From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Subject: [PATCH 4/8] ath10k: add wmi support for delba_send Date: Fri, 19 Dec 2014 12:24:55 +0530 [thread overview] Message-ID: <1418972099-5296-5-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1418972099-5296-1-git-send-email-rmanohar@qti.qualcomm.com> Add WMI support for sending delba request. This command is used for debugging purpose. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/wmi-ops.h | 21 +++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 + drivers/net/wireless/ath/ath10k/wmi.c | 30 ++++++++++++++++++++++++++++++ 3 files changed, 52 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h index e8f49de..3a3d15e 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h @@ -126,6 +126,9 @@ struct wmi_ops { struct sk_buff *(*gen_addba_set_resp)(struct ath10k *ar, u32 vdev_id, const u8 *mac, u32 tid, u32 status); + struct sk_buff *(*gen_delba_send)(struct ath10k *ar, u32 vdev_id, + const u8 *mac, u32 tid, u32 initiator, + u32 reason); }; int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); @@ -914,4 +917,22 @@ ath10k_wmi_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac, ar->wmi.cmd->addba_set_resp_cmdid); } +static inline int +ath10k_wmi_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac, + u32 tid, u32 initiator, u32 reason) +{ + struct sk_buff *skb; + + if (!ar->wmi.ops->gen_delba_send) + return -EOPNOTSUPP; + + skb = ar->wmi.ops->gen_delba_send(ar, vdev_id, mac, tid, initiator, + reason); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + return ath10k_wmi_cmd_send(ar, skb, + ar->wmi.cmd->delba_send_cmdid); +} + #endif diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 63f9860..57d2b50 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -2210,6 +2210,7 @@ static const struct wmi_ops wmi_tlv_ops = { /* .gen_addba_clear_resp not implemented */ /* .gen_addba_send not implemented */ /* .gen_addba_set_resp not implemented */ + /* .gen_delba_send not implemented */ }; /************/ diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index b5a771f..98a7553 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4720,6 +4720,33 @@ ath10k_wmi_op_gen_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac, return skb; } +static struct sk_buff * +ath10k_wmi_op_gen_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac, + u32 tid, u32 initiator, u32 reason) +{ + struct wmi_delba_send_cmd *cmd; + struct sk_buff *skb; + + if (!mac) + return ERR_PTR(-EINVAL); + + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); + if (!skb) + return ERR_PTR(-ENOMEM); + + cmd = (struct wmi_delba_send_cmd *)skb->data; + cmd->vdev_id = __cpu_to_le32(vdev_id); + ether_addr_copy(cmd->peer_macaddr.addr, mac); + cmd->tid = __cpu_to_le32(tid); + cmd->initiator = __cpu_to_le32(initiator); + cmd->reasoncode = __cpu_to_le32(reason); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi delba send vdev_id 0x%X mac_addr %pM tid %u initiator %u reason %u\n", + vdev_id, mac, tid, initiator, reason); + return skb; +} + static const struct wmi_ops wmi_ops = { .rx = ath10k_wmi_op_rx, .map_svc = wmi_main_svc_map, @@ -4774,6 +4801,7 @@ static const struct wmi_ops wmi_ops = { .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, .gen_addba_send = ath10k_wmi_op_gen_addba_send, .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp, + .gen_delba_send = ath10k_wmi_op_gen_delba_send, }; static const struct wmi_ops wmi_10_1_ops = { @@ -4831,6 +4859,7 @@ static const struct wmi_ops wmi_10_1_ops = { .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, .gen_addba_send = ath10k_wmi_op_gen_addba_send, .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp, + .gen_delba_send = ath10k_wmi_op_gen_delba_send, }; static const struct wmi_ops wmi_10_2_ops = { @@ -4889,6 +4918,7 @@ static const struct wmi_ops wmi_10_2_ops = { .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, .gen_addba_send = ath10k_wmi_op_gen_addba_send, .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp, + .gen_delba_send = ath10k_wmi_op_gen_delba_send, }; int ath10k_wmi_attach(struct ath10k *ar) -- 2.2.0
WARNING: multiple messages have this Message-ID (diff)
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Rajkumar Manoharan <rmanohar@qti.qualcomm.com> Subject: [PATCH 4/8] ath10k: add wmi support for delba_send Date: Fri, 19 Dec 2014 12:24:55 +0530 [thread overview] Message-ID: <1418972099-5296-5-git-send-email-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <1418972099-5296-1-git-send-email-rmanohar@qti.qualcomm.com> Add WMI support for sending delba request. This command is used for debugging purpose. