wmi_op_gen_pdev_set_quiet_mode(struct ath10k *ar, u32 period, return skb; } +static struct sk_buff * +ath10k_wmi_op_gen_addba_clear_resp(struct ath10k *ar, u32 vdev_id, + const u8 *mac) +{ + struct wmi_addba_clear_resp_cmd *cmd; + struct sk_buff *skb; + + if (!mac) + return ERR_PTR(-EINVAL); + + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); + if (!skb) + return ERR_PTR(-ENOMEM); + + cmd = (struct wmi_addba_clear_resp_cmd *)skb->data; + cmd->vdev_id = __cpu_to_le32(vdev_id); + ether_addr_copy(cmd->peer_macaddr.addr, mac); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi addba clear resp vdev_id 0x%X mac_addr %pM\n", + vdev_id, mac); + return skb; +} + static const struct wmi_ops wmi_ops = { .rx = ath10k_wmi_op_rx, .map_svc = wmi_main_svc_map, @@ -4695,6 +4719,7 @@ static const struct wmi_ops wmi_ops = { .gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable, .gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode, /* .gen_pdev_get_temperature not implemented */ + .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, }; static const struct wmi_ops wmi_10_1_ops = { @@ -4749,6 +4774,7 @@ static const struct wmi_ops wmi_10_1_ops = { .gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable, .gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable, .gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode, + .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, }; static const struct wmi_ops wmi_10_2_ops = { @@ -4804,6 +4830,7 @@ static const struct wmi_ops wmi_10_2_ops = { .gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable, .gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable, .gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode, + .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, }; int ath10k_wmi_attach(struct ath10k *ar) -- 2.2.0
WARNING: multiple messages have this Message-ID (diff)
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Subject: [PATCH 1/8] ath10k: add wmi support for addba_clear_resp Date: Fri, 19 Dec 2014 12:24:52 +0530 [thread overview] Message-ID: <1418972099-5296-2-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1418972099-5296-1-git-send-email-rmanohar@qti.qualcomm.com> Add WMI support for clearing addba response before switching aggregation mode (auto/manual) for debugging purpose. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/wmi-ops.h | 18 ++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 + drivers/net/wireless/ath/ath10k/wmi.c | 27 +++++++++++++++++++++++++++ 3 files changed, 46 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h index 20e2c30..b161043 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h @@ -119,6 +119,8 @@ struct wmi_ops { u32 next_offset, u32 enabled); struct sk_buff *(*gen_pdev_get_temperature)(struct ath10k *ar); + struct sk_buff *(*gen_addba_clear_resp)(struct ath10k *ar, u32 vdev_id, + const u8 *mac); }; int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); @@ -857,4 +859,20 @@ ath10k_wmi_pdev_get_temperature(struct ath10k *ar) ar->wmi.cmd->pdev_get_temperature_cmdid); } +static inline int +ath10k_wmi_addba_clear_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac) +{ + struct sk_buff *skb; + + if (!ar->wmi.ops->gen_addba_clear_resp) + return -EOPNOTSUPP; + + skb = ar->wmi.ops->gen_addba_clear_resp(ar, vdev_id, mac); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + return ath10k_wmi_cmd_send(ar, skb, + ar->wmi.cmd->addba_clear_resp_cmdid); +} + #endif diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 4c050ce..499a779 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -2207,6 +2207,7 @@ static const struct wmi_ops wmi_tlv_ops = { .gen_pktlog_disable = ath10k_wmi_tlv_op_gen_pktlog_disable, /* .gen_pdev_set_quiet_mode not implemented */ /* .gen_pdev_get_temperature not implemented */ + /* .gen_addba_clear_resp not implemented */ }; /************/ diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index f6b0de3..0053641 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4644,6 +4644,30 @@ ath10k_wmi_op_gen_pdev_set_quiet_mode(struct ath10k *ar, u32 period, return skb; } +static struct sk_buff * +ath10k_wmi_op_gen_addba_clear_resp(struct ath10k *ar, u32 vdev_id, + const u8 *mac) +{ + struct wmi_addba_clear_resp_cmd *cmd; + struct sk_buff *skb; + + if (!mac) + return ERR_PTR(-EINVAL); + + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); + if (!skb) + return ERR_PTR(-ENOMEM); + + cmd = (struct wmi_addba_clear_resp_cmd *)skb->data; + cmd->vdev_id = __cpu_to_le32(vdev_id); + ether_addr_copy(cmd->peer_macaddr.addr, mac); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi addba clear resp vdev_id 0x%X mac_addr %pM\n", + vdev_id, mac); + return skb; +} + static const struct wmi_ops wmi_ops = { .rx = ath10k_wmi_op_rx, .map_svc = wmi_main_svc_map, @@ -4695,6 +4719,7 @@ static const struct wmi_ops wmi_ops = { .gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable, .gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode, /* .gen_pdev_get_temperature not implemented */ + .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, }; static const struct wmi_ops wmi_10_1_ops = { @@ -4749,6 +4774,7 @@ static const struct wmi_ops wmi_10_1_ops = { .gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable, .gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable, .gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode, + .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, }; static const struct wmi_ops wmi_10_2_ops = { @@ -4804,6 +4830,7 @@ static const struct wmi_ops wmi_10_2_ops = { .gen_pktlog_enable = ath10k_wmi_op_gen_pktlog_enable, .gen_pktlog_disable = ath10k_wmi_op_gen_pktlog_disable, .gen_pdev_set_quiet_mode = ath10k_wmi_op_gen_pdev_set_quiet_mode, + .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, }; int ath10k_wmi_attach(struct ath10k *ar) -- 2.2.0 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-12-19 6:55 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-12-19 6:54 [PATCH 0/8] ath10k: add per station debugfs support Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan [this message] 2014-12-19 6:54 ` [PATCH 1/8] ath10k: add wmi support for addba_clear_resp Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 2/8] ath10k: add wmi support for addba_send Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 3/8] ath10k: add wmi support for addba_set_resp Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 4/8] ath10k: add wmi support for delba_send Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 5/8] ath10k: Implement sta_add_debugfs Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 6/8] ath10k: add support to send addba request Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 7/8] ath10k: add support to send addba response Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 8/8] ath10k: ath10k: add support to send delba Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-21 6:13 ` Manoharan, Rajkumar 2014-12-21 6:13 ` Manoharan, Rajkumar 2014-12-23 7:46 ` Kalle Valo 2014-12-23 7:46 ` Kalle Valo 2014-12-24 7:54 ` Rajkumar 2014-12-24 7:54 ` Rajkumar 2014-12-24 8:11 ` Kalle Valo 2014-12-24 8:11 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1418972099-5296-2-git-send-email-rmanohar@qti.qualcomm.com \ --to=rmanohar@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.