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/wmi-ops.h | 21 +++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 1 + drivers/net/wireless/ath/ath10k/wmi.c | 30 ++++++++++++++++++++++++++++++ 3 files changed, 52 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi-ops.h b/drivers/net/wireless/ath/ath10k/wmi-ops.h index e8f49de..3a3d15e 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-ops.h +++ b/drivers/net/wireless/ath/ath10k/wmi-ops.h @@ -126,6 +126,9 @@ struct wmi_ops { struct sk_buff *(*gen_addba_set_resp)(struct ath10k *ar, u32 vdev_id, const u8 *mac, u32 tid, u32 status); + struct sk_buff *(*gen_delba_send)(struct ath10k *ar, u32 vdev_id, + const u8 *mac, u32 tid, u32 initiator, + u32 reason); }; int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id); @@ -914,4 +917,22 @@ ath10k_wmi_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac, ar->wmi.cmd->addba_set_resp_cmdid); } +static inline int +ath10k_wmi_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac, + u32 tid, u32 initiator, u32 reason) +{ + struct sk_buff *skb; + + if (!ar->wmi.ops->gen_delba_send) + return -EOPNOTSUPP; + + skb = ar->wmi.ops->gen_delba_send(ar, vdev_id, mac, tid, initiator, + reason); + if (IS_ERR(skb)) + return PTR_ERR(skb); + + return ath10k_wmi_cmd_send(ar, skb, + ar->wmi.cmd->delba_send_cmdid); +} + #endif diff --git a/drivers/net/wireless/ath/ath10k/wmi-tlv.c b/drivers/net/wireless/ath/ath10k/wmi-tlv.c index 63f9860..57d2b50 100644 --- a/drivers/net/wireless/ath/ath10k/wmi-tlv.c +++ b/drivers/net/wireless/ath/ath10k/wmi-tlv.c @@ -2210,6 +2210,7 @@ static const struct wmi_ops wmi_tlv_ops = { /* .gen_addba_clear_resp not implemented */ /* .gen_addba_send not implemented */ /* .gen_addba_set_resp not implemented */ + /* .gen_delba_send not implemented */ }; /************/ diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index b5a771f..98a7553 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -4720,6 +4720,33 @@ ath10k_wmi_op_gen_addba_set_resp(struct ath10k *ar, u32 vdev_id, const u8 *mac, return skb; } +static struct sk_buff * +ath10k_wmi_op_gen_delba_send(struct ath10k *ar, u32 vdev_id, const u8 *mac, + u32 tid, u32 initiator, u32 reason) +{ + struct wmi_delba_send_cmd *cmd; + struct sk_buff *skb; + + if (!mac) + return ERR_PTR(-EINVAL); + + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd)); + if (!skb) + return ERR_PTR(-ENOMEM); + + cmd = (struct wmi_delba_send_cmd *)skb->data; + cmd->vdev_id = __cpu_to_le32(vdev_id); + ether_addr_copy(cmd->peer_macaddr.addr, mac); + cmd->tid = __cpu_to_le32(tid); + cmd->initiator = __cpu_to_le32(initiator); + cmd->reasoncode = __cpu_to_le32(reason); + + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi delba send vdev_id 0x%X mac_addr %pM tid %u initiator %u reason %u\n", + vdev_id, mac, tid, initiator, reason); + return skb; +} + static const struct wmi_ops wmi_ops = { .rx = ath10k_wmi_op_rx, .map_svc = wmi_main_svc_map, @@ -4774,6 +4801,7 @@ static const struct wmi_ops wmi_ops = { .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, .gen_addba_send = ath10k_wmi_op_gen_addba_send, .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp, + .gen_delba_send = ath10k_wmi_op_gen_delba_send, }; static const struct wmi_ops wmi_10_1_ops = { @@ -4831,6 +4859,7 @@ static const struct wmi_ops wmi_10_1_ops = { .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, .gen_addba_send = ath10k_wmi_op_gen_addba_send, .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp, + .gen_delba_send = ath10k_wmi_op_gen_delba_send, }; static const struct wmi_ops wmi_10_2_ops = { @@ -4889,6 +4918,7 @@ static const struct wmi_ops wmi_10_2_ops = { .gen_addba_clear_resp = ath10k_wmi_op_gen_addba_clear_resp, .gen_addba_send = ath10k_wmi_op_gen_addba_send, .gen_addba_set_resp = ath10k_wmi_op_gen_addba_set_resp, + .gen_delba_send = ath10k_wmi_op_gen_delba_send, }; int ath10k_wmi_attach(struct ath10k *ar) -- 2.2.0 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-12-19 6:56 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-12-19 6:54 [PATCH 0/8] ath10k: add per station debugfs support Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 1/8] ath10k: add wmi support for addba_clear_resp Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 2/8] ath10k: add wmi support for addba_send Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 3/8] ath10k: add wmi support for addba_set_resp Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan [this message] 2014-12-19 6:54 ` [PATCH 4/8] ath10k: add wmi support for delba_send Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 5/8] ath10k: Implement sta_add_debugfs Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 6/8] ath10k: add support to send addba request Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 7/8] ath10k: add support to send addba response Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-19 6:54 ` [PATCH 8/8] ath10k: ath10k: add support to send delba Rajkumar Manoharan 2014-12-19 6:54 ` Rajkumar Manoharan 2014-12-21 6:13 ` Manoharan, Rajkumar 2014-12-21 6:13 ` Manoharan, Rajkumar 2014-12-23 7:46 ` Kalle Valo 2014-12-23 7:46 ` Kalle Valo 2014-12-24 7:54 ` Rajkumar 2014-12-24 7:54 ` Rajkumar 2014-12-24 8:11 ` Kalle Valo 2014-12-24 8:11 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1418972099-5296-5-git-send-email-rmanohar@qti.qualcomm.com \ --to=rmanohar@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.